RUGGED RIDGE 11549.11 Arcus Front Bumper

RUGGED RIDGE 11549.11 Arcus Front Bumper

Bumper Components

  1. Bumper Shell (1)
  2. Right Fog Light Bracket (1)
  3. Left Fog Light Bracket (1)
  4. Tow Hook (2)
  5. Winch Tray (1)
  6. Winch Tray Bracket (1)
  7. Winch Tray Nut Plate (2)
  8. M12 Socket Head Bolt (8)
  9. M12 Washer (8)
  10. Nut Plate (2)
  11. M4 Button Head Bolt (8)
  12. M4 Washer (8)
  13. M4 Nut (8)
  14. M10 Washer (2)
  15. M10 Nut (4)
  16. M10 Hex Head Bolt (6)
    Product Description

ATT: STATE OF CALIFORNIA CONSUMERS

Symbol WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

Tube Overrider Components

  1. Tube Overrider (1)
  2. Right Overrider Mounting Bracket (1)
  3. Left Overrider Mounting Bracket (1)
  4. M10 Washer (4)
  5. M10 Nut (2)
  6. Nut Plate (2)
  7. M10 Bolt (2)
    Tube Overrider Components

Symbol Only included with part # 11549.13 and 11549.14

Assembly and Installation Instructions

  1. Disconnect OE Fog Lights from vehicle and remove factory Bumper, Lower Air Dam, plastic Cover Panel, and Tow Hooks. Remove OE Fog Light Housings from factory Bumper.
  2. Using supplied M4 hardware, attach Fog Light to Fog Light Bracket.
    Assembly and Installation Instructions
  3. Using supplied M10 hardware, loosely attach Winch Tray Bracket to Winch Tray.
    Assembly and Installation Instructions
    Symbol If installing on a 07-11 Jeep Wranglers, skip to Step 5.
  4. Unbolt factory vacuum pump canister.
    Assembly and Installation Instructions
  5. Attach Winch Tray to frame horns by using supplied Winch Tray Nut Plate and M10 Hardware. Remount factory vacuum pump canister.
  6. Follow Winch manufacturer’s instructions, install winch.
    Assembly and Installation Instructions
    Symbol Make sure to tighten all Winch mounting hardware at this time. It will be difficult to access them once the bumper is fully installed.
    Symbol If not installing Tube Overrider, Skip to Step 8.
  7. Using supplied M10 hardware and Nut Plate, attach Overrider Mounting Bracket to frame horn.
    Assembly and Installation Instructions
  8. Position Bumper Shell and Tow Hooks into place on vehicle’s frame rails. Using supplied M12 hardware and Nut Plates, loosely attach Bumper Shell and Tow Hooks using center four holes.
    Assembly and Installation Instructions
  9. Loosely attach Light Bracket using supplied M12 hardware.
    Assembly and Installation Instructions
  10. Position Tube Overrider and Rubber Spacer to align with Overrider Mounting Bracket and Bumper Shell. Using supplied M10 Nut and Washer, loosely attach Overrider.
    Assembly and Installation Instructions
  11. Attach fairlead to Bumper Shell and finish completing Winch installation.
  12. Tighten all nuts and bolts.
    Assembly and Installation Instructions

Customer Support

OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST 1-800-449-6649
FOR WARRANTY OR TECH CONCERNS EMAIL: webmaster@omixsupport.com

460 HORIZON DR. | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 844-270-0593 | www.Omix-ADA.com

Copyright © 2019 Omix-Ada®, Inc.

Logos

Documents / Resources

RUGGED RIDGE 11549.11 Arcus Front Bumper [pdf] Installation Guide
11549.11 Arcus Front Bumper, 11549.11, Arcus Front Bumper, Front Bumper, Bumper

References

Leave a comment

Your email address will not be published. Required fields are marked *