Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-LOGO

Etekcity EKS-L221-SUS Luminary Kitchen Scale

Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-PRODUCT

Product Specifications

  • Models: EKS-L221-SUS, EKS-L221-BUSR
  • Weight Capacity: 353 oz / 22 lb / 10 kg / 10000 mL
  • Units: oz/lb: oz / g / mL (water/milk) / fl’oz (water/milk)
  • Increments: 0.05 oz / 1 g
  • Auto-Off: 180 seconds
  • Battery: 300mAh Li-ion Battery
  • Input: 5.0V 500mA (USB Type-C Charging)
  • Dimensions: 9.1 x 6.7 x 1.1 in / 230 x 170 x 27 mm

Product Usage Instructions

General Operation

  1. Place the scale on a hard, flat surface.
  2. Tap the power/zero button to turn on the scale. Make sure the display reads 0.00.
  3. Tap the unit selection button to select your desired measuring unit, which will show on the right of the display.
    • Note: Optionally, press and hold the unit selection button to quickly switch between units.
  4. Place your item on the scale.
  5. Wait for the reading on the display to show.
  6. When you’re done, reset the scale by removing all items from the scale. If the display doesn’t read 0.00, press the power/zero button to reset the weight to zero.

Zero / Tare Function

  1. Tap the power/zero button to turn on the scale. Make sure the display reads 0.00. If the screen does not display 0.00 automatically, tap the power/zero button to adjust to zero.
  2. Place the container in the center of the scale.
  3. Wait for the reading on the display to show the container’s weight.
  4. Tap the power/zero button to take the weight of the container. The screen will now display 0.00.
  5. Place the liquid or items into the container. The scale will measure the contents without including the weight of the container.
  6. When you’re done, reset the scale by removing all weights and tapping the power/zero button again.

Thank you for purchasing the Luminary™ Kitchen Scale by Etekcity.
If you have any questions or concerns, please reach out to our helpful Customer Support Team at support@etekcity.com. We hope you enjoy your new kitchen scale!

Package Contents

  • 1 x Luminary™ Kitchen Scale
  • 1 x USB Charging Cable
  • 1 x Quick Start Guide

Specifications

  • Models: EKS-L221-SUS, EKS-L221-BUSR
  • Weight Capacity: 353 oz / 22 lb / 10 kg / 10000 mL
  • Units”: oz/lb:oz / g / mL (water/milk) /fl’oz (water/milk)
  • Increments: 0.05 oz / 1 g
  • Auto-Off: 180 seconds
  • Battery: 300mAh Li-ion Battery
  • Input: 5.0V 500mA (USB Type-C Charging)
  • Dimensions: 9.1 x 6.7 x 1.1 in / 230 x 170 x 27 mm

READ AND SAVE THESE INSTRUCTIONS

Important Safety Information

Please read and follow all instructions and safety guidelines in this manual.

Scale

  • Do not exceed the 22 lb / 10 kg weight capacity, as it will damage the scale. An error indicator will appear on the LED display if the limit is exceeded.
  • Do not immerse the scale in water or any liquid. If the liquid is spilled on the digital display or buttons, immediately wipe the scale dry with a soft cloth to avoid internal damage.
  • The scale is IPX6 water resistant, which means it can withstand most liquid spills without permanent damage. However, we still recommend wiping the scale dry with a soft cloth after any spills to keep it in optimal condition.
  • Handle with care. This scale is not intended for commercial or heavy-duty use.
  • Keep the scale in a cool, dry place. Avoid exposure to damp environments or extreme temperatures.
  • Household use only.

SAVE THESE INSTRUCTIONS

Function Diagram

Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-1

  • A. LED Display
  • B. Unit Selection Button
  • C. Power/Zero Button
  • D. Locking Key (Hold Button)
  • E. USB Charging Port
  • F. Anti-Skid Pads

Display Diagram

Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-2

  • A. Battery Indicator
  • B. Milk
  • C. Water (Liquid)
  • D. Tare Indicator
  • E. Weight Value
  • F. Measurement Unit
  • G. Hold Indicator

Using Your Scale

Note:

  • For accurate results, always place the scale on a hard, flat surface, and keep the scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference.
  • When you turn on the scale, choose units, or use the tare function, wait for the display to read “0.00” before measuring.

General Operation

  1. Place the scale on a hard, flat surface.
  2. Tap Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 to turn on the scale. Make sure the display reads “0.00”.
  3. Tap UNIT to select your desired measuring unit, which will show on the right of the display
    Note: Optionally, press and hold UNIT to quickly switch between units
  4. Place your item on the scale.
  5. Wait for the reading on the display to show.
  6. When you’re done, reset the scale by removing all items from the scale. If the display doesn’t read “0.00”, press Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 to reset the weight to zero.

Zero / Tare Function
Whenever you measure items inside a container, you can use the tare function to remove the container’s weight from the final measurement.

  1. Tap Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 to turn on the scale. Make sure the display reads “0.00”. If the screen does not display “0.00” automatically, tap to Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 adjust to zero.
  2. Place the container on the center of the scale.
  3. Wait for the reading on the display to show the container’s weight.
  4. TapEtekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 tare the weight of the container. The screen will now display “0.00”.
  5. Place the liquid or items into the container. The scale will measure the contents without including the weight of the container.
  6. When you’re done, reset the scale by removing all weight and tapping Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 again

Unit Conversion

  • To change the unit of measurement, tap UNIT until the display shows your desired unit of measurement.
  • Optionally, press and hold UNIT to quickly switch between units.

Hold Function

  • Tap HOLD to lock the measurement data on the display. Tap HOLD again to unlock the display.

Note: In hold mode, Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 will not work. You can still use UNIT to switch between units.

Automatic Power Off
To save battery power, the scale will automatically power off after 180 seconds of inactivity.

Manual Power Off

  • Tap and hold Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-3 for 2 seconds to turn off the scale.

Battery And Maintenance

Battery

While the scale is in use, Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-4 will flash if the scale is running low on battery. The scale’s display will show “Lo” when the battery needs to be charged immediately. Follow the steps to recharge the battery.

  1. Insert the USB charging cable into the USB charging socket.
  2. Plug the USB charging cable into a DC 5V adapter and plug it into an outlet. You can also plug the cable into a powered USB outlet.
  3. When charging, Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-4 will flash. Once the battery is fully charged,Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-4 will stop flashing.

Note

  • The scale can’t be used while charging, so it is recommended to charge the battery when Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-4 flashes, indicating a low battery.

Maintenance

  • Use a slightly damp cloth to clean the surface of the scale, followed by a dry, soft cloth to wipe away the remaining moisture.
  • Use a dry, soft cloth to wipe dust off the scale.
  • Do not wash the scale or immerse it in water or any other liquid.

Troubleshooting

Problem Possible Solution
 

The scale does not turn on.

The scale may need to be charged. Plug in the USB power cord to charge.
 

 

 

Reading is inaccurate.

Place the scale on a level surface.
Keep scale away from dirt, dust, vibrations, wind, air currents, and electromagnetic interference.
Make sure the screen displays “0.00” before measuring

(see Zero / Tare Function,).

 

The display shows “Err”

The item is too heavy. Remove the item from the scale to protect its weight sensor. Use a different scale with a higher weight range.
 

 

Battery Indicator is

flashing

1.   A flashing Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-4  while the scale is in use means the battery is low. It is recommended to charge the battery.

2.    A flashing Etekcity-EKS-L221-SUS-Luminary-Kitchen-Scale-FIG-4 while charging means the scale is still charging and will stop flashing when the battery is fully charged.

 

The display shows “Lo”

The battery is out of power and needs to be charged immediately. Plug in the USB power cord to charge the scale (see Battery.

If your problem is not listed, please contact Customer Support.

FCC STATEMENT

Federal Communication Commission Interference Statement – Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY
Etekcity Corporation hereby declares that this equipment complies with FCC requirements. The declaration of conformity may be consulted in the support section of our website, accessible from www.etekcity.com

Warranty Information

Product Luminary™ Kitchen Scale
Models EKS-L221-SUS, EKS-L221-BUSR
For your own reference, we strongly recommend that you record your order ID and date of purchase.
Order ID
Date of Purchase

TERMS & POLICY
Etekcity Corporation (“Etekcity”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 2 years from the date of original purchase.
Etekcity agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase.

There is no other express warranty. This warranty does not apply:

  • If the product has been modified from its original condition;
  • If the product has not been used by directions and instructions in the user manual;
  • To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
  • To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than Etekcity;
  • To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
  • To damages or defects exceeding the cost of the product.
  1. Etekcity will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty.
  2. This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty.
  3. This warranty does not extend to products purchased from unauthorized sellers. Etekcity’s warranty extends only to products purchased from authorized sellers that are subject to Etekcity’s quality controls and have agreed to follow its quality controls.
  4. All implied warranties are limited to the period of this limited warranty.
  5. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
  6. If you discover that your product is defective within the specified warranty period, please contact Customer Support via support@etekcity.com.
  7. DO NOT dispose of your product before contacting us. Once our Customer Support Team has approved your request, please return the product with a copy of the invoice and order ID.
  8. Every Etekcity product automatically includes a 2-year warranty. To make the customer support process quick and easy, register your product online at www.etekcity.com/warranty.

This warranty is made by:

  • Etekcity Corporation
  • 1202 N. Miller St., Suite A
  • Anaheim, CA 92806

FAQ

  • Q: How do I charge the scale?
  • A: Use the provided USB charging cable and connect it to a power source with an output of 5.0V and 500mA.
  • Q: Can I measure liquids with this scale?
  • A: Yes, you can measure liquids in milliliters or fluid ounces (water/milk).
  • Q: Can I measure the weight of multiple items at once?
  • A: Yes, you can place multiple items on the scale to measure their combined weight.
  • Q: How do I switch between units quickly?
  • A: Press and hold the unit selection button to quickly switch between units.
  • Q: How do I reset the weight to zero?
  • A: Remove all items from the scale and press the power/zero button to reset the weight to zero.

Customer Support

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806

Support Hours
Mon–Fri, 9:00 am–5:00 pm PST/PDT
Please have your order invoice and order ID ready before contacting Customer Support.

Connect with us @Etekcity
MF062722AC-M1.1_0821EKS-L221_shared_WEB

Documents / Resources

Etekcity EKS-L221-SUS Luminary Kitchen Scale [pdf] User Manual
EKS-L221-SUS, EKS-L221-BUSR, EKS-L221-SUS Luminary Kitchen Scale, Luminary Kitchen Scale, Kitchen Scale, Scale

References

Leave a comment

Your email address will not be published. Required fields are marked *