Product Information
- Specifications
- Product Name: Single Push Button with LED and Comfort Sensors for Niko Home Control
- Colour: Light Grey
- Model Number: 102-52201
- Features: Easy click-on mechanism, LED indicator, comfort sensors
Product Usage Instructions
- Installation
- Ensure the power supply is switched off before installation.
- Remove the existing switch or button from the wall.
- Connect the wires to the designated terminals on a single push button.
- Securely mount the single push button onto the wall using appropriate screws.
- Turn on the power supply and test the functionality of the push button.
- Operation
- To turn on or off the connected device, simply press the push button once. The LED indicator will provide visual feedback.
- Maintenance
- Regularly clean the push button using a soft, dry cloth to prevent dust build-up and maintain its appearance.
- Troubleshooting
- If the push button is not functioning correctly, check the wiring connections and ensure the power supply is stable. Contact customer support if issues persist.
FAQs
- Q: Can I use this push button with other home automation systems?
- A: The single push button is designed specifically for Niko Home Control and may not be compatible with other systems.
- Q: How do I change the battery in the comfort sensor?
- A: The comfort sensor does not require a separate battery as it is powered by the main unit.
- Q: Is it possible to adjust the sensitivity of the comfort sensors?
- A: The sensitivity of the comfort sensors is pre-set and cannot be adjusted manually.
PRODUCT INTRODUCTION
- This single push button can be configured to control a variety of actions and routines in a Niko Home Control II installation on bus wiring.
- It is fitted with a programmable LED that provides (inverted) feedback on the action that is being performed. In addition, the push button can serve as an orientation light when the LED is ON.
- Thanks to its integrated temperature and humidity sensor, the push button also supports multi-zone climate and ventilation control, allowing you to increase your energy efficiency and overall comfort.
- Its multi-purpose temperature sensor can be set to control a heating/cooling zone within a Niko Home Control II installation, as a basic thermometer (Niko Home Control programming software version 2.20) or to create certain conditions (e.g. control sunscreens) (Niko Home Control programming software version 2.19)
- The humidity sensor can also be used within routines (Niko Home Control programming software version 2.20), for example, to perform automatic ventilation control in a bathroom or toilet The single push button features an easy click-on mechanism for wall-mounted bus wiring controls and is available in all Niko finishings.
Technical Data
Single push button with LED and comfort sensors for Niko Home Control, light grey.
- Function
- Combine the push button’s temperature sensor with a heating or cooling module for multi-zone control or a switching module for electrical heating
- Combine its integrated humidity sensor with a ventilation module to perform automatic ventilation control
- Setpoints and week programmes are managed via the app
- Calibration is managed via the programming software
- Maximum number of push buttons set as a temperature sensor per installation: 20
- Temperature sensor range: 0 – 40°C
- Temperature sensor accuracy: ± 0.5°C
- Humidity sensor range: 0 – 100 % RH (non-condensing, nor icing)
- Humidity sensor accuracy: ± 5 %, between 20 – 80 % RH at 25°C
- Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
- Lens: The key on the push button is fitted at the bottom with a small amber-coloured LED (1.5 x 1.5 mm) to indicate the status of the action.
- Colour: light grey (coloured in mass, approximately NCS S 1002 – Y, RAL 080 80 05)
- Fire safety
- the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
- – the plastic parts of the central plate are halogen-free
- Input voltage: 26 Vdc (SELV, safety extra-low voltage)
- Dismantling: To dismount simply pull the push button off the wall-mounted printed circuit board.
- Protection degree: IP20
- Protection degree: IP40 for the combination of a mechanism and faceplate
- Impact resistance: After mounting, an impact resistance of IK06 is guaranteed.
- Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
- Marking: CE
Documents / Resources
 |
niko 102-52201 Single Push Button With Led and Comfort Sensors For Niko Home Control [pdf] Instruction Manual 102-52201 Single Push Button With Led And Comfort Sensors For Niko Home Control, 102-52201, Single Push Button With Led And Comfort Sensors For Niko Home Control, Button With Led And Comfort Sensors For Niko Home Control, And Comfort Sensors For Niko Home Control, Niko Home Control, Home Control |
