BOYA BY-V1-TX Ultracompact 2.4GHz Wireless Microphone System Instruction Manual
General Introduction
Thanks for choosing BOYA! The BY-V is an ultracompact and portable 2.4GHz wireless microphone system, compatible with smartphones, tablets, PC and more. It features automatic pairing and optional noise reduction and still can record 48kHz/16bit lossless audio after noise reduction. The BY-V is ideal for remote teaching, live streaming, vlog shooting, mobile journalism and much more.
The transmitters, with a 360° rotating back clip, support up to 9 hours of runtime. The receivers are device powered and have USB-C charging ports, which support charging and powering of devices while in use.
Cautions
- Non-professional teardown is strictly prohibited.
- Please keep it away from heat sources such as radiators or spotlights.
- Do not remove the battery without professionals’ help.
- Please clean the device with only a soft, dry cloth.
- When using and storing, please keep away from the dust and moisture.
- For the best pick-up pattern, do not hold your hand against the microphone capsule cover.
Product Structure
BY-V1-TX/BY-V2-TX: Wireless Transmitter
- Built-in Microphone
- Status Indicator
Status Indicator Unpaired Blinking blue and red alternately Paired Successfully Static blue Mute Blinking blue Noise Reduction ON Static green Low Battery Blinking red Charging Static red Fully Charged Red light off
Note:
- if charging the unit when it is ON, the indicator will display the current working status instead of charging status.
- Please charge the transmitter in time when in a low battery status, or it will auto shut off within 10 mins. 3) The function of noise reduction cannot be turned on or off in mute mode.
- NR Button
Press to turn on or off the function of noise reduction. - Power Button
- Press and hold for 2 seconds to power on or off.
- Press to mute or unmute the microphone.
- Belt Clip
It can rotate 360 degrees. - USB-C Charging Port
For charging the transmitter.
- Foam Windscreen
BY-V�-RX/ BY-V�-RX: Compact Receiver with Lightning Connector
Status Indicator
Status | Indicator |
Unpaired | Blinking blue |
Paired Successfully | Static blue |
MFi Certified Lightning Connector
It can be connected to an iOS Lightning device
USB-C Charging Port
When the BY-V�-RX or BY-V�-RX is plugged into an external device, the external device can be powered via this charging port.
Note:
iPhones and iPads can be powered and charged through this port while in use, which also supports up to �A charging current.
BY-V��-RX/ BY-V��-RX: Compact Receiver with USB-C Connector
Status Indicator
Status | Indicator |
Unpaired | Blinking blue |
Paired Successfully | Static blue |
USB-C Connector
It can be connected to an Android Smartphone, Tablet, Computer and other USB-C devices.
USB-C Charging Port
When the BY-V��-RX or BY-V��-RX is plugged into an external device, the external device can be powered via this charging port.
Note:
Most USB-C devices can be powered and charged through this port while in use.
How to use
For the kit of BY-V1/BY-V10
- Press and hold the power button for 2 seconds to turn on the BY-V1-TX transmitter.
- Plug the BY-V1-RX into an IOS Lightning device or the BY-V10-RX into a USB-C device.
- Transmitter and receiver will be successfully paired within 10 seconds.
- You are ready to record.
For the kit of BY-V2/BY-V20
- Press and hold the power button for 2 seconds to turn on two BY-V2-TX transmitters.
- Plug the BY-V2-RX into an iOS Lightning device or the BY-V20-RX into a USB-C device.
- Transmitters and receiver will be successfully paired within 10 seconds.
- You are ready to record.
Note:
Due to 2.4GHz wireless frequency, signal can be easily attenuated. Please try to avoid obstacles, such as walls and buildings, and avoid close proximity to devices with 2.4GHz signal, such as high-power Wi-Fi antennas, radios, etc.
Specifications
Poplar PatternFrequency Response | Omnidirectional20Hz-16kHz |
Signal-to-noise Ratio | 80dB |
Sensitivity | -42dB |
Operating Range | 50m (without obstacles) |
RF Output Power | 6dBm |
Charging Port | USB-C |
Transmitter’s Battery Capacity | 95mAh |
Transmitter’s Charging Time | Approx. 2 hours |
Transmitter’s Battery Life | Approx. 9 hours |
Receiver’s Power Requirement | Supplied by External Devices |
BY-V1-TX/ BY-V2-TX: 9.5g | |
Weight | BY-V1-RX/ BY-V2-RX: 6g |
BY-V10-RX/ BY-V20-RX: 6g | |
BY-V1-TX/ BY-V2-TX: 52.22×25.23×19.75mm | |
Dimensions | BY-V1-RX/ BY-V2-RX: 43.92×23.5×9.3mm |
BY-V10-RX/ BY-V20-RX: 43.92×24.7×9.3mm | |
Packing List
BY-V1
BY-V1-TX Transmitter X1
BY-V1-RX Receiver X1
USB-C Charging Cable X1
Foam Windscreen X1
BY-V10
BY-V1-TX Transmitter X1
BY-V10-RX Receiver X1
USB-C Charging Cable ×1
Foam Windscreen X1
BY-V2
BY-V2-TX Transmitter X2
BY-V2-RX Receiver X1
USB-C Charging Cable X2
Foam Windscreen X2
Documents / Resources
BOYA BY-V1-TX Ultracompact 2.4GHz Wireless Microphone System [pdf] Instruction Manual BY-V1-TX Ultracompact 2.4GHz Wireless Microphone System, BY-V1-TX, Ultracompact 2.4GHz Wireless Microphone System, Wireless Microphone System, Microphone System, System |