SpaDepot 5.5kW Flow-Thru Universal 10 Spa Heater Element
Product Information
Specifications
- Manufacturer: SpaDepot.com
- Model: Heater Element Replacement Kit
- Parts Included: O-Ring (2ea), Nut 1/2x 20 (2ea), Nut K-Lock #10-32 (2ea)
- Torque Settings: 3/4 Bulkhead Nuts = 15 ft/lbs, 3/8 Terminal Nuts = 20 in/lbs
Product Usage Instructions
Step 1 – Install O-Rings
- Install O-rings (A) onto element bulkheads.
Step 2 – Reinstall Heater Wiring
- Reinstall heater wiring onto terminals and secure with nuts (C).
- Torque nuts to 20 in/lbs.
Step 3 – Install New Heater Element
- Install bulkhead nuts (B) and torque to 15 ft/lbs.
- Carefully insert the new heater element ensuring it is centered in the housing.
- Hold the Bottom Hex (x) with a 1/4 open-end wrench when tightening the Terminal Nut to prevent rotation and damage to the epoxy end seal.
FAQ
Q: What should I do if leaks occur after replacing the heater element?
A: Ensure that all inner and outer sealing surfaces are clean and free of debris before installing the new o-rings and elements to prevent leaks.
HEATER ELEMENT REPLACEMENT INSTRUCTIONS
CAUTION – After removing the defective element, ensure that all inner and outer sealing surfaces are clean and free of debris before installing the new o-rings, and element or leaks may occur.
WARNING: Hold the Bottom Hex (x) with a 1/4” open-end wrench when tightening the Terminal Nut to prevent rotation and ! damage to the epoxy end seal.
PARTS INCLUDED
- (A) – 60-0022 – O-Ring (2ea)
- (B) – 01-0010 – Nut, 1/2″x 20 (2ea)
- (C) – 01-0035 – Nut, K-Lock #10-32 (2ea)
TORQUE SETTINGS
- 3/4” Bulkhead Nuts = 15 ft/lbs
- 3/8” Terminal Nuts = 20 in/lbs
- SpaDepot.com
Documents / Resources
 |
SpaDepot 5.5kW Flow Thru Universal 10 Spa Heater Element [pdf] Instruction Manual 5.5kW Flow Thru Universal 10 Spa Heater Element, 5.5kW, Flow Thru Universal 10 Spa Heater Element, Universal 10 Spa Heater Element, Spa Heater Element, Heater Element, Element |
