Timer Remote Series Electronic Timer Remotes
Instruction Manual
PHOTO ACCESSORY
OPERATING MANUAL FOR
ELECTRONIC TIMER REMOTES
SAFETY INSTRUCTIONS
Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.
- Do not disassemble or modify the device.
- Do not allow water to penetrate
- Do not use near flammable gases.
- Do not expose to high temperatures.
- Keep out of the reach of children.
- Do not short circuit.
- Switch off/ unplug immediately in the event of a fault.
- Use the batteries in accordance with their instructions for use.
- Insert the batteries with the correct polarity.
- Remove the batteries if you do not plan to use the device for a long time.
DEVICE DESCRIPTION
1. Connector 2. Cable 3. Diode 4. Display |
5. Start/ stop timer 6. Set 7. Backlight / Lockout 8. Directional arrows |
9. Shutter release 10. Battery compartment cover 11. Lanyard clip |
Display:
1. Cursor 2. Time 3. Lock indicator 4. Low indicator battery levels |
5. Timer indicator 6.Sound 7. Set 8. Open shutter 9. Number of photos |
The device is not equipped with a switch. In To save battery power, make sure the TIMER ACTIVE, SET, and RELEASE indicators are turned off.
To switch on the illumination – briefl press the illumination/ lock button.
To lock the buttons – press and hold the light /lock button until the “L” icon appears on the display.
SPECIFICATION
Supported cameras: | according to the connector fitment |
Delay: | O s to 99 h 59 min 59 sat second intervals |
Exposure time: | 0 s to 99 h 59 min 59 sat second intervals |
Interval: | 1 s to 99 h 59 min 59 s at second intervals |
Number of photos: | 1 do 399, unlimited |
Power: | 2 x AAA 1.5 V LR03 alkaline |
Ambient operating temperature | -209C–+50 C |
Dimensions | 15,5 cm x 4 cm x 1,8 cm |
Weight: | 84g |
Cable length: | 94cm |
- Specifications and device design are subject to change without notice.
HOW TO USE
In order to connect the cable to the camera:
- Turn off the camera.
- Make sure that the TIMER ACTIVE, SET. and RELEASE indicators are off.
- Connect the cable connector to the socket on the device.
Electronic remote release cable can be used as:
Timer — the ability to program a delayed trigger, exposure, intervals, number of photos.
Manual shutter release –– for manual triggering of remote shutter release.
- Settings on the camera:
• Exposure mode –M (manual)
•Time-Bulb
• intervalometer – off
•Autofocus mode – AF – AFC or Manual
• Burst mode — off - Programming the timer
Press SET- the icon starts blinking on the display.Use the directional arrows to program the timer. Right/ Left for selection, up/ down to change.
The cursor shows the current position. Press SET to confirm.
Delay, exposure and interval settings.Connect the cable to the camera.
• Turn on the camera.
• Set the exposure mode, time, autofocus mode and more to ensure correct exposure.
• Press the shutter release button halfway. If the focus and exposure are correct, press the button the rest of the way down to take the picture. - Starting the program
Press TIMER START/ STOP. The timer will start and the icon on the display will start flashing.
• The display shows the time remaining until the next photo.
• While the camera shutter is open, the display shows the time remaining until the shutter is closed and the RELEASE icon blinks.
• The program will end automatically when the preset number of shots is reached. To stop at any time, press TIMER START/ STOP
To open the shutter in Bulb mode – press and slide to the HOLD position. Slide in the opposite direction to finish.
*The manufacturer reserves the right to change the information contained in this manual without prior notice.
WASTE MANAGEMENT
The crossed-out trashcan symbol means that waste electrical and electronic equipment, batteries and packaging’s must not be placed with other house hold waste. They must be handed over to a separate waste collection system.
WARRANTY
Newell products are covered by a 40-month manufacturer’s warranty.
Made in China, In China hergestellt, Echo eon China, Fabricator in Cinna, Fabliau~
eon Chine, Vyrobeno v Cine, yproduloowano w Chinch, Chenango s Krane
Documents / Resources
Newell Timer Remote Series Electronic Timer Remotes [pdf] Instruction Manual Timer Remote Series Electronic Timer Remotes, Timer Remote Series, Electronic Timer Remotes, Timer Remotes, Remotes |