C17C19, 690 2-in-1 Kit Limpieza Pc
C17C19, 690 2-in-1 Kit Limpieza Pc
Please read this instruction manual carefully before using the product, and keep it for future reference.
Dusting off/Blowing air: Select nozzle 1-6 components or brush nozzle according to the using scenario.
Vacuum: Select the nozzle or use it with the nozzle brush head according to the using scenario
About the component
Nozzle 1: For camera lens/jewelry/phone handset charging port and other items
Nozzle 2: For swimming ring/beach ball/yoga ball inflation; Air blowing on barbecue charcoal
Nozzle 3: For PVC swimming pools and inflatable beds, etc.
Nozzle 4: For blowing the dust off the computer host, keyboard, etc.
Brush nozzle 5: Clean up static or thick dust adhesions
Vac nozzle l: Vacuum the dust or debris
Vac nozzle 2: Use to vacuum dust, debris or hair
Silicone component: Pump air for storage bag/compression bag 9Used with nozzle 4)
Vac brush: Use to vacuum static or thick dust adhesions (Used with Vac nozzle 1) 
How to clean the Dust Cup?
- Take off the dust cup and pull crumbs, debris into the trash can.
- Take out the vacuum filter inside the dust cup and clean more dust.
PS: Please make sure the air duster stops working if you want to clean dust cup.
Specifications
| Power Supply | DC 5V |
| Input | 2A |
| Rated Power | 68W |
| Motor Rotate Speed | 43000-51000RMP |
| Charging Time | 4-4.5 H |
| Battery Working Time (Fully charged) | 20- 30Min |
| Working Temperature | 14°F-122°F(-10°C–50°C) |
| Storage Temperature | -2°F-140°F(-10°C-60°C) |
| Noise | <90dB |
| Material | ABS,PP |
| Cable Length | 31.5 IN |
| Weight | 690g |
| Product Dimensions | 160100* 65mm |
Operate Instruction
- Hold down the power button for 3 seconds to turn on the duster and set the speed to first gear.
- Press the power button again to change to second gear.
- Press the power button for the third time to switch to the third gear.
- Press power button the forth time, change to standby mode.If you do not do anything in standby mode for one minute, it will automatically turn off.
- Long press power button to turn it off when it is in turn on status.
How to Charge
- Insert the USB cable into the charging port of the air dust, and connect to a 5V/2A USB outlet, such as a USBchargermobile phone adapter, laptop, mobile power supply, etc., in order to shorten the charging time, the 5 V /2 A adapter is the best choice.
- When the device is charging, the indicator light flashes redand the indicator light is always green when it is fully charged.
Note:
- It is not recommended to use the product while charging , because it will not hold a charge while working.
- In case that the air duster stops working in a short time, please keep the battery in a fully charged condition.
Battery’s lifetime would be shortened if you keep it in a wet place.
Indicator Instruction:
- Red light blink when charging
- Green light long time on when full charged
- Green light when working
Tips: To shorten the charging time, please connect the cable with a 5V/2A USB outlet, like USB charger, cellphone adapter, etc., Some USB outlets might have insufficient output current, which will slow down the charging speed or even hinder the charging.
How to Use
Note:
When using the Pressurized air for air nozzle for air inflation, the air valve must be opened for rapid air inflation.
As shown below: 
Release the nozzle from the nozzle hole and put it to the air outlet.
Documents / Resources
 |
Plumero De Aire C17C19, 690 2-in-1 Kit Limpieza Pc [pdf] Instructions C17C19 690 2-in-1 Kit Limpieza Pc, C17C19 690, 2-in-1 Kit Limpieza Pc, Kit Limpieza Pc, Limpieza Pc |
