Jabra-logo

Jabra 9450-25 Pro 9450 Mono

Jabra-9450-25-Pro-9450-Mono-product

Specifications

  • Model: Jabra Pro 9450 Mono
  • Type: Monaural (single ear)
  • Compatibility: Works with most desk phones
  • Dial Tone Switch Settings:
    • A: Avaya and most other phones
    • B: Cisco, Avaya Callmaster 5 and 6
    • C: Kirk Delta
    • D: Tenovis
    • E: Innovaphone
    • F: Other phones
    • G: Toshiba (most models), Dealerboards (most models including IPC and BT)
  • Microphone Position: Adjustable
  • Microphone Volume Control: Yes
  • Noise Cancelling: Yes

Product Usage Instructions

Adjust Dial Tone Switch

  • Make sure the Dial Tone Switch on the base of the headset is set correctly for your desk phone.
  • Refer to the Jabra Compatibility Guide to find the correct setting for your specific phone model.

Position the Microphone

  • Position the microphone close to your mouth to maximize speech quality and noise cancelling capabilities.
  • If the microphone is adjustable, position it approximately 1 inch from your mouth.

Adjust Microphone Volume

  • The volume level of the headset microphone should match the audio level of your desk phone.
  • Use the Microphone Volume Control switch on the base to adjust the volume up or down as needed.

FAQ

Q: How do I ensure clear audio when using my Jabra Pro 9450 Mono headset with my desk phone?

A: To ensure clear audio, follow these steps:

  1. Adjust the Dial Tone Switch on the base to match your desk phone model.
  2. Position the microphone approximately 1 inch from your mouth.
  3. Use the Microphone Volume Control switch on the base to adjust the volume to match your desk phone’s audio level.

If you need more detailed instructions, refer to the Quick Start Guide or user manual for your Jabra device.

FAQ’S

How do I ensure clear audio when I use my headset with my desk phone?

Ensure the Dial Tone Switch, microphone position, and microphone volume are configured properly. Refer to the Quick Start Guide or user manual for your Jabra device for specific instructions on how to adjust these settings.

  1. Adjust the setting for Dial Tone Switch to match your phone. You can verify the correct settings for your desk phone by using the Jabra Compatibility Guide. The following settings for Dial Tone Switch* will work in most cases.
    • Switch A: Avaya and most other phones
    • Switch B: Cisco, Avaya Callmaster 5 and 6
    • Switch C: Kirk Delta
    • Switch D: Tenovis
    • Switch E: Innovaphone
    • Switch F: Other phones
    • Switch G: Toshiba (most models), Dealerboards (most models including IPC and BT)
      • Switch options may vary depending on the product.
  2. Make sure the microphone is positioned close to your mouth to maximize speech quality and the noise cancelling capabilities. If the microphone is long enough, position it approximately 1 inch from your mouth.
  3. The volume level of the headset microphone should approximately match the audio level of your desk phone. Use the Microphone Volume Control switch on the base to adjust the volume up or down as needed.

https://www.jabra.hk/supportpages/jabra-pro-9450/9450-25-507-102/faq/b3bbaeff-974d-4ed0-9ef1-395f26e3d040

Documents / Resources

Jabra 9450-25 Pro 9450 Mono [pdf] Instructions
9450-25 Pro 9450 Mono, 9450-25, Pro 9450 Mono, Mono

References

Leave a comment

Your email address will not be published. Required fields are marked *