AF Lighting 4950-1H Light Mini Chandelier
Product Information
Specifications:
- Item No: 4950-1H
- Power: 120V
- Maximum Wattage: 40W
- Plug Type: Polarized
Product Usage Instructions
Installation:
- Carefully unpack and lay out all the parts on a clear surface.
- Assemble the chandelier as follows:
- Hang part 2 onto the frame (1)
- Continue hanging subsequent parts until all parts are assembled
- For hardwire installation, consult a qualified electrician for wire connections to the junction box.
- For portable wire installation:
- Cut off the fixture copper ground wire
- Avoid installing on radiant heating ceilings
- Use hooks only to engage the chain, not the electrical wire
- For plaster or plasterboard ceilings:
- Drill a hole in the ceiling matching the toggle bolt assembly
- Insert flaps and bolt into the ceiling, securing with a hook
- Drape the chain accordingly
- For wood or acoustic board ceilings:
- Locate a wood beam on the ceiling
- Screw the assembly into the wood beam
- Drape the chain accordingly
- Hook the chandelier assembly to the chain by connecting the fixture loop and chain link with a lock link.
- Connect wires following safety guidelines and secure canopy against the ceiling.
- Install the bulb into the socket. (Bulb not included)
- Turn on power to complete the installation process.
Frequently Asked Questions (FAQ)
- Q: What should I do if the plug does not fit in the outlet?
A: If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to disable this safety feature. - Q: Can I use an extension cord with this fixture?
A: Never use with an extension cord unless the plug can be fully inserted into the outlet.
Installation Instruction
Item No: 4950-1H
WARNING: To avoid risk of electrical shock, be sure to shut off power while installing or servicing this fixture.
- Carefully unpack and lay out all the parts on a clear surface.
- Assemble the Chandelier as below.
- Hang the parts (2) onto the frame (1)
- Hang the parts (3) onto the parts (2)
- Hang the parts (4) onto the parts (3)
- Hang the parts (5) onto the parts (4)
- Hang the parts (6) onto the parts (5)
- Hand the parts (7) onto the parts (6)
There are 2 ways to install this chandelier:
- Portable Wire – STEP 3
- Hardwire – STEP 4
PORTABLE WIRE INSTALLATION
- NOTE: Cute off the fixture copper ground wire
- CAUTION: DO NOT install on a radiant heating ceiling
- CAUTION: The hooks are to engage the chain only and not the electrical wire.
FOR PLASTER OR PLASTER BOARD CEILINGS
- Drill a hole in the ceiling to the same diameter as the closed flaps of the included toggle bolt assembly (A).
- Insert flaps and bolt into the ceiling with the toggle bolt protruding through the ceiling, lock the assembly by threading on the hook as shown.
- Drape your chain to the second hook or let it hang straight.
FOR WOOD OR ACOUSTIC BOARD CEILINGS – MINIMUM THICKNESS IS 1-1/2 INCH
- Select a place on the ceiling where a wood beam exists.
- Thread the steel screw (B) into hook (C).
- Screw the assembly into the wood beam.
- Drape your chain to second hook or let it hang straight.
HOOK THE CHANDELIER ASSEMBLY TO THE CHAIN
- Open the lock link (K1) provided, connect to the fixture loop (J) and chain link and close the lock link (K1).
- One chain and wire are arranged, plug the wire plug into household electrical outlet.
IMPORTANT SAFETY INFORMATION:
This portable fixture has a polarized plug (one blade is wider than the other.) As a safety feature, this plug will fit a polarized outlet only one way. If the plug does not fit fully in the outlet reverse the plug. If it still does not fit contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to disable this safety feature. - FIXED WIRE INSTALLATION
NOTE: IT IS ADVISED TO CONTACT A QUALIFIED ELECTRICIAN FOR THIS STEP.- Thread nipple (C) into loop (F) until snug.
- Thread other end of nipple (C) with loop attached into crossbar (D) until snug.
- Place lock washer (B) over end of nipple protruding through crossbar and thread the thread hex nut (A) onto nipple until tight
- Take this crossbar assembly and mount to ceiling junction box with junction box threads (E), tighten thread securely with screwdriver.
- Open the lock link (K1) provided, connect to the fixture loop (J) and chain link and close the lock link (K1).
- Lace the fixture wires through the chain. Slip loop collar (H) over the chain. Then do the same with the canopy (G).
- Open the end link (K) of the chain and hand the fixture on the loop (F) and close the link (K).
- Cut the wire plug off, feed the fixture wires through the loop (F) and nipple (C) and pull until taut.
- Connect fixture wire to the wire from the junction box with wire connectors as below.
WIRE CONNECTION:- Connect smooth wire to the black house wire with wire connectors.
- Ribbed wire to the white house wire with wire connectors.
- Fixture ground wire to the supply ground wire with wire connectors or the fixture ground wire from the fixture to the green ground screw on the mounting bracket.
- Push canopy (G) up against ceiling and secure with loop collar (H).
- Install the bulb into the socket. BULB(S) NOT INCLUDED
- Installation is now complete. Turn on power.
Note: 120V/40W
Documents / Resources
AF Lighting 4950-1H Light Mini Chandelier [pdf] Instruction Manual 4950-1H Light Mini Chandelier, 4950-1H, Light Mini Chandelier, Mini Chandelier, Chandelier |