ECHO-LOGO

ECHO PPT-266 Power Pruner

ECHO-PPT-266-Power-Pruner-PRODUCT

Power PrunerTM

Specifications

  • Model: PPT-266, PPT-266H, PPT-266S

Product Information

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operations tips and SAFETY messages.

Product Usage Instructions

Assembly
Before using the Power PrunerTM, it is important to properly assemble it. Follow these steps

  1. Refer to the Assembly section in the Operator’s Manual for detailed instructions.
  2. Ensure all components are included in the package.
  3. Attach the guide bar and saw chain according to the instructions provided.
  4. Lubricate the Power PrunerTM as directed in the Lubrication section.

Lubrication
To ensure smooth operation and longevity of the Power PrunerTM, regular lubrication is necessary. Follow these steps

  1. Refer to the Lubrication section in the Operator’s Manual for detailed instructions.
  2. Use the recommended lubricant specified in the manual.
  3. Apply lubricant to the designated areas as instructed.

Guide Bar and Saw Chain Replacement
If the guide bar or saw chain of the Power PrunerTM needs to be replaced, follow these steps

  1. Refer to the Guide Bar and Saw Chain Replacement section in the Operator’s Manual for detailed instructions.
  2. Ensure the Power PrunerTM is turned off and disconnected from the power source.
  3. Remove the old guide bar and saw chain carefully.
  4. Install the new guide bar and saw chain according to the instructions provided.

Filing Saw Chain
To maintain the sharpness of the saw chain, regular filing is required. Follow these steps

  1. Refer to the Filing Saw Chain section in the Operator’s Manual for detailed instructions.
  2. Use a suitable file and file guide to sharpen the saw chain.
  3. Follow the recommended filing angles and depths specified in the manual.

FAQ

  • Q: Where can I find additional or replacement manuals?
    A: Additional or replacement manuals can be obtained from ECHO Consumer Product Support. Refer to the Servicing Information section in the Operator’s Manual for contact details.
  • Q: What should I do if I encounter any issues with the Power PrunerTM?
    A: If you experience any problems or have any questions regarding the Power PrunerTM, refer to the Troubleshooting section in the Operator’s Manual for solutions. If the issue persists, contact ECHO Consumer Product Support for further assistance.

Q: How should I store the Power PrunerTM?
A: To ensure proper storage and prevent damage, follow these guidelines

  1. Clean and remove any debris from the Power PrunerTM.
  2. Store it in a dry and secure location.
  3. Protect it from extreme temperatures and humidity.
  4. Keep it out of reach of children and unauthorized users.

Q: What is the warranty coverage for the Power PrunerTM?
A: Warranty information can be found in the Warranty Statements section of the Operator’s Manual. Make sure to fill out and submit the Warranty Card to activate your warranty.

  • WARNING ” DANGER
    The muffler or catalytic muffler 36315135h1 and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal injury may occur.
  • WARNING
    The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
  • WARNING
    Users of this equipment risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. ECHO provides an operator’s manual and a safety manual. Both must be read and understood for proper and safe operation. Failure to do so could result in serious injury.

INTRODUCTION

Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job-dependability. Read and understand this manual and the SAFETY MANUAL. You will find both easy to use and full of helpful operations tips and SAFETY messages.

THE OPERATOR’S MANUAL
Keep it in a safe place for future reference. Contains specifications and information for safety, operation, maintenance, storage, and assembly specific to this product.

THE SAFETY MANUAL
Keep it in a safe place for future reference. Explains possible hazards and the measures you should take to insure safe operation.

ECHO-PPT-266-Power-Pruner- (1)

POWER PRUNERTM OPERATOR’S MANUAL

SAFETY

MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre-ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.

  • DANGER
    The safety alert symbol accompanied by the word “DANGER” calls attention to an act or condition which WILL lead to serious personal injury or death if not avoided.
  • WARNING
    The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condi-tion which CAN lead to serious personal injury or death if not avoided.
  • CAUTION
    The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.

CIRCLE AND SLASH SYMBOL
This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury.

NOTE
This enclosed message provides tips for use, care and maintenance of the unit.

IMPORTANT
The enclosed message provides information necessary for the protection of the unit.

INTERNATIONAL SYMBOLS

ECHO-PPT-266-Power-Pruner- (2)

PERSONAL CONDITION AND SAFETY EQUIPMENT

WARNING
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit.

Physical Condition
Your judgment and physical dexterity may not be good:

  • if you are tired or sick,
  • if you are taking medication,
  • if you have taken alcohol or drugs.

Operate unit only if you are physically and mentally well.

Eye Protection
Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the unit

Face and Head Protection
When trimming overhead, always wear head protection meeting ANSI Z89.1 or CE requirements with a full face shield. Head protection with full face shield will help protect you from falling branches and debris.

Hand Protection
Wear no-slip, heavy duty work gloves to improve your grip on the unit handles. Gloves also reduce the transmis-sion of machine vibration to your hands.

Hearing Protection
ECHO recommends wearing hearing protection when-ever unit is used.

Proper Clothing
Wear snug fitting, durable clothing

  • Pants should have long legs, shirts with long sleeves.
  • DO NOT WEAR SHORTS,
  • DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entangled in moving parts or surrounding growth.

Wear sturdy work shoes with nonskid soles;

  • DO NOT WEAR OPEN TOED SHOES,
  • DO NOT OPERATE UNIT BAREFOOTED.
  • Wear no-slip, heavy duty work gloves.
  • Keep long hair away from engine and air intake. Retain hair with cap or net.

Hot Humid Weather
Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler.

WARNING
The ignition components of this machine generate an electromagnetic field during operation which may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their physician and the pacemaker manufacturer before operating this machine. In the absence of such informa-tion, ECHO does not recommend the use of ECHO products by anyone who has a pacemaker.

Vibration and Cold
It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sen-sations followed by loss of color and numbness in the fingers. The following precautions are strongly recommended because the minimum exposure which might trigger the ailment is unknown.

  • Keep your body warm, especially the head, neck, feet, ankles, hands and wrists.
  • Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks and also by not smoking.
  • Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required.
  • If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration. ECHO-PPT-266-Power-Pruner- (3)

Repetitive Stress Injuries
It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.

ECHO-PPT-266-Power-Pruner- (4)

To reduce the risk of RSI/CTS, do the following

  • Avoid using your wrist in a bent, extended or twisted position. In-stead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.
  • Take periodic breaks to minimize repetition and rest your hands.
  • Reduce the speed and force with which you do the repetitive movement.
  • Do exercises to strengthen the hand and arm muscles.
  • Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness or pain in the fingers, hands, wrists or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.

DANGER
All over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly when pruning, otherwise serious injury or death may result.

WARNING
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

  • Read the Manuals
    Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.
  • Clear the Work Area
    Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
  • Use Proper Clothing & Equipment
    Always wear head protection with full face shield to help protect against falling branches and debris.
  • Keep A Firm Grip
    Grip Power PrunerTM with both hands with thumbs and fingers encir-cling the handle, and shaft tube.

ECHO-PPT-266-Power-Pruner- (5)

Keep A Solid Stance

  • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not overreach.
  • Operate the Power PrunerTM only from the ground or out of an ap-proved bucket lift.
  • Always evaluate the branches to be pruned for hazards such as loose dead branches which may fall and strike the operator or helpers. Remove hazards before pruning.
  • Plan retreat path from falling objects.
  • Cut branches bounce when striking ground.
  • Check that shoulder harness is adjusted for safe, comfortable operation. See picture at right for proper adjustment.
  • Turn the Power PrunerTM off when moving from tree to tree.
  • Avoid any contact with saw chain.

ECHO-PPT-266-Power-Pruner- (6)Avoid Hot Surfaces
Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.

ECHO-PPT-266-Power-Pruner- (7)

KICKBACK

WARNING
Kickback can lead to dangerous loss of control of the Power PrunerTM and result in serious injury to the operator or any one standing close by. Hold the Power PrunerTM firmly with both hands with thumbs and fingers encircling the front and rear handles. Be aware of the down and outward path the pruner will take after the cut is made.

  • Kickback may occur when the moving saw chain at the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. In some cases this may cause a lightning-fast reverse action,
  • kicking the guide bar and saw chain up and back or down and back towards the operator. Either of these reactions may cause the operator to lose control of the Power PrunerTM which could result in serious personal injury.
  • With a basic understanding of kickback, you can reduce or eliminate the element of surprise which contributes to accidents.
  • Avoid contact of the guide bar tip with any object while the saw chain is moving.
  • Cut only wood. Avoid striking concrete, metal, wire, or other obstruc-tions which could cause kickback or damage to the saw chain.
  • If the saw chain does strike a foreign object, immediately stop the en-gine, inspect and repair the Power PrunerTM if necessary.

ECHO-PPT-266-Power-Pruner- (8)

EQUIPMENT

WARNING
Serious injury may result from the use of non approved guide bar and saw chain combinations. ECHO, INC. will not be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for use with this unit. Read and comply with all safety instructions listed in this manual.

Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

Guide Bar and Saw Chain

  • Check that the cutting attachment, guide bar, and saw chain is firmly attached and in safe operating condition.
  • Use only one Echo-approved extension on the pruner.
  • Do not hit rocks, stones, tree stumps, and other foreign objects with the saw chain.
  • Do not cut into the ground with the saw chain.
  • If cutting attachment end strikes an obstruction, stop engine immediately and inspect saw chain for damage.
  • Do not operate with a dull, fractured, or discolored saw chain.
  • Remove all foreign objects from work area.
  • Always cover the guide bar and saw chain with guide bar cover during transportation and for storage.

WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.

  • ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
  • DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
  • NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

WARNING
Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are found, do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an autho-rized servicing dealer before using.

EMISSION CONTROL (EXHAUST & EVAPORATIVE)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system is EM and TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emis-sions). Evaporative emissions for California models are only applicable to fuel tanks.

  • ECHO-An Emission Control Label is located on the engine.
  • (This is an EXAMPLE ONLY, information on label varies by engine FAMILY). ECHO-PPT-266-Power-Pruner- (10)

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are fol-lowed as listed in the Maintenance Section of this manual.

DESCRIPTION
Locate this safety decal on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.

ECHO-PPT-266-Power-Pruner- (11)

ECHO-PPT-266-Power-Pruner- (12) ECHO-PPT-266-Power-Pruner- (13)

  1. POWER HEAD – Includes the Engine, Clutch, Fuel System, Ignition System and Starter.
  2. THROTTLE TRIGGER – Spring loaded to return to idle when released. During acceleration press trigger gradually for best operating technique.
  3. SHOULDER HARNESS – An adjustable strap that suspends the unit from the operator.
  4. CUTTING ATTACHMENT – Sealed, gear ratio is 1.5:1 reduction.
  5. CUTTING SHOE – Used to capture and stabilize branch while cutting. Place cutting shoe against branch, accelerate and lower saw chain into branch.
  6. GUIDE BAR – 305 mm (12 in.) guide bar.
  7. SAW CHAIN – Chain, serving as a cutting tool.
  8. AUTOMATIC OILER ASSEMBLY – Self oiling. Use high quality, low viscosity, non detergent bar and chain oil.
  9. LOWER SHAFT TUBE – Durable fiberglass mesh housing.
  10. STOP SWITCH – Mounted on top of handle assembly. Move switch forward to run, back to stop.
  11. THROTTLE TRIGGER LOCKOUT – This lever must be depressed before throttle trigger can be operated.
  12. REAR HANDLE ASSEMBLY – Sturdy handle for right hand placement. Includes stop switch and throttle trigger.
  13. TOP GUARD – Protects arm from hot engine.
  14. RECOIL STARTER – Pull recoil handle slowly until starter engages, then quickly and firmly. When engine starts return handle slowly. DO NOT let handle snap back or damage will occur.
  15. SPARK ARRESTOR – CATALYTIC MUFFLER / MUFFLER -The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.
  16. FUEL TANK – Contains fuel and fuel filter.
  17. FUEL TANK CAP – Covers and seals fuel tank opening.
  18. CHOKE – Located above air cleaner housing. Move lever to starting position ( ECHO-PPT-266-Power-Pruner- (14)) (close choke) and back to run position (ECHO-PPT-266-Power-Pruner- (15) ) (open choke).
  19. AIR CLEANER ASSEMBLY – Contains replaceable air filter elements.
  20. PURGE BULB – Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times.
  21. SPARK PLUG – Provides spark to ignite fuel mixture.
  22. GUIDE BAR COVER – Used to cover guide bar and saw chain during transport and storage. Remove guide bar cover before using unit.

CONTENTS
Due to packaging restriction the ECHO product you have purchased requires some assembly.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

  • Power Head
  • Handle Shaft Assembly (PPT-266, PPT-266H Only) ___ Drive Shaft Assembly
  • Cutting Attachment W/ Guide Bar and Saw Chain ___ Operator’s Manual
  • Emission Control Warranty Statement
  • Safety Manual
  • Warranty Registration Card
  • Assembly Tool (s)
  • Safety Glasses
  • Shoulder Harness
  • Guide Bar Cover

ECHO-PPT-266-Power-Pruner- (16)

ASSEMBLY

  • Parts Required: Power Head, Handle Shaft Assembly, Drive Shaft
  • Assembly, Cutting Attachment
  • HANDLE SHAFT / DRIVE SHAFT
  • (PPT-266, PPT-266H Models Only)
  1. Remove protective caps from handle shaft assembly.
  2. Loosen clamping bolts (A) on drive shaft.ECHO-PPT-266-Power-Pruner- (17)
  3. Pull flexible drive shaft coupler (B) 2 -3 inches out of handle shaft.ECHO-PPT-266-Power-Pruner- (18)
  4. Align flexible drive shaft coupler with drive shaft socket and slide together until handle shaft is fully seated into drive shaft.
  5. Tighten clamping bolts (A).

HANDLE SHAFT / POWER HEAD

  1. Loosen two (2) clamping screws (A) and remove locating screw (B).ECHO-PPT-266-Power-Pruner- (19)
  2. Pull flexible drive shaft coupler (C) 2-3 in. out of handle shaft assembly.
    ECHO-PPT-266-Power-Pruner- (20)
  3. Align flexible drive shaft coupler with engine socket and slide together until locating hole in shaft is visible through locating hole in engine housing.
  4. Install locating screw (B) and tighten clamping bolts (A). ECHO-PPT-266-Power-Pruner- (21)

THROTTLE LINKAGE AND IGNITION LEADS

  1. Install throttle linkage cable into fan cover clip (A). ECHO-PPT-266-Power-Pruner- (22)
  2. Close choke and remove air filter cover.
  3. Place throttle linkage (B) through adjustment fixture (C) and install wire end into large carburetor throttle swivel hole (D). Check throttle for freedom of movement and that wide open throttle / low idle extremes are adjusted properly. The throttle linkage must be adjusted by moving the adjustment fixture (C). Consult with your Echo Dealer for correct adjustment procedure.ECHO-PPT-266-Power-Pruner- (23)
  4. Connect 2 ignition stop leads (E, F) from throttle cable tubing to 2 ignition leads (E, F) on engine.ECHO-PPT-266-Power-Pruner- (24) CAUTION
    Assure ignition terminals are completely covered by clear plastic sleeves. ECHO-PPT-266-Power-Pruner- (25)
  5. Secure ignition leads against engine housing with clip (G).
  6. Install air filter and cover.

CUTTING ATTACHMENT TO DRIVE SHAFT INSTALLATION

WARNING
Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result.

  1. Loosen the two (2) screws (C) and locator screw (D) on cutting attachment.ECHO-PPT-266-Power-Pruner- (26)
  2. Loosen clamp knob (E) turning counter clockwise.ECHO-PPT-266-Power-Pruner- (27)
  3. Pull upper tube (F) out of fiberglass lower tube 127-152 mm (5-6 in.), then slide (F) back into fiberglass lower tube exposing inner drive shaft (G). Align and join star shaped drive end of inner drive shaft (G) with cutting attachment shaft (H).ECHO-PPT-266-Power-Pruner- (28)
  4. Align ridges (J) on upper tube with seams in cutting attachment.
  5. Slide together aligning locator screw (D) in cutting attachment with locating hole (I) in upper tube.
  6. Tighten locator screw (D). Tighten two (2) cutting attachment screws (C).
  7. Extend upper tube to desired length. Tighten clamp knob (E) turn-ing clockwise.ECHO-PPT-266-Power-Pruner- (29)

SAW CHAIN TENSION ADJUSTMENT

WARNING
Always disconnect spark plug wire before servicing cutting attach-ment. Wear gloves when handling saw chain, otherwise serious personal injury may result.

To Adjust Saw Chain Tension

  1. Move stop switch to STOP position.
  2. Disconnect spark plug lead.
  3. Loosen two guide bar nuts (A) until finger tight. ECHO-PPT-266-Power-Pruner- (30)IMPORTANT
    Always loosen guide bar nuts before turning the chain tension ad-juster, otherwise the clutch cover and tensioner will be damaged.
  4. Hold the bar nose up, and turn the adjuster screw (B) clockwise un-til the chain fits snugly against the underside of the bar, as shown. Cold Chain Only – turn adjuster screw CW an additional 1/8 – 1/4 turn.
  5. Tighten both guide bar nuts with nose held up. Tighten rear nut first.
  6. Pull the chain around the guide bar by hand. Reduce the chain ten-sion if you feel tight spots.
  7. When chain is properly tensioned, tighten guide bar nuts securely. ECHO-PPT-266-Power-Pruner- (30)IMPORTANT
    Tighten guide bar nuts to 8 – 9 Nm (71 – 80 in. lbs.) DO NOT over-tighten nuts. Damage may result.
  8. Keep chain properly tensioned at all times.
    NOTE
    All chains require frequent adjustment.
  9. Connect spark plug lead.

OPERATION

  • WARNING
    Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
  • WARNING
    Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to prevent discharge of hot particles from the engine. Metal blade use also can create sparks if the blade strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention require-ments.

FUEL

NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

WARNING
Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engine components.

Fuel Requirements

  • Gasoline – Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (wood alcohol) is NOT approved.
  • Two Stroke Oil – A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be used. Echo brand premium Power Blend X TM Universal 2-Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an (ISO/CD 13738) and J.A.S.O. FD certified oil, such as Echo premium Power Blend X TM, will void the two-stroke engine warranty.

IMPORTANT
Echo premium Power Blend X TM Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past regardless of ratio specified in those manuals.

Handling Fuel

DANGER
Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result.

  • Use an approved fuel container.
  • DO NOT smoke near fuel.
  • DO NOT allow flames or sparks near fuel.
  • Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize.
  • NEVER refuel a unit when the engine is HOT or RUNNING!
  • DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground.
  • DO NOT overfill fuel tank. Wipe up spills immediately.
  • Securely tighten fuel tank cap and close fuel container after refueling.
  • Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired.
  • Move at least 3m (10 ft.) from refueling location before starting the engine.

Mixing Instructions

  1. Fill an approved fuel container with half of the required amount of gasoline.
  2. Add the proper amount of 2-stroke oil to gasoline.
  3. Close container and shake to mix oil with gasoline.
  4. Add remaining gasoline, close fuel container, and remix.
    ECHO-PPT-266-Power-Pruner- (32)

IMPORTANT
Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage.

After use
DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage – Fuel storage laws vary by locality. Contact your local govern-ment for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames.

IMPORTANT
Stored fuel ages. Do not mix more fuel than you expect to use in thirty (30) days, ninety (90) days when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALWAYS shake fuel con-tainer thoroughly before each use.

LUBRICATING THE GUIDE BAR AND SAW CHAIN Automatic Oiling System

  1. Wipe debris from around oil fill cap.
  2. Remove oil fill cap and fill reservoir with a quality, low viscosity guide bar and saw chain oil. ECHO-PPT-266-Power-Pruner- (33)

NOTE
The discharge volume of the automatic oiler is preset to deliver 3 to 4 cc/min. at normal operating RPM. During heavy or dry cutting conditions the oil discharge volume may be adjusted to assure ad-equate lubrication. Refill the oil reservoir with each tank of fuel.

IMPORTANT
To prevent plastic deterioration, do not use synthetic or silicone based oil.

ADJUSTING AUTOMATIC OILER

  1. From bottom of gear case, turn adjustment screw (A) clockwise to decrease oil volume – counter clockwise to increase oil volume.ECHO-PPT-266-Power-Pruner- (34)

NOTE
Very little visible oil on the saw chain will provide sufficient lubri-cation.

STARTING COLD ENGINE

WARNING
The attachment will operate immediately when the engine starts, and could result in possible serious injury. Keep movable parts of the attachment away from objects that could become entangled or thrown, and surfaces that could cause loss of control.

  1. Stop Switch
    Move stop switch button (A) forward away from the STOP position.ECHO-PPT-266-Power-Pruner- (35)
  2. Choke
    Move choke (B) to “Cold Start” ( ECHO-PPT-266-Power-Pruner- (14)) Position.
    ECHO-PPT-266-Power-Pruner- (35)
  3. Purge Bulb
    Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.
  4. Recoil Starter
    Lay the unit on a flat, area and keep movable attachment parts clear of all obstacles. Firmly grasp right hand grip and throttle trigger lockout with left hand and fully depress throttle trigger to wide open position. Rapidly pull recoil starter handle/rope (D) until engine fires (or maximum five [5] pulls).ECHO-PPT-266-Power-Pruner- (37)
  5. Choke
    After engine fires (or five [5] pulls), move choke lever back to “Run” ( ECHO-PPT-266-Power-Pruner- (15)) position. Hold throttle trigger and throttle trigger lockout fully depressed and pull recoil starter handle/rope until engine starts and runs. Release throttle trigger and allow unit to warm up at idle for several minutes.
    NOTE
    If engine does not start with choke in “Run” position after 5 pulls, repeat instructions 2 – 5.
  6. ECHO-PPT-266-Power-Pruner- (38)After engine warms up, gradually depress throttle trigger to in- crease engine RPM to operating speed.ECHO-PPT-266-Power-Pruner- (39)

STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.

WARNING
The attachment should not move at idle, otherwise serious personal injury may result.

ECHO-PPT-266-Power-Pruner- (40)NOTE
If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.

  1. Stop Switch.
    Move Stop Switch button (A) forward away from the STOP posi-tion.
  2. Purge Bulb
    Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times. ECHO-PPT-266-Power-Pruner- (41)
  3. Recoil Starter.
    Lay the unit on a flat, clear area and firmly grasp right hand grip with left hand. Do not depress throttle trigger. Pull the recoil starter handle (D) until the engine fires.

ECHO-PPT-266-Power-Pruner- (42)

NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.

STOPPING ENGINE

  1. Throttle.
    Release throttle trigger, and allow engine to return to idle before stopping engine.
  2. Stop Switch.
    Move stop switch button (A) backward to STOP position.ECHO-PPT-266-Power-Pruner- (43)

WARNING
If engine does not stop when stop switch is moved to STOP position, close choke – COLD START position – to stall engine. Have your ECHO dealer repair stop switch before using pruner again.

PRUNING TECHNIQUES

WARNING
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious in-jury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.
ECHO-PPT-266-Power-Pruner- (44)The Power PrunerTM is designed for light to medium trimming of limbs and branches up to 203 mm (8 in.) in diameter. Follow these tips for successful operation.

  • Plan cut carefully. Check direction branch will fall.
  • Plan retreat path from falling branch. Cut branches bounce when striking ground.
  • Long branches should be removed in several pieces.
  • Do not stand directly beneath branch being cut. ECHO-PPT-266-Power-Pruner- (45)

When ready to cut

  • Hold “cutting shoe” against branch. This will prevent whipping of the branch. DO NOT use back and forth sawing action.
  • Look out for branch immediately behind the branch being cut. If saw chain hits rear branch damage to saw chain may occur.
  • ECHO-PPT-266-Power-Pruner- (46)Accelerate to full throttle.
  • Apply cutting pressure.
  • Ease cutting pressure when nearing end of cut to maintain control.

When pruning a limb 102 mm (4 in.) diameter or larger cut as follows

  1. Under cut 1/4 limb diameter near tree trunk.
  2. Finish top cut slightly farther out on limb.
  3. Flush cut stub at trunk.
  4. DO NOT use for felling or bucking.

MAINTENANCE

WARNING

  • Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
  • Your ECHO Power PrunerTM is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your pruner achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOUR-SELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your ECHO Dealer for repairs.

SKILL LEVEL

  • Level 1 = Easy to do. Common tools may be required.
  • Level 2 = Moderate difficulty. Some specialized tools may be required.

ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier.

MAINTENANCE INTERVALS

ECHO-PPT-266-Power-Pruner- (47)MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN IMPORTANT NOTE – Time intervals shown are maximum. Actual use and your experience will determine the frequency of required maintenance.

MAINTENANCE PROCEDURE NOTES

  1. Apply grease every 25 hours of use.
  2. Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity.

* All recommendations to replace are based on the finding of damage or wear during inspection.

AIR FILTER

  1. Level 1. Parts required: REPOWERTM AIR & FUEL FILTER KIT.

ECHO-PPT-266-Power-Pruner- (48)

  1. Close choke (cold start position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumu-lated dirt from air cleaner area.
  2. Remove air filter cover and air filter retainer from inside cover. Brush dirt from inside cover.
  3. Replace filter if it is damaged, very dirty, or the rubber sealing edges are deformed.
  4. Remove foam pre-filter and air filter and clean as indicated below:
    Foam Pre-filter
    • Clean foam filter in water/detergent solution and rinse with clean water.
    • Wrap the filter in a clean, dry cloth and squeeze (do not wring) dry. Allow to dry completely before reuse. Do not oil.ECHO-PPT-266-Power-Pruner- (49)Dual Layer Air Filter
    • Lightly brush debris from filter.
    • Soak heavily soiled filters in water/detergent solution to loosen dirt, then brush lightly.
    • Rinse with clean water and allow to dry completely before reuse.
  5. Place foam pre-filter over raised center and inside outer lip of air filter. Install air filter in air filter case.
  6. Install air filter retainer on post in air filter cover, flat side up.
  7. Install air filter cover and tighten cover knob securely.

FUEL FILTER

Level 1.
Parts required: REPOWERTM AIR & FUEL FILTER KIT.

DANGER
Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result.

ECHO-PPT-266-Power-Pruner- 01

  1. Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.
  2. Use the “fuel line hook” to pull the fuel line and filter from the tank.
  3. Remove the filter from the line and install the new filter.

NOTE
Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel supply hose between the carburetor and fuel tank. When servicing model year 2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part.

SPARK PLUG

Level 2.
Parts Required: REPOWERTM Tune-Up Kit

IMPORTANT
Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) oth-erwise severe engine damage may occur.

ECHO-PPT-266-Power-Pruner- (50)

  1. Remove spark plug and check for fouling, worn and rounded center electrode.
  2. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage engine.
  3. Adjust spark plug gap 0.65mm (0.026 in.) by bending outer elec-trode.
  4. Tighten spark plug to 150-170 kgf  cm (130-150 in  lbf).

COOLING SYSTEM CLEANING

Level 2.
Parts Required: None.

IMPORTANT
To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine.

Overheating and engine seizure can occur whenECHO-PPT-266-Power-Pruner- (51)

  • Air intakes are blocked, preventing cooling air from reaching the cylinder.
  • Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the heat from leaving.

Removal of cooling passage blockages or cleaning of cooling fins is considered “Normal Maintenance.” Any failure attributed to lack of maintenance is not warranted.

  1. Remove spark plug lead.
  2. Remove air cleaner cover.
  3. Remove muffler cover (A).
  4. Remove engine cover (B). ECHO-PPT-266-Power-Pruner- (52)IMPORTANT
    DO NOT use a metal scraper to remove dirt from the cylinder fins.
  5. Use brush to remove dirt from the cylinder fins.
  6. Remove grass and leaves from the grid between the recoil starter and fuel tank.
  7. Assemble components in reverse order. ECHO-PPT-266-Power-Pruner- (53)

EXHAUST SYSTEM
Spark Arrestor Screen

Level 2.
Parts Required: Spark Arrestor Screen, Gasket

  1. Remove muffler cover (A).
  2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering cylinder.
  3. Remove spark arrestor screen (B), gasket (C) and exhaust guide
    (D) from muffler body.
  4. Clean carbon deposits from muffler components.ECHO-PPT-266-Power-Pruner- (55)NOTE
    When cleaning carbon deposit, be careful not to damage the cata-lytic element inside muffler.
  5. Replace screen if it is cracked, plugged or has holes burned through.
  6. Assemble components in reverse order.

Exhaust Port Cleaning

Level 2.
Parts Required: As needed: Heat Shield

  1. Remove spark plug lead from spark plug, and remove muffler cover.
  2. Place piston at top dead center. Remove muffler (A) and heat shield (B).
  3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port. ECHO-PPT-266-Power-Pruner- (56)IMPORTANT
    Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.
  4. Inspect heat shield, and replace if damaged.
  5. Install heat shield and muffler.
  6. Tighten muffler mounting bolts (or nuts) to 60-70 in•lbf (70-80 kgfcm).
  7. Install muffler cover and attach spark plug lead.
  8. Start engine, and warm to operating temperature.
  9. Stop engine, and re-tighten mounting bolts (or nuts) to specifica-tions. ECHO-PPT-266-Power-Pruner- (57)

 

CARBURETOR ADJUSTMENT

Engine Break-In
New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required.

High Altitude Operation
This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

IMPORT ANT
If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.

Level 2.
Parts required: None.

NOTE
Every unit is run at the factory and the carburetor is set in compliance with emission regulations. Carburetor adjustments, other than idle speed, must be performed by an authorized ECHO dealer.

  1. Check idle speed and reset if necessary. If a tachometer is avail- able, idle speed screw (A) should be set to the specifications found on “Specifications” page of this manual. Turn idle screw (A) clockwise to increase idle speed; counter clockwise to decrease idle speed.
    ECHO-PPT-266-Power-Pruner- (58)

WARNING
When carburetor adjustment is completed, the cutting attachment should not turn at idle, otherwise serious personal injury may result.

LUBRICATION
Flexible Drive Shaft

Level 1.
Parts required: POWER BLENDXTM 14 oz. or Lithium Based Grease.

  1. Loosen clamping screws (A) on driveshaft coupling.ECHO-PPT-266-Power-Pruner- (59)
  2. Remove handle and flexible drive shaft.
  3. Remove flexible drive shaft (B).ECHO-PPT-266-Power-Pruner- (60)ECHO-PPT-266-Power-Pruner- (61)
  4. Wipe flex shaft clean and apply a thin coating of grease.
  5. Slide flex shaft into handle. Leave 2 – 3 inches of flex shaft ex-posed. DO NOT get dirt on flex shaft.
  6. Align flexible drive shaft with drive shaft socket, and slide together until handle is fully seated into drive shaft coupling.
  7. Tighten clamping screws (A).

GUIDE BAR AND SAW CHAIN REPLACEMENT

WARNING
Never try to replace or adjust guide bar and saw chain with engine running. Always disconnect spark plug wire before servicing guide bar and saw chain. This saw chain is VERY sharp, wear heavy gloves to protect your hands when handling it. Wear eye protection meeting CE or ANSI specification Z87.1.

Guide Bar Replacement / Installation

Level 2

  1. Remove two (2) guide bar nuts (A), and unscrew sprocket cover screw (B).ECHO-PPT-266-Power-Pruner- (62)
  2. Remove sprocket cover (D).
  3. Remove guide bar and saw chain from gear case and sprocket.
  4. Remove chain from guide bar and check guide bar for damage and excessive or uneven wear. Replace guide bar if necessary.
  5. Install chain on guide bar with cutters on top of bar facing toward bar tip.
  6. Install guide bar and chain on gear case, engaging chain with drive sprocket (E).ECHO-PPT-266-Power-Pruner- (63)
  7. Turn tension adjustment screw (C) to ensure chain tension adjuster pin fits into the guide bar adjuster hole.
  8. Install sprocket cover (D), tighten guide bar nuts (A) finger tight, and fasten sprocket cover screw (B).
  9. Adjust chain tension.ECHO-PPT-266-Power-Pruner- (64)

Sprocket Cover Cleaning

  1. Remove two (2) guide bar nuts (A), and unscrew sprocket cover screw (B).
  2. Remove sprocket cover (D).
  3. Gently brush debris from inside guide bar cover and from around sprocket.
  4. Turn tension adjustment screw (C) to ensure chain tension adjuster pin fits into the guide bar adjuster hole.
  5. Install sprocket cover (D), tighten guide bar nuts (A) finger tight, and fasten sprocket cover screw (B).
  6. Adjust chain tension.

ECHO-PPT-266-Power-Pruner- (65)To Adjust Saw Chain Tension

WARNING
Always disconnect spark plug wire before servicing cutting attach-ment. Wear gloves when handling saw chain, otherwise serious personal injury may result.

To Adjust Saw Chain Tension

  1. Move stop switch to STOP position.
  2. Disconnect spark plug lead.
  3. Loosen two guide bar nuts (A) until finger tight. ECHO-PPT-266-Power-Pruner- (66)IMPORTANT
    Always loosen guide bar nuts before turning the chain tension ad-juster, otherwise the clutch cover and tensioner will be damaged.
  4. Hold the bar nose up, and turn the adjuster screw (B) clockwise un-til the chain fits snugly against the underside of the bar, as shown. Cold Chain Only – turn adjuster screw CW an additional 1/8 – 1/4 turn.
  5. Tighten both guide bar nuts with nose held up. Tighten rear nut first.
  6. Pull the chain around the guide bar by hand. Reduce the chain tension if you feel tight spots.
  7. When chain is properly tensioned, tighten guide bar nuts securely.
    IMPORTANT
    Tighten guide bar nuts to 8 – 9 Nm (71 – 80 in. lbs.) DO NOT over-tighten nuts. Damage may result.
  8. Keep chain properly tensioned at all times.
    NOTE
    All chains require frequent adjustment.
  9. Connect spark plug lead. ECHO-PPT-266-Power-Pruner- (67)IMPORTANT
    Check bar Part Number on your Power Pruner. Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.

FILING SAW CHAIN
Level 2.

IMPORTANT
Dull or damaged cutters will result in poor cutting performance, increased vibration, and premature saw chain failure.

WARNING
Always stop engine and disconnect spark plug wire before servic-ing guide bar and saw chain. Always wear gloves when filing saw chain, otherwise serious personal injury may result.

  1. Set round file (A) in cutter at 30° angle. One fifth (1/5) of the file should be exposed above top cutter edge.ECHO-PPT-266-Power-Pruner- (68)
  2. Keep file horizontal in cutter and file in one direction.ECHO-PPT-266-Power-Pruner- (69)
  3. File until cutter top and side bevel edges are sharp without nicks.ECHO-PPT-266-Power-Pruner- (70)
  4. Place depth gauge tool (B) firmly on top of cutter with .025 in. slot and end against front cutter raker. File cutter raker with flat file until flush with top of depth gauge.
  5. Finish cutter sharpening by rounding front raker edge (C) with flat file.
    ECHO-PPT-266-Power-Pruner- (70)
  6. Properly filed cutter is as shown.
  7. Apply clean oil and rotate saw chain slowly to wash away filings.
  8. If saw chain is coated or clogged with resin, clean in kerosene, then soak in oil. ECHO-PPT-266-Power-Pruner- (72)

 

TROUBLESHOOTING

ENGINE PROBLEM TROUBLESHOOTING CHART
Problem Check Status Cause Remedy
 Engine cranks – starts hard/ doesn’t start Fuel at carburetor No fuel at carburetor Fuel strainer clogged Fuel line clogged Carburetor Clean or replace Clean or replace

See your Echo dealer

Fuel at cylinder No fuel at cylinder Carburetor See your Echo dealer
Muffler wet with fuel Fuel Mixture too rich
  • Open choke Clean/replace air filter Adjust carburetor
  • See your Echo dealer
Spark at end of plug wire No spark Stop switch off Electrical problem Interlock switch Turn switch to ON See your Echo dealer See your Echo dealer
Spark at plug No spark Spark gap incorrect Covered with carbon Fouled with fuel Plug defective
  • Adjust to .65mm (0.026 in.) Clean or replace
  • Clean or replace Replace plug
 Engine runs, but dies or does not accelerate properly Air filter Air filter dirty Normal wear Clean or replace
Fuel filter Fuel filter dirty Contaminants/residues in fuel Replace
Fuel vent Fuel vent plugged Contaminants/residues in fuel Clean or replace
Spark Plug Plug dirty/worn Normal wear Clean and adjust or replace
Carburetor Improper adjustment Vibration Adjust
Cooling System Cooling system dirty/plugged Extended operation in dirty/dusty locations Clean
Spark Arrestor Screen Spark arrestor screen plugged Normal wear Replace
Engine does not crank N/A N/A Internal engine problem See your Echo dealer

DANGER
Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by ground-ing spark plug near cylinder plug hole, otherwise serious personal injury may result.

STORAGE

WARNING
During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.

Long Term Storage (over 30 days)
Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following

  1. Store unit in a dry, dust free place, out of the reach of children.
    DANGER
    Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark or serious personal injury may result.
  2. Place the stop switch in the “OFF” position.
  3. Remove accumulation of grease, oil, dirt and debris from exterior of unit.
    IMPORTANT
    Some tree sap and resins are corrosive. Thoroughly wash the guide bar and sprocket areas after each use, then coat metal parts with light oil.
  4. Perform all periodic lubrication and services that are required.
  5. Tighten all the screws and nuts.
  6. Drain fuel tank completely. Press purge bulb 6 -7 times to remove remaining fuel from carburetor then drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.
    • Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.
    • Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.
    • Observe the piston location through the spark plug hole. Pull the recoil starter handle slowly until the piston reaches the top of its travel and leave it there.
  7. Install the spark plug (do not connect spark plug cable).
  8. Install the guide bar cover on the guide bar and saw chain during storage.

SPECIFICATIONS

  • MODEL —————————————————- PPT-266/H/S
  • Length (Standard) (PPT-266/H) ————————- 2.72 m (8 ft. 11 in.)
  • Length (Standard) (PPT-266S) ————————— 1.96 m (6 ft. 5 in.)
  • Length (Extended) (PPT-266/H) ————————- 3.71 m (12 ft. 2 in.)
  • Length (Extended) (PPT-266S) ————————– 2.41 m (7 ft. 11 in.)
  • Length w/extension (PPT-266/H) ———————— 4.93 m (16 ft. 2 in.)
  • Length w/extension (PPT-266S) ————————- 3.94 m (12 ft. 11 in.)
  • Width (PPT-266/H) —————————————- .25 m (9.8 in.)
  • Width (PPT-266S) —————————————– .25 m (9.8 in.)
  • Height (PPT-266/H) ————————————— .25 m (9.7 in.)
  • Height (PPT-266S/H)————————————– .25 m (9.7 in.)
  • Weight (dry) (PPT-266) ———————————– 8.4 kg (18.5 lb.)
  • Weight (dry) (PPT-266H) ——————————— 8.2 kg (18.0 lb.)
  • Weight (dry) (PPT-266S) ——————————— 7.5 kg (16.5 lb.)
  • Engine Type ———————————————— Air cooled, two-stroke, single cylinder gasoline engine
  • Bore ———————————————————- 34.0 mm (1.34 in.)
  • Stroke ——————————————————– 28.0 mm (1.10 in.)
  • Displacement ———————————————– 25.4 cc (1.55 cu. in.)
  • Exhaust System ——————————————– Spark arrestor – catalytic muffler / muffler
  • Carburetor————————————————— Diaphragm model w/purge pump
  • Ignition System ——————————————– CDI (capacitor discharge ignition)
  • Spark Plug ————————————————– NGK BPM-8Y Gap 0.65 mm (0.026 in.)
  • Fuel ———————————————————- Mixed (Gasoline and Two-stroke Oil)
  • Fuel/Oil Ratio ———————————————- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and
  • J.A.S.O. M345- FD, two-stroke, air-cooled engine oil.
  • Gasoline —————————————————– Use 89 Octane unleaded. Do not use fuel containing methyl
  • alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use
  • alternative fuels such as E-15 or E-85.
  • Oil ———————————————————— Power Blend X TM Premium Universal 2-Stroke Oil
  • Fuel Tank Capacity —————————————- 0.50 lit. (16.9 US fl. oz.)
  • Starter System ———————————————- Automatic Recoil Starter
  • Clutch——————————————————– Centrifugal Type
  • Sprocket Type ———————————————- 6 tooth spur, 9.53 mm (3/8 in.) pitch
  • Power Transmission Shaft Assembly ——————- Aluminum Extrusion
  • Gear Case Ratio ——————————————– 1.5:1
  • Oiling System ———————————————- Automatic
  • Saw Chain Oil Capacity ———————————- 225 ml (7.6 oz.)
  • Handle ——————————————————- Right hand grip w/throttle trigger and lockout
  • Shoulder Harness —————————————— Standard
  • Idle Speed (RPM) —————————————— 2,850
  • Clutch Engagement Speed (RPM) ———————– 3,900
  • Wide Open Throttle Speed (RPM) ———————- 10,750
  • Guide Bar and Saw Chain (91) ————————– 305 mm (12 in.); 9.53 mm (3/8 in.) pitch, 0.050 gauge

WARRANTY STATEMENTS

ECHO LIMITED WARRANTY STATEMENT FOR
PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010

ECHO’S RESPONSIBILITY
ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship. Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions. THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS. IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY, AND IS NOT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS. Repair parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period. Any damage caused by improper installation or improper maintenance is not covered by this warranty. All parts or products replaced under warranty become the property of ECHO, Inc. This warranty is separate from the Emission control warranty statement supplied with your new product. Please consult the Emission Control Warranty Statement for details regarding emission related parts. For a list of Authorized ECHO Dealers refer to WWW.ECHO-USA.COM or call 1-800-432-ECHO.

OWNER’S RESPONSIBILITY
To ensure trouble free warranty coverage it is important that you register your ECHO equipment on-line at WWW.ECHO-USA.COM or by fill-ing out the warranty registration card supplied with your unit. Registering your product confirms your warranty coverage and provides a direct link if we find it necessary to contact you.
The owner shall demonstrate reasonable care and use, and follow preventative maintenance, storage, fuel and oil usage as prescribed in the operator’s manual. Should a product difficulty occur, you must, at your expense, deliver or ship your ECHO unit to an authorized ECHO servicing dealer for warranty repairs (within the applicable warranty period), and arrange for pick-up or return of your unit after the repairs have been made. For your nearest authorized ECHO servicing dealer, call ECHO’s Dealer Referral Center, at 1-800-432-ECHO or you can locate an ECHO servicing dealer at WWW.ECHO-USA.COM. Should you require assistance or have questions concerning ECHO’s Warranty Statement, you can contact our Consumer Product Support Department at 1-800-673-1558 or contact us through the web at WWW.ECHO-USA.COM.

PRODUCT WARRANTY PERIOD

RESIDENTIAL APPLICATION

  • 5 YEAR WARRANTY – All units for residential, or non-income producing use will be covered by this limited warranty for five (5) years from date of purchase.

EXCEPTIONS

  • For two-stroke engine powered products, the electronic ignition module, flexible drive cables, SRM solid drive shafts, and TC tines are warranted for the life* of the product on parts only.
  • Cutting attachments such as, but not limited to, bars, chains, sprockets, blades, and nylon trimmer heads for residential or non-income producing use will be covered for failures due to defects in material or workmanship for a period of 60 days from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.
  • ECHO’s Rapid Loader String Head carries a lifetime warranty on the line locking system, parts only; no labor. Refer to your operator’s manual for string head installation and maintenance instructions.
  • All SB-Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit.

COMMERCIAL APPLICATION

  • 1 YEAR WARRANTY – All Chain Saws, QuikVent Saws, and Cut-Off Saws for commercial, institutional, agricultural, industrial, or income producing use will be covered by this limited warranty for one (1) year from the date of purchase.
  • 2 YEAR WARRANTY – All other units for commercial, institutional, agricultural, industrial, or income producing use will be covered by this limited warranty for two (2) years from the date of purchase.

EXCEPTIONS

  • For two-stroke engine powered products, the electronic ignition module, flexible drive cables, SRM solid drive shafts and TC tines, are warranted for the life* of the product on parts only.
  • Cutting attachments such as, but not limited to, bars, chains, sprockets, blades, and nylon trimmer heads for commercial, institutional, agricultural, industrial, rental, or income producing will be covered for failures due to defects in material or workmanship for a period of 30 days from original product purchase date. Any misuse from contact with concrete, rocks, or other structures is not covered by this warranty.
  • ECHO’s Rapid Loader String Head carries a lifetime warranty on the line locking system, parts only; no labor. Refer to your operator’s manual for string head installation and maintenance instructions.
  • All SB-Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit.

RENTAL APPLICATION – 90 DAYS WARRANTY

  • Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of purchase.
  • ECHO’s liability under the “Lifetime” coverage is limited to furnishing parts specified under the PROdUCT wARRANTy PERIOd section of  this warranty statement for “Life” free of charge for a period of ten (10) years after the date of the complete unit’s final production.

PURCHASED REPAIR PARTS, SHORT BLOCKS AND ACCESSORIES

  • 90-day residential, or non-income producing warranty
  • 30-day commercial, institutional, agricultural, industrial, income producing, or rental application warranty

ATTENTION TWO-STROKE ENGINE POWER PRODUCT OWNERS
This ECHO two-stroke engine power product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance. To help ensure the performance of the unit, it is required to use two-stroke oil which meets the ISO-L-EGD Standard per ISO/CD 13738 and JASO M345FD Standards. ECHO Power Blend™ Two-Stroke Oil is a premium two-stroke oil specifically formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345FD Standards. The use of two-stroke oils designed for other applications, such as for outboard motors or lawnmowers can result in severe engine damage, and will void your two-stroke engine limited warranty.

THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY

  • Lack of lubrication or engine failure, due to the use of two-stroke oils that do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345FD Standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD compliant and JASO M345FD registered oil, will void the two-stroke engine limited warranty. ECHO Power Blend™ Two-Stroke Oil meets the ISO-L-EGD and JASO M345FD Standard. Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two-stroke oil used, per the statement listed in the EPA or California Emission Defect Warranty Explanation.
  • damage caused by use of gasohol, containing methanol (wood alcohol), or gasoline containing less than 89 octane. Only use gasoline which contains 89 octane or higher. Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE (methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual.
  • Engine damage caused by use of ether or any starting fluids.
  • damage caused by tampering with engine speed governor or emission components, or running engines above specified and recommended engine speeds as listed in your operator’s manual.
  • Operation of the unit with improperly maintained/removed cutting shield or removed/damaged air filter.
  • damage caused by dirt, pressure or steam cleaning the unit, salt water, corrosion, rust, varnish, abrasives, and moisture.
  • defects, malfunctions or failures resulting from abuse, misuse, neglect, modifications, alterations, normal wear, improper servicing, or use of unauthorized attachments.
  • Incorrect storage procedures, stale fuel, including failure to provide or perform required maintenance services as prescribed in the operator’s manual. Preventative maintenance as outlined in the operators manual is the customer’s responsibility.
  • Failures due to improper set-up, pre-delivery service or repair service by anyone other than authorized ECHO servicing dealer during the warranty period.
  • Certain parts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups.
  • Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Operator’s Manuals.
  • Overheating or carbon scoring failures due to restricted, clogged exhaust port or combustion chamber, including damage to spark arrester screen.
  • Adjustments after the first (30) thirty days and beyond, such as carburetor adjustment and throttle cable adjustment.
  • damage to gears or gear cases caused by contaminated grease or oil, use of incorrect type or viscosity of lubricants, and/or failure to comply with recommended grease or oil change intervals.
  • damage caused by loading SHREd ‘N’ VAC® beyond recommended capacity.
  • damage caused by pump or sprayer running dry, pumping or spraying caustic or flammable materials, or lack of or broken strainers.
  • Additional damage to parts or components due to continued use after operational problem or failure occurs. Should operational problem or failure occur, the product should not be used, but delivered as is to an authorized ECHO servicing dealer.
  • It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting WWW.ECHO-USA.COM. your receipt of purchase including date, model and serial number must be maintained and presented to an authorized ECHO servicing dealer for warranty service. Proof of purchase rests solely with the customer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific legal rights which vary from state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.

DISCLAIMER OF IMPLIED WARRANTIES
This limited warranty is in lieu of all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product. ECHO and its affiliated companies shall not be liable for any special incidental or consequential damage, including lost profits. There are no warranties extended other than as provided herein. This limited warranty may be modified only by ECHO.

SERVICING INFORMATION

PARTS/SERIAL NUMBER
Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Num-ber, Type and Serial Number of the unit with you. You can find these numbers on the engine housing. For future reference, write them in the space provided below.

  • Model No. _________________SN. ___________________

ECHO-PPT-266-Power-Pruner- (73)

SERVICE
Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or

  • call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site. When presenting your unit for Warranty service/repairs, proof of purchase is required.

ECHO CONSUMER PRODUCT SUPPORT
If you require assistance or have questions concerning the applica-tion, operation or maintenance of this product you may call the ECHO Consumer Product Support Department at 1-800-673-1558 from 8:30 am to 4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.

WARRANTY REGISTRATION
To ensure trouble free warranty coverage it is important that you regis-ter your ECHO equipment on-line at www.echo-usa.com or by filling out the warranty registration card supplied with your unit. Registering your product confirms your warranty coverage and provides a direct link between you and ECHO if we find it necessary to contact you.

ADDITIONAL OR REPLACEMENT MANUALS

  • Replacement Operator, Safety Manuals, and Parts Catalogs are available from your ECHO dealer or at www.echo-usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the ECHO Web Site for updated information.
  • Safety Videos are available from your Echo dealer. A $5.00 shipping charge will be required for each video.

DEALER?

CONSUMER PRODUCT SUPPORT

  • 1-800-673-1558
  • 8:30 – 4:30 Mon – Fri C.S.T.

 

ECHO-PPT-266-Power-Pruner- (74)

  • E04111001001/E04111003677 E04212001001/E04212020704
  • ECHO, INCORPORATED
  • 400 OAKWOOD ROAD
  • LAKE ZURICH, IL 60047
  • www.echo-usa.com
  • (H) E04411001001/E04411001246 (H) E04512001001/E04512003183
  • (S) E04711001001/E04711999999
  • (S) E04812001001/E04812999999

Documents / Resources

ECHO PPT-266 Power Pruner [pdf] Instruction Manual
PPT-266, PPT-266H, PPT-266S, PPT-266 Power Pruner, Power Pruner, Pruner

References

Leave a comment

Your email address will not be published. Required fields are marked *