ideal lux 8I238104 Eris-1 Pendant Light Small
Product Specifications
- Model: Eris-1 SP1
- Power: E27 max 1 x 42W
- Input Voltage: 220-240V, 50/60Hz
- Color Options: BIANCO (8021696238104), NERO (8021696249056)
Product Usage Instructions
Installation
- The lighting fitting should be installed by a qualified electrician.
- Follow the assembly instructions by reading the numerical progression provided in the manual.
Safety Instructions
- Always disconnect the power supply before starting installation or maintenance.
- Use appropriate mounting accessories such as screws and plugs suitable for the material.
- Do not look directly into the light source.
Maintenance and Care
- If the lamp does not turn on, replace the fuse.
- Do not disassemble the light source with LEDs.
- Ensure proper grounding as per safety class requirements.
Suspension lamp
- E27 max 1 x 42W / 220~240V 50/60Hz
- 8021696238104 BIANCO
- 8021696249056 NERO
DIMENSIONS
FEATURES
ASSEMBLY INSTRUCTIONS
- FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION
- THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN
- THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.
SAFETY INSTRUCTIONS
- This fitting is produced and tested in accordance with the strictest European safety standards(EN 60.598-1).
- This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
- As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
- If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
- Always isolate power before commencing installation, maintenance or repair.
- The luminaire contains certain parts which can be very hot.
- Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
- Always tighten the screws firmly to avoid contact problems.
- This fitting should only be installed indoors
- Luminaires not suitable for recessed on normally flammable surfaces.
- Luminaire not suitable for direct mounting on normal flammable surfaces.
- This fitting is only suitable for fixing to the ceiling.
- This fitting is only suitable for fixing to the wall.
- The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
- Only use lamps which do not exceed the maximum specified wattage.
- Always observe the minimum distance between the lamp and the surface being lit, as shown inthe icon. The lamp can cause a fire if the minimum distance is not observed.
- Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Waituntil they cool down before replacing.
- Cracked or broken safety glass has to be replaced immediately. Use only manufcturer approvedparts complying with regulations.
- Light source with not-substitutable light emitting diode (LED). Do not disassemble the productsince the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Donot use solvents or strong detergents.
- This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
- Class | Electrical safety is guaranteed by the main insulation and an additional protective conduc-tor (earthing) connected with the metal frame of the lamp. Earthing is obligatory.
- Class ll Electrical safety guaranteed by the main insulation and a double or reinforced insulation.Earthing not necessary.
- Class lll Electrical safety guaranteed by very low power supply (less than 50 Volt). Earthingexcluded.
- Not protected.
- Protected against solid objects greater than 50 mm.
- Protected against solid objects greater than 12 mm.
- Protected against solid objects greater than 2,5 mm,
- Protected against solid objects greater than 1mm.
- Dust protected.
- Totally protected against dust infiltration.
- Not protected.
- Protected against vertically falling water drops.
- Protected against water drops falling with a maximum angle of 15° to the vertical axis.
- Protected against rain.
- Protected against splashing water.
- Protected against water jets.
- Protected against strong water jets,
- Protected against temporary immersion.
- Protected against prolonged immersion
- Luminaire not suitable for covering with thermally insulating material.
- Caution, risk of electric shock.
- Do not stare at the operating light source.
IDEAL LUX s.r.l.
- Via Taglio Destro 32
- 30035 Mirano (VE) Italy
- www.ideal-lux.com
FAQS
Q: Can the LED light source be replaced?
A: No, the LED light source is non-replaceable. Do not attempt to disassemble it.
Q: What should I do if the lamp does not turn on?
A: Check and replace the fuse if needed. If the issue persists, contact a qualified electrician for further assistance.
Q: Is grounding mandatory for this product?
A: Yes, grounding is mandatory as per safety class requirements to ensure electrical safety.
Documents / Resources
 |
ideal lux 8I238104 Eris-1 Pendant Light Small [pdf] Instruction Manual 8I238104 Eris-1 Pendant Light Small, 8I238104, Eris-1 Pendant Light Small, Pendant Light Small, Light Small |
