cecotec 3000 W Iron Professional Centro Steam Station
Specifications
- Designed for domestic use only
- Not intended for bars, restaurants, farmhouses, hotels, motels, and offices
Safety Instructions
Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.
- All safety instructions must be closely followed when using the appliance.
- This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
- The plug must be removed from the power socket before cleaning the appliance.
- The filling opening must not be opened during use.
- The iron should be used and placed on a stable, flat, and heat-resistant surface.
- Ensure that the surface on which the support is placed is stable.
- Do not place the iron on or near a hot gas flame, electric element, or on a heated oven.
- The temperature of accessible surfaces may be high while the appliance is in use and could cause burns. Do not touch hot surfaces during operation or immediately after.
Parts and Components
The iron professional comes with the following parts and components:
- Iron
- steam station
Before Use
Before using the iron professional, please ensure the following:
- Check that the mains voltage matches the voltage specified
- Ensure that the iron and steam station are properlyconnected
- Fill the water tank with clean water
operation
To operate the iron professional, follow these steps:
- Turn on the power switch
- Wait for the iron to heat up
- Adjust the temperature and steam settings according to your needs
- Press the steam button to release the steam
- Iron the clothes using smooth, continuous movements
Cleaning and Maintenance
To clean and maintain the iron professionally, follow these instructions:
- Unplug the appliance and let it cool down
- Empty and clean the water tank
- Clean the soleplate with a damp cloth
- Store the appliance in a cool, dry place
Technical Specifications
- Power: [insert power specification]
- Voltage: [insert voltage specification]
- Weight: [insert weight specification]
Disposal of Old Electrical and Electronic Appliances
Please follow the local regulations for the disposal of old electrical and electronic appliances.
Technical Support and Warranty
If you require technical support or have any issues with their professional, please contact our customer support team. The appliance is covered by a [insert warranty period] warranty.
Copyright
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the copyright holder.
FAQ
- Q: Can children use the iron professional?
A: This appliance can be used by children aged 8 years and above, provided they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. - Q: How do I clean the iron professionally?
A: To clean the iron professionally, unplug the appliance, let it cool down, empty and clean the water tank, and clean the soleplate with a damp cloth. - Q: What is the warranty period for the iron professional?
A: The iron professional is covered by a [insert warranty period] warranty.
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.
- All safety instructions must be closely followed when using the appliance.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance should not be carried out by unsupervised children.
- The appliance must not be left unattended while connected to the power supply.
- The plug must be removed from the socket before filling up the water tank.
- The filling opening must not be open during use.
- The appliance must be used and placed on a flat, stable, and heat-resistant surface.
- When placing the iron on the base, make sure the surface on which the base is placed is stable.
- Do not use the appliance if it has been dropped, showsvisible damage, or is leaking.
- Keep the appliance and its power cable out of reach of children under 8 years old when plugged in or cooling down.
- This symbol means “Caution: hot surface”. The temperature of accessible surfaces may be high while the appliance is in use and could cause burns. Do not touch hot surfaces during operation or immediately after.
- This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
- When using electrical and electronic appliances, basic precautions must always be followed to reduce the risk of fire, electrical shock, and injury.
- Ensure that the mains voltage matches the voltage specified on the device rating label and that the plug is earthed.
- Do not immerse the cable, plug, or any other non-removable part of the device in water or any other liquid or expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the device.
- Check the power cable regularly for visible damage. If the cable is damaged, it must be repaired by the official Cecotec
Technical Support Service to avoid any type of danger. - If the appliance falls accidentally in water, unplug it immediately. Do not touch the water!
- Do not expose the appliance to atmospheric agents.
- Do not use the iron on very wet fabrics.
- Do not twist, bend, pull, or damage the power cable. Protect it from sharp edges and heat sources. Do not allow the cable to touch hot surfaces. Do not let the cable hang over the edge of the surface or worktop.
- This appliance is not intended to be operated by means of an external timer or separate remote-control system.
- Turn off and unplug the appliance from the mains supply
- when not in use and before cleaning it. Pull from the plug, not the cable, to disconnect it from the outlet.
- This appliance is designed to iron textiles. It is designed for domestic use only and, therefore, not suitable for commercial use. Do not use outdoors.
- To protect against burns or injuries to persons, do not iron textiles while being worn on the body.
- Do not use any accessory that has not been recommended by Cecotec, as they might cause injuries or damage.
- To protect against burns or injuries, do not direct steam toward persons or animals when ironing.
- Keeping the iron at maximum temperature for too long may cause discoloration, which will not affect the performance of the appliance.
- Do not try to repair the appliance by yourself. Contact the official Cecotec Technical Support Service for advice.
- Cleaning and maintenance must be carried out according to this instruction manual to make sure the appliance functions properly. Turn off and unplug the appliance before moving and cleaning it. Make sure the iron has completely cooled down before storing it.
- Cecotec takes no responsibility for any damage caused by misuse of the machine. Any misuse or non-compliance with these instructions voids the warranty and Cecotec’s liability.
- Warning: All our ironing range products have undergone quality control tests previous to their commercialization. These tests consist of filling the water tank to check tightness and to ensure the correct operation of the appliance. Once the test has been carried out, the tank is emptied and dried, but some water may still remain inside.
PARTS AND COMPONENTS
Fig. 1
- Filling opening
- Tank handle
- Water tank
- Base
- Cable storage slot
- Temperature knob
- Soleplate
- Handle
- Steam trigger
- Lock lever
- Iron
- Heat-insulated bracket
- Control panel
Fig. 2.
- 70 ºC-120 ºC (Minimum)
- 100 ºC-160 ºC
- 140 ºC-210 ºC
- 170 ºC-225 ºC (Maximum)
Buttons and indicator lights Fig. 3
- Power button
- Steam level selection button
- Power indicator light
- Descaling indicator
- Filling indicator
- Low-steam indicator
- Medium-steam indicator
- High-steam indicator
BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good condition. If there is any piece missing or in bad condition, contact the official Cecotec Technical Support Service immediately.
Box Content
- Steam station
- Instruction manual
OPERATION
First use
- Before switching on the iron, remove all protective stickers and adhesives from the appliance.
- Fill the water tank with water and heat up the iron. Then, iron over a piece of damp cloth for several minutes for the purpose of removing any residue on the soleplate.
- Note: some parts of the iron have been lightly oiled, which may cause the iron to emit a slight smoke when it is first switched on. Smoke will disappear after a short time.
- It is normal for the appliance to give off a strange odour on first use. The smell will disappear after a short time.
- When you switch on the appliance, the steam generator may make a pumping sound. This is normal. This sound indicates that water is being pumped into the steam generator.
- The soleplate may automatically emit steam for approximately three seconds while heating up.
Filling the water tank
- Remove the water tank by pulling the handle when the iron is switched off. Fill the tank through the filling opening.
- Make sure the water does not exceed the MAX. mark on water tank.
On/off
- The appliance must be plugged in for switch-on. Press the power button: the power indicator light will switch on. Low Steam is the default steam setting upon switch-on, so the corresponding indicator light will come on.
- Press the power button for two seconds to switch off the appliance.
Steam level selection
- The steam level can be changed by pressing the steam level selection button.
- Depending on which one is chosen, the corresponding indicator light will flash and remain steady once the iron is finished preheating.
Temperature knob
Adjust the ironing temperature according to the fabric to be ironed. To enable the Steam function, select the steam temperature range, otherwise steam will not be sprayed properly.
Temperature indicator light
When the iron is heating up, the temperature indicator will light up. Once the iron has reached the selected temperature, it will switch off. The temperature indicator light will turn on and off while the iron maintains the selected temperature during ironing.
Lock button
Place the steam station on the base heat-insulated support and move the lock lever in the locked position to safely leave the iron on the base. To unlock the iron, move the lock lever to the unlocked position. You can now start ironing. The whole steam station can be lifted by the handle, as long as the iron is in the locked position on the base. Fig 4.
Steam trigger
After pressing the power button and choosing the desired steam level, and the indicator lights stop flashing, the iron will have already reached the temperature at which steam can be used.
Then, lightly press the steam trigger to make steam come out continuously from the soleplate (fig. 5): When the steam trigger is fully released, the appliance can only be used for dry ironing without steam. Fig. 5
Steam burst
Press the steam trigger twice in less than one second to activate the steam burst function. Use the steam burst function to remove stubborn creases.
Filling indicator
When the water level in the tank is low, the Filling indicator will light up, followed by a buzzing sound; the, the steam generator will stop working. When this happens, add water to the water tank. To do this, remove the water tank, fill it up through the filling opening, and put it back in place. Fig. 6
Cleaning indicator
If the Descaling indicator light comes on, the steam generator needs to be cleaned of mineral residue. To clean it, follow the steps specified in the “Cleaning and maintenance” section. Once the residue has been removed, the indicator light will switch off.
Cable storage slot
When not in use, the steam supply hose and power cable can be stored in the cable storage slot.
Auto switch-off
The appliance will automatically switch off after 10 minutes of inactivity.
Dry ironing
- Put the appliance on the heat-insulated bracket.
- Plug the power cord into the outlet. This will cause the temperature indicator light and the MAX steam indicator light to light up.
- Set the temperature regulator using the temperature knob. Once done, the iron will start to heat up.
- When the desired temperature is reached, the temperature indicator light will go out. You can start ironing now.
Warning
Do not touch the soleplate before it cools down!
Steam ironing
- Take the water tank handle to remove it and fill it with water through the filling opening. Use purified water with little limescale. After that, re-install the water tank. The maximum water tank capacity is 1.8 L. The water level must not exceed the MAX mark.
- Place the steam station on the base.
- Connect the power cable to the power outlet and press the power button. The default low steam intensity indicator light will start flashing. There are three modes: low, medium and high steam intensity. Select the desired steam intensity for each garment according to your needs. Ensure there is enough water in the tank.
- Adjust the temperature according to the fabric to be ironed, and the indicator light will light up. The steam station will start emitting heat. Refer to the ironing tips and the table in this manual when adjusting the temperature.
- The water in the steam generator will heat up and, after a few minutes, the temperature indicator light will switch off. This indicates that the soleplate has reached the desired temperature. When the default steam intensity indicator light changes from flashing to steady, it indicates that the iron is ready for use.
- Lightly press the steam trigger to make steam come out continuously from the soleplate.
Warning
Never direct steam at people!
After ironing, press the Power button for two seconds: the appliance will switch off along with all indicators. Unplug the power cable from the wall socket. Be careful: the soleplate may still be hot. Never touch it if hot. Place the iron on the heat-insulated support until it has cooled down completely.
Ironing tips
| Adjustment | Temperature | Fabric |
| 1 | 70 ºC-120 ºC | Acetate, elastane, polyamide, polypropylene. |
| 2 | 100 ºC-160 ºC | Cupro, polyester, silk. |
| 3 | 140 ºC-210 ºC | Triacetate, viscose, wool. |
| Maximum | 170 ºC-225 ºC | Cotton, linen. |
- Always check for ironing instructions on the garment label. If present, follow these instructions.
- The appliance heats up faster than it cools down. Therefore, start by ironing garments that require lower temperatures, such as synthetic-fibre garments.
- If the garment is composed of different types of fibres, you should always select the lowest ironing temperature.
- Silk and other fabrics that tend to be shiny should be ironed on the inside.
- Velvet and other textures that become shiny quickly should be ironed in the same direction with light pressure. Always keep the iron moving.
- Pure-wool fabrics (100% wool) can be ironed with the steam iron. Set the temperature knob preferably to the third position and use a dry cloth between the iron and the garment.
- Never iron over zips or rivets. This may damage the iron.
Warning
When woollen fabrics are ironed, they may become shiny. In this case, it is advisable to turn the garment inside out and iron on the inside.
CLEANING AND MAINTENANCE
- Turn off, unplug the appliance from the power supply, empty the water tank (do it after each use) and allow it to cool down completely.
- Wipe off any residue left on the soleplate with a damp cloth or a non-abrasive (liquid)cleaner.
Warning
Do not use abrasive cleaners or scouring pads to clean the device.
- Use a soft, damp cloth to clean the surface of the device. Wipe off any water droplets on the base and the heat-insulated bracket with a dry cloth.
- If any fabric has stuck to the soleplate, use a cloth dampened with vinegar to clean the sole.
Cleaning/descaling
- To remove the mineral residue accumulated inside the steam generator, follow the steps below.
- Turn the base upside down and place it horizontally on a flat surface. Make sure that the base is stable.
- Gently pry the cover with a screwdriver and remove it (fig. 7).
- Refill the steam generator tank.
- Put the cover back in position by pressing on the hole and shake the base of the iron to remove any mineral residue that may be stuck to it.
- Open the cover again and empty the steam generator tank.
- Close the cover again.
Warning
- To avoid burns, make sure the steam generator has cooled down completely.
- If the appliance is not going to be used for a long time, empty the water tank. Place the iron on the support and move the lock lever to the locked position.
TECHNICAL SPECIFICATIONS
- 05199_Iron Professional
- 2520-3000 W, 220-240 V~, 50-60 Hz
Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
- This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
- Consumers must contact their local authorities or retailers for information concerning the correct disposal of old appliances and/or their batteries.
- Compliance with the above guidelines will help protect the environment.
TECHNICAL SUPPORT AND WARRANTY
- Cecotec shall be liable to the end-user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
- It is recommended that repairs be carried out by qualified personnel.
- If at any moment you detect any problem with your product or have any doubts, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.
COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
www.cecotec.es
Cecotec Innovaciones S.L. Av. Reyes Católicos, 60 46910, Alfafar (Valencia), Spain
Documents / Resources
 |
cecotec 3000 W Iron Professional Centro Steam Station [pdf] Instruction Manual 3000 W Iron Professional Centro Steam Station, 3000 W, Iron Professional Centro Steam Station, Professional Centro Steam Station, Centro Steam Station, Steam Station |
Cecotec Tienda Oficial | Envío Gratis | Mejor Precio 
