HOLLYLAND MARS 400 Wireless Video Transmission User Manual

HOLLYLAND MARS 400 Wireless Video Transmission

USER MANUAL

DESCRIPTION

Thank you for purchasing Hollyland MARS 400 wireless HD video transmission system. The product uses the latest coding, decoding technology and SG wireless transmission technology and can achieve ultra-low latency wireless video transmission. II has a transmission range over 40011 with a clean line of sight (LOS), supports up to 1080P 60Hz image resolution, and in the end achieves lull HD HDMI video transmission.

KEY FEATURES

• iOS & Android App Monitoring
• Transmitter Supports up to 2 Receivers
• OLED Display Screen
• Channel Scan
• Three Application Scene Modes
• Low-Battery Warning Indicator
• 40011 Transmission Range (LOS)
• Less than 0.1 s Latency
• HDMI Input & HDMI Loop Out, Dual HDMI Output
• USB Firmware Upgrade
• Stable & Reliable Industrial Metal Case

APPLICATIONS

• lndie Filmmaking
• Live Broadcasting
• Sports Activities
• Education Recording
• Wedding Ceremonies
• Corporate Events

PACKING LIST

1. Transmitter x1
2. Receiver x1
3. Antenna x5
4. User Manual x1
5. ColdShoe x1
6. Expansion Accessory x1
7. DCAdapter x1
8. USB Type-C OTG Adapter x1
9. C-Shaped Screw x1

TYPICAL SETUP

This wireless HD video transmission system uses the latest wireless communication technology and transmits ultra-low latency HD video. The transmitter supports HDMI input and HDMI loop out, while the receiver supports dual HDMI output. It is equipped with OLE □ display screen and supports iOS & Android App Monitoring.

PRODUCTINTERFACES

A – TRANSMITTER

1. Antenna Interface
2. HDMllnput
3. HDMI Loop Out
4. DClnput
5. OLED Display Screen
6. Down
7. Menu/OK
8. Up
9. USB Upgrade Interface
10. Fan Air Outlet
11. PowerSwitch
12. 1/4 Screw Hole

B~ RECEIVER

1. Antenna Interface
2. HDMI Output
3. DClnput
4. OLED Display Screen
5. Down
6. Menu/OK
7. Up
8. USB Upgrade Interface
9.  FanAirOutlet
10. Power Switch
11. 1/4 Screw Hole

INSTALLATION

VERTICAL INSTALLATION

1. Install the antennas as demonstrated
2. Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mount it to the camera
3. Connect to a power supply (Compatible with NP-F970 or the same series of batteries)
4. Turn on the devices

INSTALLATION

HORIZONTAL INSTALLATION

1. Install the antennas as demonstrated
2. Connect the expansion accessary with the 1/4 screw hole at the bottom of the transmitter by a C-shaped screw
3. Secure the cold shoe with the 1/4 screw hole on the expansion accessary and install them on the camera
4. Connect to a power supply (Compatible with NP-F970 or the same series of batteries)
5. Turn on the devices

OLED DISPLAY

A-TRANSMITTER	B-RECEIVER
1. Device ID	1. Device ID
2. Scene Mode	2. Scene Mode
3. USB Flash Detection Display	3. USB Flash Detection Display
4. Low Battery Status	4. Low Battery Status
5. Receiver Number	5. Signal Strength
6. Signal Strength	6. Device Number
7. Channel Display	7. Channel Display
8. Video Format	8. Video Format

STATUS DESCRIPTION

1.When the devices are disconnected, a cross “x” will appear above the signal strength bars on both the transmitter and the receiver.As shown in the above picture, device 1 is on connected status, while device 2 is on disconnected status.
2.As shown in the above picture, “NO VIDEO” will appear on the screen if there is no video input detected, and the video format will appear if there is a video input detected.

3. When the device detects a connection to a USB flash, the USB flash icon will appear on the screen.
4. When the voltage is too low, the low battery alarm will be triggered and the lowbattery icon will flash slowly.

CAUTION

• When the receiver is not connected, it will not display the device ID.
• When the receiver is turned on, the channel number will not be displayed before the receiver is connected with the transmitter.

QUICK GUIDE

TRANSMITTER

1. Long press the “MENU” button for about 3 seconds to enter the root menu Interface. The root menu has “SCENE MODE”, “SYSTEM SETTING” and “VERSION INFO” options.
2. Select “SCENE MODE”, then click the “OK” button, you would be able to select “IMAGE MODE”, “BALANCE MODE” or “SPEED MODE”.
3. Select “SYSYTEM SETTING”, then click the “OK” button, you would be able to select “LANGUAGE (Chinese/English)”, “PAIR”.
4. Select “VERSION INFO”, then click the “OK” button, you would be able to check the version information.

RECEIVER

1. Press the “MENU” button for about 3 seconds to enter the root menu interface.
The root menu has “CHANNEL SCAN”, “SYSTEM SETTING” and “VERSION INFO” options.
2. Select “CHANNEL SCAN”, then click the “OK” button, the device will scan and detect the current frequency environment, available channels will display with a “../”, while unavailable channels will display with a “x”.
3. Select “SYSTEM SETTING”, then click the “OK” button, you would be able to select “LANGUAGE” (Chinese/English), “PAIR”.
4. Select “VERSION INFO”, then the click “OK” button, you would be able to check the version information.

CHANNEL CHANGE

Press the channel button “UP/DOWN” on the transmitter or the receiver to change the current channel. Press “OK” to confirm the channel number, then the channel of the transmitter and the receiver will be synchronously and automatically changed.

DEVICE UPGRADE

1. Copy the upgrade firmware to a USB flash.
2. Insert the USB flash into the OTG adapter and connect it with the Type-C upgrade interface on the transmitter.
3. Reset the device, then enter the upgrade interface.
4. Once the upgrade is complete, it will display with “upgrade successfully”, and the device will be automatically restarted.

IOS & ANDROID APP MONIRTORING

IOS System and Android System lnstallatlon and Use

1. The application name is “HollyView”. It is available on Hollyland’s official website and Android APP store.

2.Method No.1
Scan the QR code on the back of the transmitter then the APP will be automatically connected to the device. Enter the main interface and you would be able to monitor the video shot on the camera.

Method No.2
Input the device’s ID number and manually connect the device. Enter the main interface then you would be able to monitor the video shot on the camera.

PARAMETERS

Transmitter (TX)

Receiver (RX)

Interface

HDMI Input (Type A Female) HDMI Loop Out {Type A Female) 2 Antenna Interfaces (RP-SMA Male) DC Input, Type-C USB;

HDMI Output 1 (Type A Female) HDMI Output2 (Type A Female) 2 Antenna lnter1aces (RP-SMA Male) DC Input, Type-C USB;

Supply Interface

6-18VDC

6-16VDC

Power Consumption

<10W

<6W

Waight

165g

165g

Size

110*62*2Bmm  (L*W-H)   External antennas and battery plate excluded

110*62 mm  (L”W”H)   External antennas and battery plate excluded

Input Video Formal

HDMI: 480P60,576P50,720P50/60, 1080i50/60,10B0PS0/50/60

I

Output Video Format

I

HDMI: 480P60,576P50,720P50/60, 10B0iS0/60,10B0PS0/50/60

Fraquancy

5GHz

5GHz

Moduladon Mode

DFDM

OFDM

Transmission Power

Maximum 21dBm

I

Receiver SeneHlvlty

I

-llOdBm

Transmission Latency

Lessthan0.1s

Bandwidth

20MHz

20MHz

FAQ (Frequently Asked Questions)

CONNECTION ISSUES

1. Check and make sure that the power supply functions well on both the transmitter and the receiver.
2. If the device displays with the low-voltage sign, change or charge the battery in time.
3. Try to change to another channel and connect the devices again for there might be interference for the current channel.
4. Re-pair the devices.
5. Check if the antennas on the transmitter and receiver are correctly installed.

DISPLAY ISSUES

1. Check if the video source is connected to the HDMI IN interface correctly.
2. Check if the OLED displays the video format. If not, check if the HDMI cable connected to transmitter is correctly linked with the camera and if the camera has the video output.
3. Check if the format of the camera output interface is compatible with this system.

IMAGE LOW QUALITY ISSUES

1. Set “SCENE MODE” to “IMAGE MODE”.
2. Check if the HDMI IN/OUT cables are correctly connected.
3. Make sure both the transmitter and the receiver are installed at least 1.5m above the ground.
4. Check the signal strength status. If it is with only 1 bar signal, it means that the signal strength is very weak. In this case, change the channel or shorten the distance between the devices.

APP CONNECTION ISSUES

1. Check the number of connected APP devices. When 1 transmitter is connected with only 1 or none receiver, the system can still connect up to 4 App monitoring devices; or 1 transmitter can connect with maximum 2 receivers and no APP monitoring device.

Q: How do I update the product’s firmware?

A: To update the firmware, follow these steps:

1. Visit the official product website and download the latest firmware version.
2. Connect the product to your computer using a USB cable.
3. Launch the firmware update software and follow the on-screen instructions to complete the update process.

Q: Can I use the product with multiple devices simultaneously?

A: Yes, the product supports multi-device connectivity. You can connect it to multiple devices using the provided connectivity options.

Q: Is the product compatible with Mac operating systems?

A: Yes, the product is compatible with Mac operating systems.
Please refer to the user manual for specific instructions on Mac setup and usage.

Q: What should I do if the product stops working suddenly?

A: If the product stops working suddenly, try the following troubleshooting steps:

1. Check the power supply and ensure it is properly connected.
2. Restart the product and any connected devices.
3. If the issue persists, refer to the troubleshooting section of the user manual or contact customer support for further assistance.

HollylandTech
E, HollylandTech
~ HollylandTech
~
eHOLLYLAND
WWW.HOLLYLAND-TECH.COM
WIRELESS VIDEO TRANSMISSION SYSTEM
~ sales@Hollyland-tech.com
~ www.hollyland-tech.com

SHENZHEN HOLLYLAND TECHNOLOGY CO,. LTD
BF, 5D Building, Skyworth Innovation Valley, Tangtou, Shiyan, Baoan District Shenzhen, China.

Documents / Resources

HOLLYLAND MARS 400 Wireless Video Transmission [pdf] User Manual MARS 400 Wireless Video Transmission, MARS 400, Wireless Video Transmission, Video Transmission, Transmission

References

• Manual-Hub.com – Free PDF manuals!
• User Manual