AT T APM7210 Business Wi-Fi Extender

AT T APM7210 Business Wi-Fi Extender

Instruction for use

STEP 1

  1. Plug in the extender with the included power adapter.
    Instruction for use
    STEP 2
  2. Wait for the extender to power up and for the LED lights to turn solid. (Approx. 2-3 minutes)
    Instruction for use
    STEP 3
  3. Pair the extender with your AT&T 5G Gateway*.
    Wireless Method
    Step 1 
    For the best experience, place the extender next to the 5G gateway during setup.
    Step 2 Press WPS (Wi-Fi Protected Setup) button on the back of the 5G gateway. The Wi-Fi LED will flash blue.
    Step 3 Press WPS button on the back of the extender.
    Step 4 The Wi-Fi LED on both the extender and 5G gateway will change to solid blue and the Mesh LED will illuminate.
    Step 5 Setup complete, move extender to desired location.
    Wireless Method
    *Connection with AT&T Internet Air™ for Business 5G Gateway required (gateway and internet service sold separately)
  4. Wi-Fi extender placement and proximity.
    The extender should be placed within wireless range of the 5G gateway, no more than 30 feet away.
    The design and structure of your environment may impact performance. For best results, position the extender closer so the Mesh LED illuminates green.
    Instruction for use
  5. Connect your devices to the extender’s Wi-Fi or Ethernet ports.
    Network name & password
    The extender will share the same network name and password as the 5G gateway it’s paired with.
    Web UI Settings
    You can manage additional settings from the Web UI of your 5G gateway.
    Instruction for use

DEVICE LAYOUT

Get to know your device

  • Front
    Device Layout
  • Back
    Device Layout
  • Bottom
    Device Layout
  • Top
    Device Layout

GETTING STARTED

LED status table

Get started

Note: If the Mesh LED is blue or red, you might try relocating the extender closer to the gateway or extender it’s paired with to get a stronger mesh connection.

ALTERNATIVE PAIRING

Alternative pairing method

Step 1 Connect one end of an Ethernet cable in the main gateway port of your choice.
Step 2 Connect the other end to the Ethernet port of your choice on your extender
Step 3 The Mesh LED on the extender will illuminate.

  • 5G Gateway
    Alternative pairing method
  • Extender
    Alternative pairing method

SOFTWARE UPDATE

Complete firmware update

Auto-Update

Your Wi-Fi extender will periodically check for updates, including after each device power cycle. Most updates will be automatically installed overnight. If an update requires manual installation, the system light will illuminate solid blue until the update has been completed.

Manual Update 

Step 1 Use a web browser to access the Web UI of the main 5G gateway.
Note: You can find the default web address on the gateway label.
Step 2 From the dashboard, click the Wi-Fi Extender Icon tile.
Step 3 Click Check for update Icon next to the device name.
Step 4 The status will update to indicate if an update is available.
Step 5 Click Download and Update Icon. A progress bar will appear, and the System LED Light will flash blue during the installation process.
Step 6 Your Wi-Fi extender will power cycle upon successful completion.

Note: Your internet access may be momentarily interrupted while the installation is taking place, and the device is rebooting.

NOTE: All device illustrations need to be replaced with actual device images. All graphics, logos and text MUST be a minimum of 3/16” or 0.1875” away from folds and die cut edge.

LEGAL

Network performance and internet speeds may vary due to proximity, connection method, or number of extenders connected. No more than three extenders recommended. Internet service sold separately. 5G available only in 5G coverage areas.

©2024 AT&T INTELLECTUAL PROPERTY. ALL RIGHTS RESERVED. AT&T, the Globe and other marks are trademarks of AT&T Intellectual Property. All other product or service names are the property of their respective owners.

Customer Support

NEED HELP?

Call our customer care team at 1-800-331-0500

To launch help for your 5G gateway and Extender, scan this code with your camera

QR Code

or visit att.com/5G-Gateway

Logo

Documents / Resources

AT T APM7210 Business Wi-Fi Extender [pdf] User Guide
APM7210 Business Wi-Fi Extender, APM7210, Business Wi-Fi Extender, Wi-Fi Extender, Extender

References

Leave a comment

Your email address will not be published. Required fields are marked *