ELATION PROFESSIONAL Z120 LED Fuze Wash
©2022 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ELATION brands and product names are trademarks or registered trademarks of their respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu
DOCUMENT VERSION
Please check www.elationlighting.com for the latest revision/update of this manual.
Date | Document Version | Software Version ≥ | DMX Channel Modes |
Notes |
08/23/16 | 1.2 | 1.05 | 15/ 16/ 17 / 19 | Added Omega Bracket installation diagram updated rigging diagram, and added max power consumption specification. |
09/15/16 | 1.3 | 1.05 | 15/ 16/ 17 / 19 | Added Snoot installation diagram, dimensional drawings and SKU. |
09/19/16 | 1.4 | 1.05 | 15/ 16/ 17 / 19 | Added missing section of DMX traits. |
04/06/17 |
1.5 |
N/C | NO CHANGE | Updated Strobe DMX Values (See highlighted values). |
05/14/20 | 1.6 | 1.15 | NO CHANGE | Updated System Menu and DMX Channels/Functions. |
07/27/20 | 1.7 | N/C | NO CHANGE | Updated thermal |
09/26/20 | 1.8 | 1.16 | NO CHANGE | Updated primary/secondary modes |
08/29/22 | 2.0 | N/C | NO CHANGE | Pan & Tilt angles added |
GENERAL INFORMATION
INTRODUCTION
Congratulations, you have just purchased one of the most innovative and reliable lighting fixtures on the market today! This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit. These instructions contain important information regarding safety during use and maintenance. FOR PROFESSIONAL USE ONLY!
UNPACKING
Every fixture has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer support team for further instructions. Please do not return this unit to your dealer without first contacting customer support at the number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.
BOX CONTENTS
- (1) Omega Bracket
- (1) Locking Power Cable
CUSTOMER SUPPORT
Elation Professional® provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.elationlighting.com for any comments or suggestions. For service related issue please contact Elation Professional®.
ELATION SERVICE USA – Monday – Friday 8:00am to 5:00pm PST
Voice: 323-582-3322 Fax: 323-832-9142
E-mail: support@elationlighting.com
ELATION SERVICE EUROPE – Monday – Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 30 Fax: +31 45 546 85 96
E-mail: support@elationlighting.eu
WARRANTY REGISTRATION
Please complete and mail in the enclosed warranty card or register online: http://www.elationlighting.com/Login.aspx to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. Items returned without a R.A. number clearly marked on the outside of the package will be refused and returned at customer’s expense. You may obtain a R.A. number by contacting customer support.
IMPORTANT NOTICE !
There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. Damages resulting from modifications to this fixture and/or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and/or repairs.
LIMITED WARRANTY
- Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be free of manufacturing defects in material and workmanship for a period of two years (730 days), and Elation Professional® product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months (180 days), from the original date of purchase. This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
- For warranty service, send the product only to the Elation Professional® factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated point within the United States. If any product is sent, it must be shipped in its original package and packaging material. No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof.
- This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified in any manner which Elation Professional® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the Elation Professional® factory unless prior written authorization was issued to purchaser by Elation Professional®; if the product is damaged because not properly maintained as set forth in the product instructions, guidelines and/or user manual.
- This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic check-up. During the periods as specified above, Elation Professional® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of Elation Professional® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Professional®. All products covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to that effect.
- Elation Professional® reserves the right to make changes in design and/or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
- No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by Elation Professional® in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall Elation Professional® be liable for any loss and/or damage, direct and/or consequential, arising out of the use of, and/or the inability to use, this product.
- This warranty is the only written warranty applicable to Elation Professional® products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
SAFETY INSTRUCTIONS AND GUIDELINES
This fixture is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. The manufacturer of this device is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of this fixture and only the original rigging parts (omega brackets) included with this fixture should be used for installation. Any modifications to the fixture and/or the mounting hardware included will void the original manufactures warranty and increase the risk of damage and/or personal injury.
- PROTECTION CLASS 1 – FIXTURE MUST BE PROPERLY GROUNDED
- DO NOT PLUG FIXTURE INTO A DIMMER PACK!
- NEVER OPEN THIS FIXTURE WHILE IN USE!
- UNPLUG POWER BEFORE SERVICING FIXTURE!
- NEVER TOUCH FIXTURE DURING OPERATION, AS IT MAY BE HOT! KEEP FLAMMABLE MATERIALS AWAY FROM FIXTURE!
- INDOOR / DRY LOCATIONS USE ONLY!
- DO NOT EXPOSE FIXTURE TO RAIN AND MOISTURE!
- NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE!
- RETINA INJURY RISK – MAY INDUCE BLINDNESS!
- SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK!
- DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before serving.
- DO NOT shake fixture, avoid brute force when installing and/or operating fixture.
- DO NOT operate fixture if the power cord has become frayed, crimped and/or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating.
- DO NOT block any air ventilation slots. All fan and air inlets must remain clean and never blocked. Allow approx. 6” (15cm) between fixture and other devices or a wall for proper cooling.
- When installing fixture in a suspended environment, always use mounting hardware that is no less than M10 x 25 mm, and always install fixture with an appropriately rated safety cable.
- Always disconnect fixture from main power source before performing any type of service and/or cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the wire portion of the cord.
- During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time.
- Consistent operational breaks will ensure the fixture will function properly for many years to come.
- Use the original packaging and materials to transport the fixture in for service.
OVERVIEW
INSTALLATION
FLAMMABLE MATERI AL WARNI NG
Keep fixture at least 5.0 ft (1.5m) away from any flammable materials, decorations, pyrotechnics, etc.
ELECTRI CAL CONNECTI ONS
A qualified electrician should be used for all electrical connections and/or installations.
CAUTION
- For added protection, mount the fixture in areas outside walking paths, seating areas, or in areas were unauthorized personnel might reach the fixture.
- Ambient operating temperature range for this fixture is 5° to 113°F. (-15° to 45°C) Do not use the fixture under or above this temperature.
- Before mounting the fixture to any surface, make sure the installation area can hold a minimum point load of 10 times the weight of the fixture.
- Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
- Never stand directly below the device when mounting, removing or servicing.
CLAMP INSTALLATION
The fixture provides a unique mounting assembly (Omega Bracket) that attaches to the bottom of the base. (See the illustration below). When mounting this fixture to truss be sure to secure an appropriately rated clamp to the included Omega Bracket using a M10 screw fitted through the center hole of the Omega Bracket. Be sure to attach an appropriate Safety Cable (not included) to the fixture using the safety cable rigging point integrated in the base assembly.
OMEGA BRACKET INSTALLATION
Insert the Omega Bracket into the matching holes on the bottom of the fixture. Secure the Omega Bracket to the fixture by turning each quick-lock fastener ¼ turn clockwise; making sure the fastener is completely locked.
RIGGING
Overhead rigging requires extensive experience, including amongst others calculating working load limits, installation material being used, and periodic safety inspection of all installation material and the fixture. If you lack these qualifications, do not attempt the installation yourself. Improper installation can result in bodily injury. Fixture is fully operational in the specific mounting positions illustrated below.
SAFETY CABLE
ALWAYS USE A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT DROP IF THE CLAMP FAILS.
POWER LINKING
Max number of FUZE WASH Z120 IP™ units power linked together: 6 units @120V | 12 units @240V
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES TO FUZE WASH Z120™!
POWER CONSUMPTION OF OTHER LIGHTING FIXTURES WILL VARY!
ALWAYS CHECK MAX AMP OUT RATING PRINTED ON THE REAR CONNECTION PANEL!
OPTI ONA LS NOOT INSTALLAT ION
- Place fixture on a flat surface and make sure it’s powered OFF.
- Insert Snoot into fixture head and secure using screws provided. (See image below) Make sure not to over tighten screws to prevent any issues.
The fixture comes with an easy to navigate system menu. The control panel (see image below) located on the front the fixture provides access to the main system menu and is where all necessary system adjustments are made to the fixture. During normal operation, pressing MODE button once will access the fixture’s main menu. Once in the main menu you can navigate through the different functions and access the sub-menus with the UP, DOWN, RIGHT, and LEFT buttons. Once you reach a field that requires adjusting, press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field. Pressing the ENTER button once more will confirm your setting. You may exit the main menu at any time without making any adjustments by pressing the MODE/ESC button.
NOTE: To access the LCD Menu Control Display via the internal battery, press and hold the DC SWITCH button for 3 seconds. The LCD Menu Control Display will shut OFF automatically about 1 minute from the last button press.
INFORMATION DISPLAYED DURING INITIAL POWER ON
When the fixture is initially powered ON, the display shows the following information:
ELATION© FUZE WASH Z120™ S Y S T E MM E N U |
||||
Features are subject to change without any prior written notice. | ||||
MAIN MENU | SUB MENU | OPTIONS / VALUES (Default Settings in BOLD) | DESCRIPTION | |
Receive | Set Address | 001 ~ XXX | DMX Address Setting | |
User Mode |
User Mode | 15CH RGBW, 16CH HSI, 17CH sRGBI,
19CH RGBW, | User A, User B, User C |
Set DMX Channel / User Mode | |
Edit A | Max. Chan
: Chase Fade |
Edit User Defined Channel Assignments | ||
Edit B | ||||
Edit C | ||||
Function |
Status |
Remote Add | ON/OFF | Set Fixture Address Via DMX Control |
NoDMX Mode | Blackout / Hold / Auto | Function If NO DMX Detected | ||
Pan Invert | ON / OFF | Pan Reverse Movement | ||
Tilt Invert | ON / OFF | Tilt Reverse Movement | ||
Pan Degree | 540 | Pan Degree Select | ||
Feedback | ON/OFF | Movement Feedback | ||
Move. Spd | Speed 1 ~ 4 | Movement Mode Select | ||
Stand By | OFF, 01M~99M, 15M | Stand By Mode | ||
Fan Set | Head Fan | Auto, High, Low | Head Fan Speed Set | |
LCD. Set |
Backlight | 02~60m 05m | LCD Backlight Shut Off Time | |
FlipDisplay | ON / OFF | Flip/Reverse LCD Display 180º | ||
Key Lock | ON / OFF | Control Front Panel Buttons Key Lock | ||
Disp Flash | ON / OFF | Display flashes when NO DMX | ||
Dim Curve | Standard, Stage, TV, Architectur, Theatre | Set Dimmer Curve Mode | ||
Temp. C/F | Celsius/Fahrenheit | Temperature Switch Between C˚/ F˚ | ||
Init. Effect | Pan, Pan Fine, Tilt… = XXX | Initial Effect Position | ||
Disp. Set |
Chan. Value |
Pan, Pan Fine,
Tilt, Tilt Fine, Move Sp, Strobe, Dimmer, Dimmer Fine, Red, Green, Blue, White, Zoom, Intensity, Color-MC, Hue, Saturation, Dim Modes, Chase, Chase Sp, Chase Fade |
Value of each Channel Displayed |
|
SEcd Set | SEcd 1, Secd 2, SEcd 3 | Set Secondary Mode Preset | ||
Auto.Pro | Primary/Alone | Set Auto Program Mode | ||
Frequency (Hz) | 900, 1000, 1100, 1200, 1300, 1400, 1500, 2500, 4000, 5000, 10k, 15k, 20k, 25k | Frequency Response | ||
Gamma | 2.0, 2.2, 2.4, 2.6, 2.8 | Gamma correction | ||
DFSE | ON / OFF | Restore Factory Settings | ||
CONTINUED ON NEXT PAGE |
ELATION© FUZE WASH Z120™ S Y S T E MM E N U |
||||
Features are subject to change without any prior written notice. | ||||
MAIN MENU | SUB MENU | OPTIONS / VALUES (Default Settings in BOLD) | DESCRIPTION | |
Information |
Time. Info |
Current | XXXX (Hours) | Fixture Run Time From Power ON |
Total Time | XXXX (Hours) | Fixture Total Run Time | ||
Last Clear | XXXX (Hours) | Clear Fixture Last Run Time | ||
Timer PIN | Enter PIN to Access Clear Last. Menu | |||
Clear Last | Password = 050 | Reset Fixture Last Run Time | ||
Clear Total | Password = 060 | Reset Total Fixture Run Time | ||
Temp. Info | Head Temp. | Temperature in Fixture Head | ||
Error Info | Error Record 1 ~ Error Record 10 | Display 10 Recent Error Messages | ||
Model. Info | Fuze Wash Z120 | Display Model Name | ||
Software Version | 1.16 | Display current software
version |
||
Test |
Reset. M | Reset of Pan/Tilt Motors | ||
Test. Chan |
Pan, Pan Fine, Tilt, Tilt Fine, Move Sp, Strobe, Dimmer, Dimmer Fine, Red, Green, Blue, White, Zoom, Intensity, Color-MC, Hue, Saturation, Dim Modes, Chase, Chase Sp,
Chase Fade |
Test Functions |
||
Panel. Ctrl | PAN=XXX… | Fine Adjustments | ||
Calibrate | Password | Password= 050 | Calibration of Motors and LEDs | |
Program |
Select. Pro |
Auto Pro Part1 = Program 1~9 (Program 1) |
Select Programs To Be Run |
|
Auto Pro Part2 = Program 1~9 (Program 2) | ||||
Auto Pro Part3 = Program 1~9 (Program 3) | ||||
Edit. Pro |
Program 1 | Program Test Step 01-64 |
Testing Program | |
… | … | Program In Loop | ||
Program 9 | Program Test Step 01-64 |
Save and Exit | ||
Edit Sce. |
Edit Scene 001 | Pan, Tilt, … | ||
~Edit Scene 250 | Fade Time | |||
Scene Time | ||||
Input By Outside | ||||
Sce. Input | XX~XX | Scene Input |
Function – Status – Remote Add
When ON, define the desired DMX address of fixture via an external controller.
- Connect the fixture to the external controller and power ON.
- Set the DMX value of Channel 1 on the controller to (7).
- Set the DMX value of Channel 2 on the controller to (7) or (8).
When set to (7), the DMX address can be set between (1) and (255).
When set to (8), the DMX address can be set between (256) and (511). - Using Channel 3 on the controller set the desired DMX address of the fixture. Example 1:
If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2 to a value of (7), and then set Channel 3 to a value of (57).
Example 2:
If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel 2 to a value of (8), and then set Channel 3 to a value of (164). (256+164=420) - After setting Channel 3 to the desired DMX address value, wait for approximately 20 seconds for the fixture to complete the address reset function.
Function – Dim Curve
Select desired DIMMER MODE (Standard, Stage, TV, Architectural, Theatre).
Test – Calibrate
ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION
This function allows small adjustments to be made to the effect wheels to compensate for ware or in the event a sensor has been knocked slightly out of place. Because improper use of this function can result in undesired operation this function has been password protected. The password is 050 and must be entered each time the calibration menu function is entered. Because calibration is an extremely delicate procedure, instructions on performing this action are left out of this manual. For a first-time calibrator, please contact our customer support team for step-by-step instructions.
DMX CHANNEL FUNCTIONS AND VALUES
ELATION© FUZE WASH Z120™ DMX Channel Values / Functions Version (19 DMX Channels) |
||||||||||
Supports Software Versions: ≥ 1.15 | ||||||||||
Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. |
||||||||||
MODE / CHANNEL | VALUE | FUNCTION | ||||||||
15 RGBW | 16 HSI | 17 RGBI | 19 RGBW | |||||||
1 |
1 |
1 |
1 |
PAN MOVEMENT [8 BIT] | ||||||
0-255 | PAN Movement 630/540 | |||||||||
2 |
2 |
2 |
2 |
PAN FINE MOVEMENT [16 BIT] | ||||||
0-255 | Fine Control of PAN Movement | |||||||||
3 |
3 |
3 |
3 |
TILT MOVEMENT [8 BIT] | ||||||
0-255 | TILT Movement | |||||||||
4 |
4 |
4 |
4 |
TILT FINE MOVEMENT [16 BIT] | ||||||
0-255 | Fine Control of TILT Movement | |||||||||
5 |
5 |
RED | ||||||||
0-255 | 0 to 100% | |||||||||
6 |
6 |
GREEN | ||||||||
0-255 | 0 to 100% | |||||||||
7 |
7 |
BLUE | ||||||||
0-255 | 0 to 100% | |||||||||
8 |
8 |
WHITE | ||||||||
0-255 | 0 to 100% | |||||||||
9 |
5 |
5 |
10 |
SHUTTER / STROBE | ||||||
0-31 | LED OFF | |||||||||
32-63 | LED ON | |||||||||
64-95 | Strobe Effect SLOW to FAST | |||||||||
96-127 | LED ON | |||||||||
128-159 | Pulse Effect in Sequences | |||||||||
160-191 | LED ON | |||||||||
192-223 | Random Strobe Effect SLOW to FAST | |||||||||
224-255 | LED ON | |||||||||
6 |
RED | |||||||||
0-255 | 0 to 100% | |||||||||
7 |
GREEN | |||||||||
0-255 | 0 to 100% | |||||||||
8 |
BLUE | |||||||||
0-255 | 0 to 100% | |||||||||
6 |
HUE | |||||||||
0-255 | 0-100% | |||||||||
7 |
SATURATION | |||||||||
0-255 | 0-100% | |||||||||
8 |
9 |
INTENSITY | ||||||||
0-255 | 0-100% | |||||||||
ELATION© FUZE WASH Z120™ DMX Channel Values / Functions Version (19 DMX Channels) |
||||||||||
Supports Software Versions: ≥ 1.15 | ||||||||||
Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. |
||||||||||
MODE / CHANNEL | VALUE | FUNCTION | ||||||||
15 RGBW | 16 HSI | 17 RGBI | 19 RGBW | |||||||
9 |
10 |
9 |
COLOR PRESETS | |||||||
0 | No function | |||||||||
1-255 | See Color Macros Chart | |||||||||
10 |
11 |
DIMMER INTENSITY | ||||||||
0-255 | Dimmer 0 to 100% | |||||||||
11 |
12 |
DIMMER INTENSITY FINE | ||||||||
0-255 | Dimmer FINE Adjustment | |||||||||
12 |
10 |
11 |
13 |
ZOOM | ||||||
0-255 | Zoom 0% (5 Degrees) to 100% (50 Degrees) | |||||||||
11 |
12 |
14 |
PROGRAM MACROS | |||||||
0 | NO FUNCTION | |||||||||
1-20 | Auto Program 1 | |||||||||
21-40 | Auto Program 2 | |||||||||
41-60 | Auto Program 3 | |||||||||
61-80 | Auto Program 4 | |||||||||
81-100 | Auto Program 5 | |||||||||
101-120 | Auto Program 6 | |||||||||
121-140 | Auto Program 7 | |||||||||
141-160 | Auto Program 8 | |||||||||
161-180 | Auto Program 9 | |||||||||
181-200 | Auto Program 10 | |||||||||
201-220 | Auto Program 11 | |||||||||
221-240 | Auto Program 12 | |||||||||
241-250 | Auto Program 13 | |||||||||
251-255 | Gradient Effect | |||||||||
12 |
13 |
15 |
AUTO PROGRAM SPEED | |||||||
0-255 | Slow to Fast | |||||||||
13 |
14 |
16 |
AUTO PROGRAM FADE | |||||||
0-255 | 0-100% | |||||||||
13 |
14 |
15 |
17 |
DIMMING MODES | ||||||
0-20 | STANDARD | |||||||||
21-40 | STAGE | |||||||||
41-60 | TV | |||||||||
61-80 | ARCHITECTURAL | |||||||||
81-100 | THEATRE | |||||||||
101-255 | Default to Unit Setting | |||||||||
CONTINUED ON NEXT PAGE | ||||||||||
ELATION© FUZE WASH Z120™ DMX Channel Values / Functions Version (19 DMX Channels) |
||||||||||
Supports Software Versions: ≥ 1.15 | ||||||||||
Features are subject to change without any prior written notice. *Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings. |
||||||||||
MODE / CHANNEL | VALUE | FUNCTION | ||||||||
15 RGBW | 16 HSI | 17 RGBI | 19 RGBW | |||||||
14 |
15 |
16 |
18 |
PAN / TILT MOVEMENT SPEED | ||||||
0-225 | MAX to MIN SPEED | |||||||||
226-235 | Blackout By Movement | |||||||||
236-255 | NO FUNCTION | |||||||||
15 |
16 |
17 |
19 |
LAMP ON/OFF, RESET, INTERNAL PROGRAMS | ||||||
0-10 | Normal (Default LED Refresh Rate = 1200 Hz) | |||||||||
11 | 900 Hz | |||||||||
12 | 910 Hz | |||||||||
13 | 920 Hz | |||||||||
14 | 930 Hz | |||||||||
15 | 940 Hz | |||||||||
16 | 950 Hz | |||||||||
17 | 960 Hz | |||||||||
18 | 970 Hz | |||||||||
19 | 980 Hz | |||||||||
20 | 990 Hz | |||||||||
21 | 1000 Hz | |||||||||
22 | 1010 Hz | |||||||||
23 | 1020 Hz | |||||||||
24 | 1030 Hz | |||||||||
25 | 1040 Hz | |||||||||
26 | 1050 Hz | |||||||||
27 | 1060 Hz | |||||||||
28 | 1070 Hz | |||||||||
29 | 1080 Hz | |||||||||
30 | 1090 Hz | |||||||||
31 | 1100 Hz | |||||||||
32 | 1110 Hz | |||||||||
33 | 1120 Hz | |||||||||
34 | 1130 Hz | |||||||||
35 | 1140 Hz | |||||||||
36 | 1150 Hz | |||||||||
37 | 1160 Hz | |||||||||
38 | 1170 Hz | |||||||||
39 | 1180 Hz | |||||||||
40 | 1190 Hz | |||||||||
41 | 1210 Hz | |||||||||
42 | 1220 Hz | |||||||||
43 | 1230 Hz | |||||||||
44 | 1240 Hz | |||||||||
45 | 1250 Hz | |||||||||
CONTINUED ON NEXT PAGE | ||||||||||
ERROR CODES
When power is applied, the unit will automatically enter a “Motor Reset” mode, which brings all the internal motors to a home position. If there is an internal problem with one or more of the motors, an error code (see below) will flash on the control display.
ERROR CODE | DESCRIPTION |
TILT Er | The TILT movement is not located in the default position after the reset. This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or there is a motor failure (defective motor or defective motor IC drive on main PCB). This error may also be displayed if the head was blocked during a reset function |
PAN Er | The PAN movement is not located in the default position after the reset. This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or there is a motor failure (defective motor or a defective motor IC drive on the main PCB). This error may also be displayed if the head/yoke was blocked during a reset function. |
ZOOM Er | The ZOOM movement is not located in the default position after the reset. This message will appear after a fixture reset if the magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or there is a motor failure (defective motor or a defective motor IC drive on the main PCB). This error may also be displayed if the head/yoke was blocked during a reset function. |
CLEANING AND MAINTENANCE
CLEANING
Frequent cleaning is recommended to insure proper function, optimized light output, and an extended life. The frequency of cleaning depends on the environment in which the fixture operates: damp, smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture’s optics.
- Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt/debris accumulation.
- Never use alcohol, solvents, or ammonia based cleaners.
MAINTENANCE
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer.
Please refer to the following points during routine inspections:
- A detailed electric check by an approved electrical engineer every three months, to make sure the circuit contacts are in good condition and prevent overheating.
- Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall.
- Check for any deformations on the housing, color lenses, rigging hardware and rigging points (ceiling, suspension, trussing). Deformations in the housing could allow for dust to enter into the fixture. Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person(s).
- Electric power supply cables must not show any damage, material fatigue or sediments. Never remove the ground prong from the power cable.
TECHNICAL SPECIFICATIONS
SOURCE
120W RGBW COB LEDs
100,000 Hour Average LED Life*
*May vary depending on several factors including but not limited to:
Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
COLOR
RGBW
EFFECTS
RGBW Color Mixing
Motorized Zoom
Electronic Strobe, Dimming and Variable Dimming Curves
64 Color Presets and 14 Unique Color Macros
Pan Angle: 540/630
Tilt Angle: 250
CONTROL / CONNECTIONS
4 DMX Channel Modes (19 Total Channels)
7 Button Control Panel and LCD Menu Display
RDM (Remote Device Management)
3pin/5pin DMX and Power In/Out
SIZE / WEIGHT
Length: 13.3″ (338mm)
Width: 9.0″ (229mm)
Vertical Height: 18.2″ (466mm)
Weight: 22 lbs. (10 kg)
ELECTRICAL / THERMAL
AC 100-240V – 50/60Hz
157W Max Power Consumption 5F to 113°F (-15°C to 45°C)
BTU/hr (+/- 10%) 535.37
APPROVALS / RATINGS
CE | IP30 |
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
DIMENSIONAL DRAWINGS
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
DIMENSIONAL DRAWINGS – Optional Snoot Installed
Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
OPTIONAL ACCESSORIES
ORDER CODE | ITEM |
FW120SNOOT | FUZE WASH Z120 Snoot |
TRIGGER CLAMP | Heavy Duty Wrap Around Hook Style Clamp |
DRC120FUZE | FUZE WASH Z120 Quad Road Case |
AC3PDMX5PRO | 5 ft. (1.5m) 3pin PRO DMX Cable |
AC5PDMX5PRO | 5 ft. (1.5m) 5pin PRO DMX Cable |
PLC3 | 3 ft. (1m) Locking Power Cable |
Additional Cable Lengths Available |
Documents / Resources
ELATION PROFESSIONAL Z120 LED Fuze Wash [pdf] User Manual PROFESSIONAL Z120 LED Fuze Wash, PROFESSIONAL Z120, LED Fuze Wash, Fuze Wash, Wash |
References
- EnCirca FORWARD Domain page
- Elation Professional - Professional Lighting Products
- Search results for: 'Login aspx'
- Elation Professional EUROPE - Professional Lighting Products
- User Manual