ANGELES HOME 69542-8CK-HW Heavy Duty Foldable Memory Foam Bed with Mattress 

ANGELES HOME 69542-8CK-HW Heavy Duty Foldable Memory Foam Bed with Mattress

Before You Start

Symbol Please read all instructions carefully.
Symbol Retain instructions for future reference.
Symbol Separate and count all parts and hardware.
Symbol Read through each step carefully and follow the proper order.
Symbol We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Symbol Always place the product on a flat, steady and stable surface.
Symbol Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

PRECAUTIONS

WARNING

Read the following information before using this product. Failure to adhere to these terms and precautions could compromise safety, cause product malfunction.

SMALL CHILDREN AND PETS:

Immediately dispose of all packing materials as they can smother, choke, or otherwise harm small children and pets. Do not allow any person or pets under the bed.
Children, convalescents, and disabled persons should not operate the bed without adult supervision.

WEIGHT LIMITS:

The limitation for this product is 640 lbs. This product will structurally support up to 640lbs, provided the mattress is evenly distributed across the product and the weight isn’t concentrated in one area. Exceeding this weight restriction could damage the bed and/or cause injury.

ALWAYS read and follow the instructions before use.

PARTS LIST

  • Bed Frame x1
    Parts List
  • Wheels Component x2
    Parts List
  • Bolts-M8*35 x8
    Parts List
  • Nut-M8 x4
    Parts List
  • Wrench – S5 x1
    Parts List
  • Mattress Bars x2
    Parts List
  • Wrench-S13 x1
    Parts List
  • Pins-φ8*40 x4
    Parts List

ASSEMBLY

Step 1

Check and verify all parts are included before discarding any packing materials. All components that need to be installed are located in boxes or attached to the frame.

Step 2

Remove all components from the carton and fold out the bed frame by swinging out the bottom legs as shown in the figure below. Install the two wheels component to the middle legs of the frame by using the Wrench-S5 to screw the blots into the frame underneath at each corner (see figure III ).
Assembly

Step 3

Once your frame is open as shown in the figure below.

  1. Lock the outer legs in place with the braces at each corner by rotating each brace toward each leg. Each brace will lock once you push it onto the blot at the side of each leg and screw the nuts(see figure I ).
  2. Insert the Pins φ8*40 in each frame hinge (see figure II ).
  3. Once the frame is secure, install the mattress bars at the head and foot of the frame with the bolts and nuts by using the wrench as shown. (see figure IV).
    Assembly

Step 4

Ready for the mattress to be rolled out on top. Your bed is complete! ENJOY.

When finished, simply fold the ends of the bed and the mattress together and use the supplied buckle at the ends of the mattress bars to lock it closed before wheeling the folded bed into storage.
Unlock the outer legs from the braces at each corner by rotating each brace outwards away from each leg.
If the bed will not fit in your available space, simply reverse the assembly process to fold the frame and gain extra compactness

Documents / Resources

ANGELES HOME 69542-8CK-HW Heavy Duty Foldable Memory Foam Bed with Mattress [pdf] User Manual
69542-8CK-HW Heavy Duty Foldable Memory Foam Bed with Mattress, 69542-8CK-HW, Heavy Duty Foldable Memory Foam Bed with Mattress, Foam Bed with Mattress, Mattress

References

Leave a comment

Your email address will not be published. Required fields are marked *