SAFAVIEH CHA4021A Chandeliers Lighting Fixture A0

Model#:CHA4021A
Product Dimensions:21.5″x21.5″x26.5″-56.5″

SAFAVIEH CHA4021A Chandeliers Lighting Fixture A0

WARNING

** WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN **
* Switch off the main electrical supply from the main fuse box / circuit breaker before installation.
* Inspect item carefully before attempting to install.
* If there is any damages or obvious defects, do not install.
* Item may not be returned once it has been installed.

CARE AND MAINTENANCE

* To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
* To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
* Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed

Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY

A

Mounting Plate SAFAVIEH Part & Hardware List A1 1X
B Wire Nut SAFAVIEH Part & Hardware List A2

3X

C

Mounting Screw Size :8/32* 30mm SAFAVIEH Part & Hardware List A3 2X
D1/D2 Canopy Swivel SAFAVIEH Part & Hardware List A4

1X

E

Canopy Nut SAFAVIEH Part & Hardware List A5 2X
F Short tube SAFAVIEH Part & Hardware List A6

2X

G

Long tube SAFAVIEH Part & Hardware List A7 2X
H Lower tube SAFAVIEH Part & Hardware List A8

1X

J

Shade SAFAVIEH Part & Hardware List A9 1X
K Bulb SAFAVIEH Part & Hardware List A10

3X

L

Threaded tube SAFAVIEH Part & Hardware List A11 1X
M Plastic washer SAFAVIEH Part & Hardware List A12

2X

N

Diffuser SAFAVIEH Part & Hardware List A13 1X
O Hex Nut SAFAVIEH Part & Hardware List A14

1X

P

Metal Cover SAFAVIEH Part & Hardware List A15 1X
Q Finial SAFAVIEH Part & Hardware List A16

1X

PREPARATION

* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time:30 minutes
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
NOTE:PLEASUE USE TYPE”A” BULB MAX 40-WATT OR CFL MAX 13-WATT OR LED MAX 9W,THERE ARE 3*9W LED BULBS IN THE BOX.

SAFAVIEH CHA4021A Chandeliers Lighting Fixture A1

Step 1:Unpack all parts from cartons carefully. Separate the Mounting Plate(A) from the Canopy(D1) by removing the Canopy Nut(E) anti-clockwise.

 SAFAVIEH CHA4021A Chandeliers Lighting Fixture A2

Step 2:Insert the power cord through Lower tube (H), Short tube (F) and Long tube (G) as desired length. Insert the Lower tube (H) into the center threaded portion (I) of the Shade(J) until tight. Rotate each tubes clockwise till tight.

 SAFAVIEH CHA4021A Chandeliers Lighting Fixture A3

Step 3:Insert the Long tube(G) into the thread portion of the Swivel (D2) and the Canopy(D1), then cut off the extra cord so that 6″ wires at least long within the outlet junction box.

SAFAVIEH CHA4021A Chandeliers Lighting Fixture A4

Step 4:Attach the Mounting Plate (A) to the ceiling junction box and secure it by tightening 2 Mounting Screws (C) with a screwdriver until secure.

SAFAVIEH CHA4021A Chandeliers Lighting Fixture A5a SAFAVIEH CHA4021A Chandeliers Lighting Fixture A5b

Step 5: Wire connection
Connect fixture neutral wire (ribbed) to the outlet box neutral wire (usually white) using a wire nut. Connect fixture hot wire (smooth with markings) to the outlet box hot wire (usually black) using a wire nut. CAUTION: Do not reverse the hot and neutral connections

Grounding Instructions:
Wrap ground wire from outlet box around green ground screw(B) on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

SAFAVIEH CHA4021A Chandeliers Lighting Fixture A6

Step 6:Raise the Canopy (D1) over the Mounting Plate (A),making sure 2 Threaded Rods extend downwards through 2 holes on the Canopy (D1). Secure the Canopy (D1) by turning the Canopy Nuts (E) clockwise until tight.

SAFAVIEH CHA4021A Chandeliers Lighting Fixture A7

Step 7:Insert the bulbs(K) into the sockets until secure.DO NOT EXCEED THE SPECIFIED WATTAGE. Insert the Threaded tube (L) into the tube of the sockets assembly of Shade (J). Position 1 Plastic washer (M), then place the Diffuser (N) onto the threaed tube. Place another Plastic washer (M),fix it by turning the Hex Nut (O) clockwise till tight. Place the Metal Cover (P) through the theaded tube, fix the Metal Cover (P) in place by turning the Finial (Q) clockwise till tight.
Adjust the Swivel (D2) if the assembled lamp body is not streight.

Documents / Resources

SAFAVIEH CHA4021A Chandeliers Lighting Fixture [pdf] Instruction Manual
CHA4021A Chandeliers Lighting Fixture, CHA4021A, Chandeliers Lighting Fixture, Lighting Fixture, Fixture

References

Leave a comment

Your email address will not be published. Required fields are marked *