Style AP
Installation Guide
STYLE AP 3000K E Style LED Outdoor Wall Lamp
REV 23/10/2023
FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION.
QUALIFICATO. THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.
Non-replaceable light source: at the end of its life, the lamp must be disposed.This product is provided with a light source with efficiency energy class of:
EAN | Light Source Model | Energy Efficiency Class | Light Source (mA) | Light Source (V) |
8021696246857 | STYLE AP 3000K | E | 110 mA | 72 V DC |
8021696209845 | STYLE AP 4000K | E | 110 mA | 72 V DC |
8021696269139 | STYLE AP 3000K | E | 110 mA | 72 V DC |
8021696221502 | STYLE AP 4000K | E | 110 mA | 72 V DC |
8021696322704 | STYLE AP 3000K | E | 110 mA | 72 V DC |
8021696322681 | STYLE AP 4000K | E | 110 mA | 72 V DC |
8021696322650 | STYLE AP 3000K | E | 110 mA | 72 V DC |
8021696322643 | STYLE AP 4000K | E | 110 mA | 72 V DC |
8021696322636 | STYLE AP 3000K | E | 110 mA | 72 V DC |
8021696322629 | STYLE AP 4000K | E | 110 mA | 72 V DC |
LEGENDA ICONE
Replaceable light source by an end-user. | |
Replaceable LED light source by an end-user. | |
Replaceable light source by authorized personnel only. | |
Non-replaceable light source. Upon end of life of the light source, the whole product will be replaced. |
|
Replaceable control gear by an end-user. | |
Replaceable light source by authorized personnel only. | |
Upon end of life of the control gear, the whole product will be replaced. |
SAFETY INSTRUCTIONS
REV 07/01/19
- This fitting is produced and tested in accordance with the strictest European safety standards (EN 60.598-1).
- This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
- As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
- If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
- Always isolate power before commencing installation, maintenance or repair.
- The luminaire contains certain parts which can be very hot.
- Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
- Always tighten the screws firmly to avoid contact problems.
- This fitting should only be installed indoors.
- Luminaires not suitable for recessed on normally flammable surfaces.
- Luminaire not suitable for direct mounting on normal flammable surfaces.
- This fitting is only suitable for fixing to the ceiling.
- This fitting is only suitable for fixing to the wall.
- The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
- Only use lamps which do not exceed the maximum specified wattage.
- Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed.
- Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing.
- Cracked or broken safety glass has to be replaced immediately. Use only manufcturer approved parts complying with regulations.
- Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents.
- This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
- Class I Electrical safety guaranteed by the main insulation and an additional protective conduc- tor (earthing) connected with the metal frame of the lamp. Earthing is obligatory.
- Class II Electrical safety guaranteed by the main insulation and a double or reinforced insulation. Earthing not necessary.
- Class III Electrical safety guaranteed by very low power supply (less than 50 Volt). Earthing excluded.
- Not protected.
- Protected against solid objects greater than 50 mm.
- Protected against solid objects greater than 12 mm.
- Protected against solid objects greater than 2,5 mm.
- Protected against solid objects greater than 1mm.
- Dust protected.
- Totally protected against dust infiltration.
- Not protected.
- Protected against vertically falling water drops.
- Protected against water drops falling with a maximum angle of 15° to the vertical axis.
- Protected against rain.
- Protected against splashing water.
- Protected against water jets.
- Protected against strong water jets.
- Protected against temporary immersion.
- Protected against prolonged immersion.
- Luminaire not suitable for covering with thermally insulating material.
- Caution, risk of electric shock.
- Do not stare at the operating light source.
IDEAL LUX s.r.l.
Via Taglio Destro 32
30035 Mirano (VE) Italy
www.ideal-lux.com
IDEAL LUX Warehouse
Via delle Industrie, 8/D
30036 Santa Maria di Sala (Venezia)
8.00 – 12.00 / 13.30 – 17.00
Documents / Resources
ideal lux STYLE AP 3000K E Style LED Outdoor Wall Lamp [pdf] Installation Guide STYLE AP 3000K E, STYLE AP 4000K E, STYLE AP 3000K E Style LED Outdoor Wall Lamp, Style LED Outdoor Wall Lamp, LED Outdoor Wall Lamp, Outdoor Wall Lamp, Wall Lamp, Lamp |