bouncepad FBR-W1-M4-MN Floorstanding with Brother Printer Mount Tablet Security Enclosure
Product Specifications
- Product Name: Floorstanding with Brother Printer Mount
- Manufacturer: Spotspot Ltd. (T/A Bouncepad)
- Release Date: 26/03/2024
- Copyright: 2016 Spotspot Ltd. (T/A Bouncepad), all rights reserved
Product Usage Instructions
Assembly Instructions
- Socket Driver
- 10mm Spanner or adjustable spanner
- Pair of Keys
- T20 Pin Buttonhead Torx Driver Bit
- T10 Pin Torx Allen Key
- PZ3 Pozi Driver Bit
Assembly Steps
- Orientate, locate, and secure the Floorstanding Pole to the Floorstanding Base.
- Place the Floorstanding Cover over the Floorstanding Pole.
- Remove Neck-Ring using the T20 driver bit and Socket Driver.
- Feed the printer’s power cable through the Floorstanding Pole.
- Attach the printer to the Printer Mount using M3x10mm Screws.
- Feed power cable through Printer Mount and plug into Printer.
- Re-attach Neck-Ring.
- Pull the cable back to remove any slack near the Printer Mount.
- Locate and secure the Case onto the Mounting Arm. Tighten by hand.
- Unlock & remove the Faceplate from the Bouncepad Case.
- Feed the tablet power cable through the Case & Floorstanding Pole.
- Install the Tablet Setup Kit specific to your device & case.
- Install the tablet into the Case & connect to power.
- Lock the Faceplate to the Case.
- If using a battery pack, connect the tablet cable and place the pack into the Floorstanding Base.
- Place the Floorstanding Rubber Collar on the ground.
- Record key number for future key purchases.
- Installation is now complete.
Frequently Asked Questions (FAQ)
Q: What type of printer is compatible with the Brother Printer Mount?
- A: The Brother Printer Mount is designed for Brother QL-820WNB printers. Please note that the printer is not provided with the mount.
Q: Can I use electric tools for tightening screws during assembly?
- A: It is recommended to tighten screws using hand tools, as using electric tools may damage your Bouncepad.
Q: What type of battery pack is recommended for use with this product?
- A: The product is designed to support the Anker PowerCore 10000mAh battery pack, which is not provided with the product.
Floorstanding with Brother Printer Mount
Tools Required:
- Socket Driver
- 10mm Spanner *or adjustable spanner
- Sheet Code: BP-IM-057_REV2
- Release Date: 26/03/2024
- Copyright 2016 Spotspot Ltd. (T/A Bouncepad) all rights reserved.
- Confidential, no part of this publication may be reproduced or transmitted in any form without the written permission of the copyright holder.
Assembly Instructions
- Orientate, locate, and secure the Floorstanding Pole to the Floorstanding Base as shown. Ensure that all fixings are installed correctly.
- Locate the Floorstanding Cover over the Floorstanding Pole.
- Remove Neck-Ring using the T20 driver bit and Socket Driver
- Feed the printer’s power cable through the Floorstanding Pole
- Attach the printer to the Printer Mount using M3x10mm Screws
- Feed power cable through Printer Mount and plug into Printer
- Re-attach Neck-Ring
- Pull the cable back to remove any slack near the Printer Mount
- Locate and secure the Case onto the Mounting Arm as shown. Tighten by hand.
- Unlock & remove the Faceplate from the Bouncepad Case.
- Feed the tablet power cable through the Case & Floorstanding Pole.
- Install the Tablet Setup Kit. Each kit is specific per device & case.
- Install the tablet into the Case & connect to power.
- Locate and lock the Faceplate to the Case.
- Connect the tablet power cable to its main power source.
- If installing a battery pack, connect the tablet cable and locate the pack into the Floorstanding Base.
- With the Floorstanding Cover on the ground, locate and fit the Floorstanding Rubber Collar.
- Use a Kensington® Microsaver product to tether to a secure object. (refer to your Kensington® instructions for full details)
- Installation is now complete.
Documents / Resources
 |
bouncepad FBR-W1-M4-MN Floorstanding with Brother Printer Mount Tablet Security Enclosure [pdf] Instruction Manual FBR-W1-M4-MN Floorstanding with Brother Printer Mount Tablet Security Enclosure, FBR-W1-M4-MN, Floorstanding with Brother Printer Mount Tablet Security Enclosure, Brother Printer Mount Tablet Security Enclosure, Printer Mount Tablet Security Enclosure, Mount Tablet Security Enclosure, Tablet Security Enclosure, Security Enclosure |
