ENTRO LOGOA0500SSSM NARROW STILE MORTICE LOCK
Installation Instructions

A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras

HANDING OF DOOR

RIGHT-HAND DOOR LEFT-HAND DOOR
ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - HAND DOOR

IMPORTANT:
Before drilling door, ensure correct handing is being installed
NOTE:
Case does not need to be opened at any time to change function or handling of this lock

DOOR PREPARATION

METAL DOOR PREPARATION

  1. Determine the height of the lockset on the door
  2. Cut out the mortice window 156mm x 25.5mm with 3mm radius corners
  3. Place template in opening and drill 4.5mm holes, countersink with 8mm dia at 90°
  4. Drill other appropriate holes for the selected lockset.
    Dimensions in the illustration suit a 30mm backset lock
  5. Do not drill holes all the way through to avoid door damage or incorrect installation

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - DOOR PREPARATION

NOTE: Ensure door furniture supplied match the correct hole dimensions being drilled.

LOCK PREPARATION

CHECK LOCK STATUS
Ensure that the locking bar is in the unlocked position (UP). If position needs to be changed to the unlock position, use a small flat blade screwdriver, to lever out plastic cylinder hole plug (where fitted) and lift locking bar using the screwdriver.ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - CHECK LOCK STATUS

LOCK FUNCTIONS
Depending on the locking function required it can be set to any vestibule or combination lock status. To change the locking function, use a small flat blade screwdriver to rotate (AntiClockwise Only) the locking wedge to desired location. Refer to the Locking Status label on the lock body for further detail.

LOCKING STATUS
Locking bar must be UP (unlocked) to change

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - ICON Both Side Lockable
(Warning! Not suitable for Escape Doors)
ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - ICON1 This Side Locking
(Left Hand Doors)
ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - ICON2 Other Side Locking
(Right Hand Doors)
ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - ICON3 Rotate AntiClockwise Only

REVERSE BOLT HEAD FOR HANDING
Determine lock handing from the Handing of Door chart. Rotate bolt head if required by removing Face Plate to pull and rotate the bolt 180° to suit the Latching direction.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - REVERSE BOLT

TURN ADAPTOR INSTALLATION
ENTRO turn adaptors are captive adaptors and must be installed correctly for proper lock operation.

  1. Determine handing for adaptor
  2. Put lock into LOCKED STATUS by moving locking bar in down position.
  3. Insert adaptor ensuring the cam plate is engaged with the locking bar.
  4. Insert retaining pin and test operation, ensuring the locking bar is operating up & down with operation of cam (Maximum ¼ turn left or right).
  5. Lock can now be left in UNLOCKED STATUS with lock bar UP until installed on door.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - INSTALLATION

LOCK INSTALLATION

FIT LOCK
Insert Lock into door and secure with 2 screws.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - FIT LOCK

LOCKS WITH CYLINDERS

  1. screwdriver, lever out Using a small flat the cylinder hole plug, where fitted. Insert lock into door and secure with 2 screws.
  2. Secure cylinder with retainer pin, ensuring pin is flush with front face or lock.
  3. Install face plate and secure with 2 screws.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - WITH CYLINDERS

LOCK WITHOUT CYLINDER
Install face plate and secure with 2 screws.

LOCKS WITH TURNSNIB
Mark and cut the connecting bar as shown.
The turnsnib must be in the vertical position when unlocked.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - WITH TURNSNIB

LOCKS FOR DOOR LEVERS WITH SPINDLES
Insert spindle/s into lock as required, ensuring the spindle spring is attached to the rear of the spindle before assembling.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - WITH SPINDLES

DOOR FURNITURE INSTALLATION

FIT FURNITURE
Rotate handle to the desired handing as shown. Ensure furniture screws are minimum 5mm and maximum 15mm past the door face. Position furniture plates and secure with mounting screws.ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - FIT FURNITURE

FIT MOUNTING STRIKE

  1. Prepare doorjamb cutout and fit Strike Box to frame.
  2. Fit Strike to Strike Box and secure with 2 screws.

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras - FIT MOUNTING STRIKE

A0500SSSM NARROW STILE MORTICE LOCK
Installation Instructions
www.entro.com.au

Documents / Resources

ENTRO A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras [pdf] Instruction Manual
A0500SSSM NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras, A0500SSSM, NEEWER Z1 Round Head Flash Speedlite For Canon Dslr Cameras, Speedlite For Canon Dslr Cameras, Dslr Cameras

References

Leave a comment

Your email address will not be published. Required fields are marked *