BURY QZ9-SCB SCB Wireless Charger with NFC
Product Information
Specifications:
- FCC Compliance: Part 15 of FCC Rules
- ISED Compliance: Licence-exempt RSS(s)
- Radiation Exposure Limits: Compliant with FCC and IC standards
- Distance Requirement: Minimum 1.1 mm between radiator and body
- Model: SCB (Single Koppelantenne Lite)
- FCC ID: QZ9-SCB
- IC: 5927A-SCB
- HVIN: SCB
- PMN: SCB
Product Usage Instructions
Installation:
- Ensure the device is placed in an uncontrolled environment.
- Maintain a minimum distance of 1.1 mm between the device’s radiator and your body during operation.
- Avoid co-locating the transmitter with any other antenna or transmitter.
Operation:
- Ensure the device is not causing harmful interference.
- Accept any interference received, including that which may cause undesired operation.
FAQ:
- Q: What should I do if the device is not functioning properly?
A: If you encounter issues with the device’s operation, ensure that it is installed in compliance with the specified distance requirements and environmental conditions. Refer to the user manual for troubleshooting steps or contact customer support for assistance. - Q: Can I operate this device near other transmitting equipment?
A: It is recommended to maintain a minimum distance between this device and any other transmitting equipment to avoid interference. Do not co-locate this transmitter with other antennas or transmitters for optimal performance.
Approval and declaration of conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance void the user’s authority to operate this equipment.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 1.1 mm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 1,1 mm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- FCC ID: QZ9-SCB
- IC: 5927A-SCB
- HVIN: SCB, SCB (Single Koppelantenne Lite)
- PMN: SCB
Qi Standard
- The Qi standard enables wireless charging of suitable Qi-certified cell phones. To find out whether a cell phone supports the Qi standard, see the cell phone operating instructions. An overview of Qi-certified cell phones can be viewed under the following external link of the Wireless Power Consortium, Inc.: https://www.wire/esspowerconsortium.com/products
- Volkswagen AG assumes no liability for the completeness and accuracy of this list. The manufacturer of the cell phone may provide additional compatibility information.
- Cell phones that are not Qi-certified may be subject to limitations about wireless charging.
- The Qi symbol @ is displayed in the Infotainment system to indicate the status of wireless charging.
Wireless Cell Phone Charging
Requirements
A suitable cell phone that is no larger than the designated rear shelf and is Qi-certified.
- Remove any foreign objects from the storage compartment before charging → A.
- Remove the protective case of the cell phone and any other foreign objects (if present), then place the cell phone flat against the rear shelf with the display facing upward. The charging process starts automatically.
- Refer to the operating instructions for the cell phone.
The Infotainment system informs you when the charging process is starting and, if applicable if there are any foreign objects with metal components in the storage compartment.
Depending on the vehicle equipment, the charging function can be deactivated manually in the Infotainment system.
Meaning of the Qi symbols
The white Qi symbol with the on and off switch symbol indicates that wireless charging is switched off.
The white Qi symbol indicates that the cell phone is charging.
The red Qi symbol indicates that wireless charging is not possible.
Tap the Qi symbol for an explanation of the status and, if necessary, to switch on wireless charging.
Storage compartment cover
The storage compartment for the wireless charging function may have a cover for the cell phone display. The cover can prevent you from being distracted by the cell phone, e.g. by incoming notifications.
- Place the cell phone in the storage compartment.
- Keep the cover closed while driving so that the cell phone display is completely covered → A
WARNING
Notifications on the cell phone display may distract the driver. This can result in accidents and serious injury or death.
- Make sure that no objects interfere with the closing function of the cover.
- If the rear shelf includes a cover, always keep the cover closed while driving.
WARNING
Metal objects on the shelf can become very hot. This may cause burns or fires.
- Do not place metal objects or objects with metal components on the wireless charging shelf.
- Remove any foreign objects immediately.
NOTICE
- If cards or other objects with magnetic strips or with chips are placed on the rear shelf for wireless charging, the data stored on these may be damaged.
- Do not place any ID cards, debit cards, or credit cards with magnetic strips or chips on the wireless charging shelf.
Wireless charging function
- In the center console: storage for wireless charging function (general example).
- The wireless charging function depends on the vehicle equipment and is not available in all countries.
- Wireless charging enables wireless energy transfer through electromagnetic induction over a short distance for cell phones that are Qi-certified.
- The rear shelf with a liner mat for the wireless charging function is located in the area of the center console and is designed for only one Qi-certified mobile phone at a time → fig. 146.
- The charging capacity is 15 W.
Documents / Resources
 |
BURY QZ9-SCB SCB Wireless Charger with NFC [pdf] Instructions QZ9-SCB SCB Wireless Charger with NFC, QZ9-SCB, SCB Wireless Charger with NFC, Charger with NFC |
