LAZER ELITE Linear 6 Elite LED Lightbar
ELECTRICAL CONNECTION
BRANCHEMENT
Please disconnect the vehicle battery before installing or servicing your LED light installation. If in doubt, it is recommended to use the services of a professional installer. It is recommended to use the available corresponding Lazer wiring kit for your product. If utilizing existing (non Lazer) wiring, make sure to use appropriate wire gauge and fusing in line with your lights.
SUPERSEAL (3-PIN) / APTIV (3-PIN) | LINEAR-6 ELITE+ & LINEAR-18 ELITE+
BLACK WIRE: GROUND
RED WIRE: POSITIVE
GREY WIRE: LIGHT MODE SELECT
ECONOSEAL (2-PIN) / APTIV (2-PIN) + SUPERSEAL (3-PIN) | TRIPLE-R 1250 ELITE+ & TRIPLE-R 24 ELITE+
BLACK WIRE: GROUND
RED WIRE: POSITIVE
GREY WIRE: LIGHT MODE SELECT
GREEN WIRE: WHITE BACKLIGHT
BROWN WIRE: AMBER BACKLIGHT
FUNCTIONS
LES FONCTIONS
The Elite+ LED light bars can operate in 4 different lighting modes, with internal memory to recall the last selected mode:
- Boost (white only)
- Combo (white + yellow)
- Snow/Fog/Dust Mode (yellow only)
- E-mark/Low Output Mode (white only)
The different functions are selected by applying power to the corresponding Light Mode Selection wire on each lamp. It is recommended to install a momentary switch to facilitate selection of each different mode. Depressing such a switch for 2 seconds will cause the light to immediately activate the E-mark/Low Output Mode.
CANBUS INTEGRATION
INTEGRATION CANBUS
For vehicles where it is not possible to locate a 12V high beam signal, it will be necessary to take the high beam signal from the vehicle’s CAN system. For vehicle specific CAN instructions, please download the “CANM8 Connects” App.
SIDE MOUNTING INFORMATION
INFOS SUR LE MONTAGE
WARRANTY INFORMATION
INFORMATIONS DE GARANTIE
Your purchase of this Lazer Lamps product is an investment in a product designed and manufactured to the highest standards, but sometimes things can go wrong. You do not need to register your product with us, as we can trace the product through the unique serial number of the lamp. In the unlikely event of having to make a claim,please retain your purchase receipt and pass it back to the retailer from where you first purchased the product, at the point of raising any issue. We hope you enjoy your Lazer Lamps product, and wish you many years of a safer, more enjoyable night driving experience.
FITTING REGULATIONS
INSTRUCTIONS DE MONTAGE
Lamps with integrated Position light may need to be positioned according to the above sketch. If an additional pair of position lights is not permitted (e.g. in Switzerland, Austria), the position light should be disconnected. The legal regulations in individual countries must be observed.
ACCESSORIES
LES ACCESSOIRES DISPONIBLES
- BESPOKE GRILLE INTEGRATION KITS
- UNIVERSAL ROOF MOUNTING KITS
- ACCESSORIES & MOUNTS
- WIRING KITS AND CANBUS SYSTEMS
CUSTOMER SUPPORT
We appreciate your purchase of a Lazer Lamps product,
and value your feedback. If you would like to leave
feedback on your Lazer experience, please head to the
relevant product page on our website
www.lazerlamps.com.
WWW.LAZERLAMPS.COM
T +44 (0) 1992 677374
E sales@lazerlamps.com
Lazer Lamps Ltd, Calder House, Central Road
Harlow, Essex, CM20 2ST, UK
MADE IN THE UK
/LAZERLAMPS
Documents / Resources
 |
LAZER ELITE Linear 6 Elite LED Lightbar [pdf] Instructions ELITE Linear 6 Elite LED Lightbar, ELITE, Linear 6 Elite LED Lightbar, 6 Elite LED Lightbar, Elite LED Lightbar, LED Lightbar, Lightbar |
Lazerlamps: Superior LED Driving Lights - Made In UK 
