FCS-KM Straight Shaft Lawn Edger Attachment
STIHL FCS-KM
Instruction Manual
Original Instruction Manual
Contents
KombiSystem
2
Guide to Using this Manual
2
Safety Precautions and Working
Techniques
2
Using the Unit
6
Approved KombiEngines
8
Assembling the Unit
9
Mounting the KombiTool
10
Mounting the Cutting Blade
10
Starting / Stopping the Engine
11
Storing the Machine
12
Replacing the Depth Wheel
12
Replacing the Skirt
12
Replacing the Cutting Blade
13
Checking and Replacing the Wear
Guard
13
Maintenance and Care
14
Minimize Wear and Avoid Damage 15
Main Parts
16
Specifications
17
Maintenance and Repairs
18
Disposal
18
EC Declaration of Conformity
19
UKCA Declaration of Conformity 19
English
Dear Customer, Thank you for choosing a quality engineered STIHL product. It has been built using modern production techniques and comprehensive quality assurance. Every effort has been made to ensure your satisfaction and trouble-free use of the product. Please contact your dealer or our sales company if you have any queries concerning this product. Your
Dr. Nikolas Stihl
Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2021 0458-472-0121-D. VA0.H21. 0000009142_003_GB
FCS-KM
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems.
1
English
KombiSystem
In the STIHL KombiSystem a number of different KombiEngines and KombiTools can be combined to produce a power tool. In this instruction manual the functional unit formed by the KombiEngine and KombiTool is referred to as the power tool. Therefore, the separate instruction manuals for the KombiEngine and KombiTool should be used together for the power tool. Always read and and make sure you understand both instruction manuals before using your power tool for the first time and keep them in a safe place for future reference.
2
Guide to Using this Manual
Pictograms
All the pictograms attached to the machine are shown and explained in this manual.
Symbols in text
WARNING Warning where there is a risk of an accident or personal injury or serious damage to property.
NOTICE Caution where there is a risk of damaging the machine or its individual components.
Engineering improvements
STIHL’s philosophy is to continually improve all of its products. For this reason we may modify the design, engineering and appearance of our products periodically. Therefore, some changes, modifications and improvements may not be covered in this manual.
Safety Precautions and Working Techniques
Special safety precautions must be observed when working with this power edger because it has a sharp cutting blade that rotates at very high speed.
Always read and and make sure you understand both instruction manuals (KombiMotor and KombiTool) before using your power tool for the first time and keep them in a safe place for future reference. Nonobservance of the safety precautions may result in serious or even fatal injury.
Lend or rent your power tool only to persons who are familiar with this model and its operation do not lend your power tool without the KombiMotor and KombiTool instruction manuals.
Use the power edger only for cutting the edges of paths, flower beds and lawns.
Do not use your power tool for any other purpose because of the increased risk of accidents.
Only use blades and accessories that are explicitly approved for this power tool by STIHL or are technically identical. If you have any questions in this respect, consult a servicing dealer.
Use only high quality tools and accessories in order to avoid the risk of accidents and damage to the machine.
FCS-KM
STIHL recommends the use of genuine STIHL tools and accessories. They are specifically designed to match the product and meet your performance requirements.
The deflector on this power edger cannot protect the operator from all objects thrown by the cutting blade (stones, glass, wire, etc.). Such objects may ricochet and then hit the operator.
Never attempt to modify your machine in any way since this may increase the risk of personal injury. STIHL excludes all liability for personal injury and damage to property caused while using unauthorized attachments.
Do not use a pressure washer to clean your power tool. The solid jet of water may damage parts of the power tool.
Clothing and Equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow complete freedom of movement. Wear snug-fitting clothing, an overall and jacket combination, do not wear a work coat.
Avoid clothing that could get caught on branches or brush or moving parts of the machine. Do not wear a scarf, necktie or jewelry. Tie up long hair so that it is above shoulder level.
Wear steel-toed safety boots with non-slip soles.
WARNING
To reduce the risk of eye injuries, wear close-fitting safety glasses in accordance with European Standard EN 166. Make sure the safety glasses are a comfortable and snug fit. Wear hearing protection, e.g. earplugs or ear muffs. Wear a face shield and make sure it is a good fit. A face shield alone does not provide adequate eye protection.
Wear heavy-duty work gloves made of durable material (e.g. leather).
STIHL offers a comprehensive range of personal protective clothing and equipment.
English Transporting the Power Tool
Always shut off the engine. Carry the power tool properly balanced by the drive tube cutting blade in front of you. Do not touch hot parts of the machine since burn injury will result. Transporting by vehicle: Properly secure your power tool to prevent turnover, fuel spillage and damage.
002BA079 KN
FCS-KM
3
English
Before Starting
Check that your power tool is properly assembled and in good condition refer to appropriate chapters in the KombiMotor and KombiTool instruction manuals.
Blade correctly and securely mounted and in good condition (clean, move freely, not warped).
Inspect the deflectors for damage and wear. Do not operate the machine with a damaged deflector replace damaged parts.
Never attempt to modify the controls or safety devices work only with a properly mounted deflector.
Keep the handles dry and clean free from oil and dirt for safe control of the power tool.
Adjust the harness and handle(s) to suit your height and reach.
To reduce the risk of accidents, operate your power tool only if it is in a safe condition.
If you use a shoulder strap or full harness: Practice removing and putting down the machine as you would in an emergency. To avoid damage, do not throw the machine to the ground when practicing.
Holding and Controlling the Power Tool
Make sure you always have good balance and secure footing.
Always hold the power tool firmly with both hands on the handles.
Models with loop handle
On models with a loop handle and barrier bar, left hand on loop handle, right hand on control handle, even if you are left-handed. Models with bike handle
Right handle on control handle, left hand on left handle. During Operation In the event of impending danger or in an emergency, switch off the engine immediately by moving the slide control / stop switch / button to 0 or STOP.
15m (50ft)
002BA055 KN
002BA080 KN
The cutting attachment may catch and fling objects a great distance and cause injury – therefore, do not allow any other persons within a radius of 15 meters of your own position. To reduce the risk of damage to property, also maintain this distance from other objects (vehicles, windows). Even maintaining a distance of 15 meters or more cannot exclude the potential danger.
To reduce the risk of injury, avoid contact with the blade.
The correct engine idle speed is important to ensure that the blade stops moving when you let go of the throttle trigger. Check and correct the idle speed setting regularly. If the cutting blade still rotates when the engine is idling, have your dealer check your machine and make proper adjustments or repairs see KombiMotor instruction manual.
To reduce the risk of injury from thrown objects, never operate the unit without the proper deflector for the machine and cutting attachment being used.
The gearbox becomes hot during operation. To reduce the risk of burn injury, do not touch the gear housing.
Take special care in slippery conditions (ice, wet ground, snow) on slopes or uneven ground.
4
FCS-KM
Watch out for obstacles: Roots and tree stumps which could cause you to trip or stumble.
Inspect the work area: Stones, pieces of metal or other solid objects may be thrown more than 15 meters and cause personal injury or damage the cutting attachment and property (e.g. parked vehicles, windows).
To avoid the risk of electric shock, never use your power tool in areas where electrical lines are laid on the surface or buried just below the surface. Striking and damaging such lines with the KombiTool could cause serious or even fatal injury.
Make sure you always have good balance and secure footing.
Special care must be taken when working in difficult, over-grown terrain.
Be particularly alert and cautious when wearing hearing protection because your ability to hear warnings (shouts, alarms, etc.) is restricted.
To reduce the risk of accidents, take a break in good time to avoid tiredness or exhaustion.
Work calmly and carefully in daylight conditions and only when visibility is good. Stay alert so as not to endanger others.
FCS-KM
Do not touch the cutting blade while the engine is running. If the blade becomes jammed by an obstruction, switch off the engine immediately before attempting to remove the obstruction risk of injury.
Opening the throttle while the blade is blocked increases the load and reduces engine speed. The clutch then slips continuously and this causes overheating and damage to important components (e.g. clutch, polymer housing components) and this can increase the risk of injury from the cutting attachment moving while the engine is idling.
If your power tool is subjected to unusually high loads for which it was not designed (e.g. heavy impact or a fall), always check that it is in good condition before continuing work see also “Before Starting”. Make sure the safety devices are working properly. Do not continue operating your power tool if it is damaged. In case of doubt, consult your servicing dealer.
Check the cutting blade at regular short intervals during operation or immediately if there is a noticeable change in cutting behavior:
Turn off the engine. Hold the unit firmly and press the blade into the ground to bring it to a standstill.
Check condition and tightness, look for cracks.
Replace a damaged blade immediately, even if it has only superficial cracks.
English
Clean the cutting attachment and deflector at regular intervals during operation.
Shut down the engine.
Wear gloves.
Remove grass, weeds, clumps of soil, etc.
To reduce the risk of injury, shut off the engine before changing the cutting attachment.
Do not continue using or attempt to repair a damaged or cracked blade by welding or straightening risk of out of balance.
This may cause parts of the cutting attachment to come off and hit the operator or bystanders at high speed and result in serious or fatal injuries.
If a rotating metal cutting attachment makes contact with a rock or other solid object there is a risk of sparking which may cause easily combustible material to catch fire under certain circumstances. Dry plants and scrub are also easily combustible, especially in hot and dry weather conditions. If there is a risk of fire, do not use metal cutting attachments near combustible materials, dry plants or scrub. Always contact your local forest authority for information on a possible fire risk.
After Finishing Work
After finishing work or before leaving the power tool unattended: Shut off the engine.
After finishing work, clean dirt, soil and plant residue off the cutting attachment wear gloves to reduce the risk of injury.
5
257BA003 KN 257BA007 KN
English
Do not use grease solvents for cleaning.
After thoroughly cleaning, coat surface of metal cutting attachments with a corrosion inhibitor.
Cutting Attachments and Deflectors
Maintenance and Repairs
Using the Unit
Service the machine regularly. Do not attempt any maintenance or repair work not described in the KombiTool and KombiEngine instruction manuals. Have all other work performed by a servicing dealer.
STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information.
Only use high-quality replacement parts in order to avoid the risk of accidents and damage to the machine. If you have any questions in this respect, consult a servicing dealer.
STIHL recommends the use of genuine STIHL replacement parts. They are specifically designed to match your model and meet your performance requirements.
To reduce the risk of injury, always shut off the engine before carrying out any maintenance or repairs or cleaning the machine.
The arrow on the deflector shows the direction of rotation of the blade see “Using the Unit”.
Operate the edger only with the skirt properly mounted on the deflector see “Replacing the Skirt”.
Handle the blade with care see “Using the Unit”.
Best cutting results: At full throttle working at a steady pace.
STIHL recommends you use only original STIHL cutting blades see “Special Accessories”. Only use deflectors or accessories that are explicity approved for this power tool by STIHL or are technically identical.
Your power edger is designed to produce sharp contoured borders around lawns and flower beds. It will cut almost all types of grass, weeds and soft green plants.
Preparations
If the work area is very dry, spray it lightly with water: this softens the soil and ensures that less dust is created. Slightly damp green plants are easier to cut.
WARNING
Clear away all obstacles and solid objects from the work area.
6
FCS-KM
N Plan the best route for edging. Always hold and operate your edger on the right-hand side of your body.
Adjusting Depth of Cut
Adjust correctly
English
257BA006 KN
2
1 A
N Shut down the engine. N Loosen the wingnut (1)
counterclockwise. N Push wheel (2) upwards to increase
the depth of cut (A) or downwards to reduce the depth of cut (A).
257BA004 KN
2 3 B
The depth of cut depends on the unevenness of the ground, your height and the way you hold the edger. Use the following procedure: N Adjust the depth wheel (2) so that
the blade (3) just touches the ground or breaks the surface of the soil (B) by no more than 5 mm (0.2 in).
257BA005 KN
N Tighten down the wingnut clockwise.
N Standing in the normal working position, check the depth of cut again and correct it if necessary.
257BA007 KN
FCS-KM
WARNING Do not adjust the deflector. The deflector has been set at the factory so that the arrow on the deflector and the open side point away from the
7
English
operator. This ensures that cuttings and other debris are directed away from the power tool and operator.
Edging
N Always walk forwards when cutting, do not pull the unit towards you.
N Cut at a steady pace to avoid having to make several passes.
Approved KombiEngines
KombiEngines
Only use KombiEngines supplied or
1
explicitly approved by STIHL for use with the attachment.
This KombiTool may be operated only in combination with the following KombiEngines:
STIHL KM 55 R, KM 56 R, KM 85 R, KM 90, KM 90 R, KM 94 R1), KM 100, KM 100 R, KM 110, KM 110 R, KM 130, KM 130 R, KMA 130 R, KMA 135 R
N Start the engine
N Start the cut at no less than half throttle and continue cutting at full throttle.
N Hold and guide your power tool so that the blade is vertical.
N Cut steadily so that the engine is not lugged down do not apply force.
N Operate at no more than a normal walking pace.
N Do not push the blade into the ground.
257BA008 KN 257BA009 KN
N Use the gunning sight (1) to line the blade up with the edge of the bed.
WARNING Loop-handled machines must be equipped with a barrier bar.
Brushcutters with split boom
The KombiTool can also be fitted to STIHL brushcutters with a split boom (Tmodels) (basic power tools). This KombiTool can therefore also be used on the following machine: STIHL FR 130 T
WARNING Refer to the user manual of the power tool for use of the barrier bar.
1) When using the FCS-KM together with the KM 94 R, the rigid shaft in the FCS-KM must be replaced by a flexible shaft.
8
FCS-KM
Assembling the Unit
Installing the Flexible Shaft
English
L
0000-GXX-3234-A0
0000-GXX-3242-A0
413BA014 KN
257BA010 KN
N Pull the protective caps off the ends of the drive tube and keep them in a safe place for later use see “Storing the Machine”.
NOTICE The plug may come out of the drive tube when you pull off the cap. Push it back into the drive tube as far as stop.
002BA248 KN
If the FCS-KM KombiTool is used with a KM 94 R KombiMotor, its rigid shaft must be removed and the flexible shaft installed in its place. The flexible shaft is not included with the machine. It is available from a STIHL servicing dealer. The rigid shaft must be re-installed if the FCS-KM is used with a KombiMotor other than the KM 94 R. N If the gearbox is still mounted on the
shaft: Remove the gearbox.
1
2
N Pull the rigid shaft (1) out of the drive tube.
N Lubricate the flexible shaft (2) with STIHL multipurpose grease or gear lubricant.
0000-GXX-3240-A0
N Push the flexible shaft into the drive tube.
The drive shaft must not project from the tube more than 22 mm (L).
Mounting the Gearbox
1
2
3
N Loosen the clamp screw (1) on the gearbox (2).
N Push the drive tube (3) through the clamp and into the gearbox turn the gearbox back and forth as necessary.
N Once the end of the drive tube is inserted beyond the slot (see arrow) in the clamp (5), push it fully home as far as stop.
N Tighten down the clamp screw as far as stop.
FCS-KM
9
257BA013 KN
English
2
3
1 4
Mounting the KombiTool
2
1
Mounting the Cutting Blade
257BA012 KN
002BA326 KN
N Line up the gearbox (2) on the drive tube (3) so that the lug (arrow) points vertically upwards when the depth wheel (4) is vertical.
N Tighten down the clamp screw (1) firmly.
N Push the lug (1) on the drive tube into the slot (2) in the coupling sleeve as far as stop.
3
N Lay the power edger on its back so that the blade mounting (1) faces up.
5
002BA327 KN
4
When correctly installed, the red line (3) (arrow point) must be flush with the end of the coupling sleeve. N Tighten down the star knob (4)
firmly.
Removing the KombiTool
6
2
4
3
N Reverse the above sequence to remove the drive tube.
N Insert the stop pin (2) into the hole (3) as far as stop apply slight pressure and turn back and forth
257BA014 KN
10
FCS-KM
together with the thrust plate (4) until the pin slips into position and blocks the shaft.
N Fit the combination wrench (5) on the screw (6).
N Loosen the screw clockwise (lefthand thread) and take it out.
9
6
4 9
11 10
English
Starting / Stopping the Engine
Starting the engine
To start the engine, basically follow the instructions for use for the KombiEngine or basic power tool!
NOTICE Do not stand or kneel on the shaft!
WARNING If the engine is started, the blade may rotate as soon as the engine is running therefore blip the throttle trigger as soon as the engine is running the engine begins to idle. The other starting procedure is described in the instruction manual for the KombiEngine or basic power tool.
Switching off the engine
9926BA009 KN
N see instruction manual for the KombiEngine or basic power tool
9926BA010 KN
257BA015 KN
N Remove the thrust washer (4). N Position the blade (9) on the thrust
plate (10).
WARNING
Collar (see arrow) must engage the blade’s mounting hole. N Fit the thrust washer on the
shaft (11) and block the shaft. N Fit the screw (6) in the shaft
counterclockwise and tighten it down firmly.
N Place the machine on the ground in a secure position
The blade must not touch the ground or any other objects risk of accident!
N Assume a firm stance possibilities: standing, bending or kneeling
N Press the machine firmly against the ground with the left hand do not touch the control elements on the control handle while doing so see instruction manual for the KombiEngine or basic power tool
FCS-KM
11
English
Storing the Machine
Replacing the Depth Wheel Replacing the Skirt
For periods of 3 months or longer
N Remove, clean and inspect the cutting blade.
Have a worn depth wheel replaced by a servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized
Removing the skirt
N If the KombiTool is removed from
STIHL servicing dealer.
the KombiEngine and stored
separately: Fit the protective cap on Depth Wheel
the drive tube to avoid dirt getting into the coupling.
5
N Store the machine in a dry, high or
locked location out of the reach of
children and other unauthorized
persons.
2
1
4
1
6
2
N The end of the thread on the screw (1) is peened over to ensure that the wingnut (2) does not work loose and be lost.
A very high torque has to be applied to remove the wingnut from the screw. If the parts are then reassembled, the captive function is no longer guaranteed. In such a case have the screw and wingnut replaced by a servicing dealer.
3
N Undo and remove the screw (1). N Remove the washer (2) N Pull the skirt (3) out of the
segment (6) and out of the gap (5) in the deflector
239BA023 KN 239BA024 KN
12
FCS-KM
Fitting the skirt
12
English
Replacing the Cutting Blade
Checking and Replacing the Wear Guard
1 A 5
4
CB
Checking the Wear Guard
1 2
239BA025 KN 257BA016 KN
257BA017 KN
6
3
N In order to push the skirt easily into the gap on the deflector, apply a thin coating of resin-free oil to the top of the skirt
N Thread the skirt (3) into the segment (6) and push into the gap (5) of the deflector the bore in the skirt must be fixed in the arbor (4)
N Place washer (2) onto screw (1). N Insert and tighten the screw (1)
Do not attempt to straighten or weld a bent or cracked blade it may break it must be replaced see “Mounting the Cutting Blade”.
STIHL recommends you use only the following original STIHL cutting blades:
Length
200 mm 200 mm
Thickness
2.4 mm
3.8 mm
Marking
4133 / 01 4133 / 02
Do not resharpen the blade.
N Replace the blade (1) if its length (A) is no longer sufficient to maintain the necessary ground clearance (B) and obtain the required depth of cut (C).
Checking Out-of-Balance
To avoid out-of-balance:
N Have your dealer check the blade for out-of-balance on a STIHL balancer (special accessory) STIHL recommends an authorized STIHL servicing dealer. If blade is out-of-balance, fit a new one see “Mounting the Cutting Blade”.
N Check the wear guard (1) for damage before starting the power tool.
N The wear guard must be replaced as soon as the gearbox (2) (arrow) becomes visible.
NOTICE
The gearbox may be seriously damaged if you do not replace the wear guard in good time.
FCS-KM
13
English Replacing the Wear Guard
454
N Remove the cutting blade – see “Mounting the Cutting Blade”.
N Remove the thrust plate (3). N Take out the screws (4). N Fit the new wear guard (5). N Insert the screws (4) and tighten
them down firmly. N Fit the thrust plate (3). N Mount the cutting blade – see
“Mounting the Cutting Blade”.
257BA018 KN
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily working time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the specified intervals accordingly.
Accessible screws and nuts (not wingnut for depth wheel)
N Check and retighten if necessary
Depth wheel
N Visual inspection before starting work
N Check tightness of wingnut before starting work
N Have replaced if necessary see “Replacing Wheels”
Skirt
N Visual inspection before starting work
N Replace if damaged see “Replacing the Skirt”
Blade
N Visual inspection before starting work
N Check tightness before starting work
N Have checked for out-of-balance if necessary, replace if out-of-balance see “Replacing the Cutting Blade”
N Replace if damaged see “Replacing the Cutting Blade”
Wear guard
N Check before starting work
N Replace if necessary see “Checking and Replacing the Wear Guard”
Safety labels
N Replace illegible safety labels
14
FCS-KM
Minimize Wear and Avoid Damage
Observing the instructions in this manual and the KombiEngine manual helps reduce the risk of unnecessary wear and damage to the power tool.
The power tool must be operated, maintained and stored with the due care and attention described in these instruction manuals.
The user is responsible for all damage caused by non-observance of the safety precautions, operating and maintenance instructions. This includes in particular:
Alterations or modifications to the product not approved by STIHL.
Using tools or accessories which are neither approved or suitable for the product or are of a poor quality.
Using the product for purposes for which it was not designed.
Using the product for sports or competitive events.
Consequential damage caused by continuing to use the product with defective components.
Maintenance Work
servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information.
If these maintenance operations are not carried out as specified, the user assumes responsibility for any damage that may occur. Among other parts, this includes:
Corrosion and other consequential damage resulting from improper storage.
Damage to the product resulting from the use of poor quality replacement parts.
Parts Subject to Wear and Tear
Some parts of the power tool are subject to normal wear and tear even during regular operation in accordance with instructions and, depending on the type and duration of use, have to be replaced in good time. Among other parts, this includes:
Blades (all types)
Mounting hardware for blade
Deflector, skirt
Wear guards
All the operations described in the chapter on “Maintenance and Care” must be performed on a regular basis. If these maintenance operations cannot be performed by the owner, they should be performed by a servicing dealer.
STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL
FCS-KM
English 15
English
Main Parts
2 1
3 4
5
1 Blade 2 Deflector 3 Drive tube 4 Depth wheel 5 Wingnut 6 Gearbox 7 Wear guard 8 Skirt
6
8
7
16
406BA016 KN
FCS-KM
Specifications
Engine speed
Max. output shaft speed on cutting attachment with KombiEngine:
KM 55 R: KM 56 R: KM 85 R:
4550 rpm 4800 rpm 5050 rpm
KM 90 R:
4900 rpm
KM 94 R:
4900 rpm
KM 100 R:
4900 rpm
KM 110 R: KM 130 R: KMA 130 R: KMA 135 R:
4900 rpm 4900 rpm 4070 rpm 4070 rpm
Max. output shaft speed (cutting attachment) on STIHL brushcutters with split shaft (T models):
FR 130 T:
4900 rpm
Weight
with deflector and blade: 2.4 kg
Sound and Vibration Levels
Noise and vibration data measurements on power tools with the FCS-KM KombiTool include idling and rated maximum speed with the same duration of exposure.
For further details on compliance with Vibration Directive 2002/44/EC see www.stihl.com/vib
Sound pressure level Lpeq to ISO 11201
KM 55 R with loop handle: 93 dB(A)
KM 56 R with loop handle: 93 dB(A)
KM 85 R with loop handle: 96 dB(A)
KM 90 R with loop handle: 90 dB(A)
KM 100 R with loop handle:
90 dB(A)
KM 130 with bike handle: 95 dB(A)
KM 130 R with loop handle:
95 dB(A)
FR 130 T:
93 dB(A)
Sound pressure level Lpeq to ISO 11789 KM 94 R with loop handle: 92 dB(A)
Sound pressure level Lpeq in accordance with 50636-2-91
KM 135 R with loop handle:
77.5 dB(A)
Sound pressure level Lpeq in accordance with 50636-2-92
KM 130 R with loop handle:
78 dB(A)
Sound power level Lweq to ISO 3744
KM 55 R with loop handle: 102 dB(A)
KM 56 R with loop handle: 103 dB(A)
KM 85 R with loop handle: 107 dB(A)
KM 90 R with loop handle: 101 dB(A)
KM 100 R with loop handle:
101 dB(A)
KM 130 with bike handle: 105 dB(A)
KM 130 R with loop handle:
105 dB(A)
FR 130 T:
105 dB(A)
English
Sound power level Lweq to ISO 11789 KM 94 R with loop handle: 104 dB(A)
Sound power level Lw in accordance with EN 50636-2-91
KM 135 R with loop handle:
94 dB(A)
Sound power level Lw in accordance with EN 50636-2-92
KM 130 R with loop handle:
90 dB(A)
Vibration level ahv,eq to ISO 11789
KM 55 R with loop handle:
KM 56 R with loop handle:
KM 85 R with loop handle:
KM 90 R with loop handle:
KM 100 R with loop handle:
KM 130 with bike handle:
KM 130 R with loop handle:
FR 130 T:
Handle, left 5.3 m/s2 5.0 m/s2 3.0 m/s2
3.4 m/s2 3.1 m/s2 4.2 m/s2 6.1 m/s2 1.3 m/s2
Handle, right 6.8 m/s2 6.4 m/s2 4.9 m/s2
4.1 m/s2 4.8 m/s2 3.5 m/s2 6.8 m/s2 1.7 m/s2
Vibration level ahv,eq to ISO 22867
KM 94 R with loop handle:
Handle, Handle,
left
right
4.1 m/s2 4.2 m/s2
FCS-KM
17
English
Vibration level ahv,eq in accordance with EN 50636-2-91
KM 135 R with loop handle:
Handle, left
1.6 m/s2
Handle, right
1.9 m/s2
Vibration level ahv,eq in accordance with EN 50636-2-92
KM 130 R with loop handle:
Handle, left
2.0 m/s2
Handle, right
1.5 m/s2
The K-factor in accordance with Directive 2006/42/EC is 2.0 dB(A) for the sound pressure level and sound power level; the K-factor in accordance with Directive 2006/42/EC is 2.0 m/s2 for the vibration level.
REACH
REACH is an EC regulation and stands for the Registration, Evaluation, Authorisation and Restriction of Chemical substances.
For information on compliance with the REACH regulation (EC) No. 1907/2006 see www.stihl.com/reach.
Maintenance and Repairs
Users of this machine may only carry out the maintenance and service work described in this user manual. All other repairs must be carried out by a servicing dealer.
STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information.
When repairing the machine, only use replacement parts which have been approved by STIHL for this power tool or are technically identical. Only use highquality replacement parts in order to avoid the risk of accidents and damage to the machine.
STIHL recommends the use of original STIHL replacement parts.
Original STIHL parts can be identified by the STIHL part number, the { logo and the STIHL parts symbol K (the symbol may appear alone on small parts).
Disposal
Observe all country-specific waste disposal rules and regulations.
STIHL products must not be thrown in the garbage can. Take the product, accessories and packaging to an approved disposal site for environmentfriendly recycling. Contact your STIHL servicing dealer for the latest information on waste disposal.
000BA073 KN
18
FCS-KM
EC Declaration of Conformity
ANDREAS STIHL AG & Co. KG Badstr. 115 D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation: Make: Series: Serial identification number:
KombiTool edger STIHL FCS-KM
4180
conforms to the relevant provisions of Directive 2006/42/EC and has been developed and manufactured in compliance with the following standards in the versions valid on the date of production:
EN ISO 12100 (in conjunction with the listed KM- and FR- tools)
EN ISO 12100, EN 60335-1, EN 506362-92 (in conjunction with the specified KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG Produktzulassung
The year of manufacture is specified on the power tool.
Waiblingen, 15.07.2021 ANDREAS STIHL AG & Co. KG pp
Dr. Jürgen Hoffmann Director Product Certification & Regulatory Affairs
English
UKCA Declaration of Conformity
ANDREAS STIHL AG & Co. KG Badstr. 115 D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation: Make: Series: Serial identification number:
KombiTool edger STIHL FCS-KM
4180
conforms to the relevant provisions of the UK Supply of Machinery (Safety) Regulations 2008 and has been manufactured in compliance with the following standards in the versions valid on the date of production:
EN ISO 12100 (in conjunction with the listed KM- and FR- tools)
EN ISO 12100, EN 60335-1, EN 506362-92 (in conjunction with the specified KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
The year of manufacture is indicated on the power tool.
FCS-KM
19
English Waiblingen, 15.07.2021 ANDREAS STIHL AG & Co. KG pp Dr. Jürgen Hoffmann Director Product Certification & Regulatory Affairs
20
FCS-KM
0458-472-0121-D englisch G
www.stihl.com
*04584720121D* 0458-472-0121-D
Documents / Resources
STIHL FCS-KM Straight Shaft Lawn Edger Attachment [pdf] Instruction Manual FCS-KM, Straight Shaft Lawn Edger Attachment, FCS-KM Straight Shaft Lawn Edger Attachment | |
STIHL FCS-KM Straight Shaft Lawn Edger [pdf] Instruction Manual FCS-KM Straight Shaft Lawn Edger, FCS-KM, Straight Shaft Lawn Edger, Shaft Lawn Edger, Lawn Edger, Edger |
References
- Country Routing Page: Welcome to STIHL | STIHL
- REACH Regulation: Available in different languages | STIHL | STIHL
- Information on Physical Agents Directive Vibration | STIHL | STIHL
- Country Routing Page: Welcome to STIHL | STIHL
- User Manual