EPOMAKER logoEK98-1 VIA 1800 Compact Triple Modes
Hot Swappable RGB VIA Programmable Keyboard
User Guide

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard1800 Compact Triple Modes Hot Swappable
RGB VIA-programmable Keyboard
Should you require more assistance please email us at support@epomaker.com

BASIC FUNCTION

FN + F1 Media Player
FN + F2 Volume –
FN + F3 Volume +
FN + F4 Mute
FN + F5 Stop
FN + F6 Previous Track
FN + F7 Pause/Play
FN + F8 Next Track
FN + F9 Mail
FN + F10 Home Page
FN + F11 Calculator
FN + F12 Search
FN + INSERT PrtSc
FN + DEL Pause
FN + PGUP Home
FN + PGDN End
FN + WIN Win Lock
FUNCTION KEY COMBINATIONS
FN + ESC (HOLD 3S) Reset the Keyboard
FN + Q Short Press to Switch to BT1; Long Press to Pair Devices
FN + W Short Press to Switch to BT2; Long Press to Pair Devices
FN + E Short Press to Switch to BT3 Long Press to Pair Devices
FN + R Long Press to Pair Devices
FN + SPACEBAR Battery Check
FN + A Win Mode
FN + S Mac Mode
LIGHT EFFECTS
FN + BACKSPACE Turn On/Off
ALL Lights
FN + \| Toggle RGB Effects
FN + [{ Sat +
FN + ]} Sat –
FN + ← Hue –
FN + -_ Backlights Speed –
FN + =+ Backlights Speed +
FN + ↓ Backlights Brightness –
FN + ↑ Backlights Brightness +
FN + → Hue +

PAIRING BLUETOOTH

Toggle the side switch to make sure that the keyboard is under the Bluetooth mode:

  1. Hold Fn+Q/W/E for 3-5 seconds till the indicators flashes fast in red/green/blue, the keyboard is ready to pair.
  2. Turn on your Bluetooth device and find ‘Penmaker EK98-1/2/3’, then connect.
    When the keyboard is connected to the Bluetooth device, the indicator light stops flashing, the connection is done.
  3. Press Fn+Q/W/E to toggle between the Bluetooth devices 1/2/3.

PAIRING WIRELESS 2.4GHZ

  1. Toggle the side switch to 2.4G mode (the indicator flashes cyan when entering to the 2.4G mode), the keyboard is ready to pair.
  2. Insert the 2.4G dongle to your device, the indicator stops flashing and the connection is done.
  3. Reconnect 2.4G mode: Hold Fn+Q for for 3-5 seconds till the light flash fast in cyan, the keyboard is ready to pair.

WIRED MODE
Toggle the side switch to the wired mode, and the keyboard enters to the wired mode successfully.
BATTERY CHECK
Hold Fn+Spacebar, the keys from 1! to 0) lights up to show the battery percentage; for example, if the keys from 1! to 6^ light up when holding Fn+ Spacebar, it means that the battery life is currently 60%; if keys of 1!-0) light up, battery life is 100%.
INDICATOR:
Low Battery:Fn key blinks red
Charing:Fn key stays red
Charged:Fn key lights up with backlight
Win Lock Win key lights up

HOW TO USE VIA:

  1. Please visit “https://github.com/WestBerryVIA/via-releases/releases” todownload the latest VIA application for your computer’s. Turn on the button of  “Use V2 definitions (deprecated)”EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - USE VIA
  2.  Import the JSON File to VIA
    If the keyboard is under the wired mode: download Epomaker EK98 wired json file via https://epomaker.com/blogs/qmk-via/epomaker-ek98-usb-via-json and load the file;
    If the keyboard is under 2.4G mode, download Epomaker EK98 2.4G json file via https://epomaker.com/blogs/qmk-via/epomaker-ek98-24g-via-json and load the file.EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - JSON File
  3. When the loading is completed, the “Configure” Tab displays the layout and programmable functions.EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - USE VIA1

SPECS

MODEL: EPOMAKER EK98 VIA
KEYS AMOUNT: 98 Keys
CASE MATERIAL: ABS Plastic
PLATE MATERIAL: PC
STABILIZER TYPE: Plate-mounted
PCB TYPE: 3/5-pin Hostway PCB
CONNECTIVITY: Type-C Wired
ANTI-GHOSTKEY: NKRO
POLLING RATE: 1000hz under Wired and 2.4G Mode; 125hz under Bluetooth Mode
BATTERY CAPACITY: 4000mAh
PROGRAM: VIA
COMPATIBILITY: WINDOWS/MAC
DIMENSION: 379x144x30mm
WEIGHT: Around0.8kg

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - qr code1

REP L A C I N G K E Y C APS AND S W I T CHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboardswitches

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - JSON File 1

Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - USE VIA2

Remove Switches

  1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
  2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
  3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - Mechanical

The Switch Puller tool aligns Vertically to the Switch to unclip the plastic securing the switch to the plate.

Install Switches

  1. Check that all the switch metallic pins are perfectly straight and clean.
  2. Align the switch vertically to have the Gate Ron logo facing north. The pins should align themselves to the keyboard PBC.
  3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
  4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - icon3 Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer  service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any additional help. official store of Epomaker, please contact them directly for any

COMMUNITY FOR UMS
Join our community and learn together with other keyboard enthusiasts.
EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - icon4 https://discord.gg/2q3Z7C2
EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - icon5 https://www.reddit.com/r/Epomaker/
WARRANTY
EPOMAKER’s Warranty covers any factory defects that doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send  the defective unit back to Epomaker. might affect the proper functionality of your purchase, It We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year  warranty if the inspection by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.  shows any sign of modification or changes unsupported We will ONLY cover the item if it is bought from our official

EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - qr codeMade in China
Manufacturer: Shenzhen Chengyu Technology Co., Ltd.
Address: Seventh Floor, Kai Dear Building, No.168 Tingsha Road,
Xili Street, Nanshan District, Shenzhen, Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com
EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - icon APEX CE SPECIALISTS LIMITED
Unit 3d North Point House, North Point Business Park,
New Mallow Road Cork, T23 AT2P, Ireland
Contact: Wells Tel: +353212066339
APEX CE SPECIALISTS LIMITED
89 Princess Street, Manchester, M1 4HT, UK
Contact: Wells
E-mail: info@apex-ce.com EPOMAKER EK98 1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard - icon2

Documents / Resources

EPOMAKER EK98-1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard [pdf] User Guide
EK98-1 VIA 1800 Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard, EK98-1 VIA 1800, Compact Triple Modes Hot Swappable RGB VIA Programmable Keyboard, Hot Swappable RGB VIA Programmable Keyboard, RGB VIA Programmable Keyboard, Programmable Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *