JBL LOGOSTAGE 1200S Subwoofer
Owner’s ManualJBL STAGE 1200S Subwoofer

STAGE 1200S Subwoofer

THANK YOU FOR CHOOSING THIS JBL PRODUCT
This product has been designed to deliver great bass performance from a compact, easily installed enclosure. To get the best performance from your enclosure, we strongly recommend that you entrust installation to a qualified professional. Although these instructions explain how to install your enclosure in a general sense, they do not show specific installation methods that may be required for your particular vehicle. If you do not have the necessary tools or experience, do not attempt the installation yourself. Instead, please ask your authorized JBL car audio dealer about professional installation. To help us serve you better if your enclosure ever requires warranty service, please retain your original sales receipt and serial number.

INSTALLATION WARNINGS AND TIPS

INSTALLATION TIPS

  • Always wear protective eyewear when using tools.
  • Turn off all audio components and other electrical devices before you start. Disconnect the negative (–) lead from your vehicle’s battery.
  • Check clearances on both sides of a planned mounting surface. Be sure that screws or wires will not puncture brake lines, fuel lines or wiring harnesses, and that wire routing will not interfere with the safe operation of the vehicle.
  • When making electrical connections, make sure they are secure and properly insulated.
  • Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw.
  • Do not mount speakers where they will get wet.

CHOOSING A MOUNTING LOCATION FOR THE ENCLOSURE
Choose a mounting location that doesn’t interfere with cargo, the fold-down rear seat or the trunk lid. The best location is usually a corner of the trunk or cargo area. Securely mount the enclosure to the mounting surface.
WARNING: Playing loud music in an automobile can permanently damage your hearing as well as hinder your ability to hear traffic.
Listening at low levels while driving is recommended. HARMAN International accepts no liability for hearing loss, bodily injury or property damage resulting from use or misuse of this product.

SPEAKER CONNECTIONS

Connect the + and – terminals on the enclosure to the amplifier’s outputs, observing proper polarity. Use at least 0.5mm² (20 AWG) speaker wire for the connections to the enclosure.

JBL STAGE 1200S Subwoofer - SPEAKER CONNECTIONS

SPECIFICATIONS

Stage 1200S
Woofer: 12″ (300mm)
Power handling: 250Wrms
Power handling, peak: 1000W
Sensitivity (2.83V @1m): 91dB
Frequency response: 34Hz – 200Hz
Impedance: 2 ohms
Dimensions:
(WxHxD1xD2)
17-3/16″ x 14-3/8″ x 6-5/16″ x 9-15/16″/(436mm x 365mm x 159mm x 252mm)

GENERAL CARE

The loudspeaker may be cleaned with a damp cloth. Do not use any cleaners or solvents.
A valid serial number is required for warranty coverage. This product is designed for mobile applications and is not intended for connection to the mains.
Passive speaker system
Manufacturer: Harman International Industries Incorporated, USA, 06901 Connecticut, Stamford, Atlantic Street 400, office 1500
Made in China
Importer: LLC “HARMAN RUS CIS”, Russia, 127018, Moscow, st. Dvintsev, 12, building 1
Warranty period: 1 year
Service life: 3 years
Service center information: www.harman.com/ru
Technical support: 8 (800) 700 0467
Organization authorized to accept consumer claims: HARMAN RUS CIS LLC
The product is certified
The date of manufacture of the device is determined by two letters from the second group of characters of the serial number of the product, following after the separator character “-“.
The encoding corresponds to the order of the letters of the Latin alphabet, starting from January 2010: 000000-MY0000000, where “M” is the month of production (A – January, B – February, C – March, etc.) and “Y” – year of production (A – 2010, B – 2011, C – 2012, etc.).

CA_JBL_Stage 1200S Subwoofer Enclosure_OM_CR_V5

© 2020 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.

JBL HARMAN LOGOHARMAN International
Industries, Inc.
8500 Balboa Boulevard,
Northridge, CA 91329 USA
www.JBL.comJBL STAGE 1200S Subwoofer - ICON 1

Documents / Resources

JBL STAGE 1200S Subwoofer [pdf] Owner's Manual
STAGE 1200S Subwoofer, STAGE 1200S, 1200S Subwoofer, 1200S, Subwoofer

References

Leave a comment

Your email address will not be published. Required fields are marked *