milwaukee 2672-21S 18V Cable Cutter Kit User Manual

Contents hide

1 2672-21S 18V Cable Cutter Kit

2 Product Information

3 General Power Tool Safety Warnings

4 Product Usage Instructions

5 GENERAL POWER TOOL SAFETY WARNINGS

6 SPECIFICATIONS

7 FUNCTIONAL DESCRIPTION

13 Documents / Resources

13.1 References

14 Related Posts

2672-21S 18V Cable Cutter Kit

Product Information

The product is a power tool that can be either mains-operated (corded) or battery-operated (cordless). It is a cable cutter that can be used for sawing, grinding, drilling, and other construction activities. The product comes with a user manual that contains safety warnings, instructions, illustrations, and specifications for proper and safe usage of the tool.

General Power Tool Safety Warnings

The user must read and understand the manual to reduce the risk of injuries.

Failure to follow the instructions listed in the manual may result in electric shock and cause severe injury within a fraction of a second.
Use dust collection and extraction facilities to ensure proper usage and reduce the risk of complacency towards tool safety principles.

Avoid working in hazardous environments such as flammable areas which may ignite dust or fumes.

Power Tool Use and Care

Always wear appropriate personal protective equipment such as non-skid safety shoes, hard hat, or hearing mask.
Use common sense when operating a power tool.

Ensure that the power tool is controlled and free from oil and grease to avoid accidents.
Remove the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.

Battery Tool Use and Care

Do not use the battery pack or tool outside the temperature range specified in the instructions.

Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service
The safety of the power tool is ensured by following the instructions provided in the manual. Any repairs or maintenance should be done by the manufacturer or authorized service providers.

Specific Safety Rules for Cable Cutter

Wear safety glasses with side shields when operating or servicing the tool to avoid material cracking or shattering.

Work on deenergized lines when possible to reduce the risk of electric shock, arc flash, and property damage.
The tool is not insulated, and proper precautions should be taken while working on energized lines as per NFPA guidelines.

Do not use the tool if you do not understand the operating instructions or feel the work is beyond your capability.

Symbology
The product contains symbols that indicate the voltage and direct current used by the tool. The user must follow the instructions provided in the manual to reduce the risk of electric shock, arc flash, and property damage.

Product Usage Instructions

To use the cable cutter, follow the below instructions:

Read and understand the user manual before using the tool.

Wear appropriate personal protective equipment such as non-skid safety shoes, hard hat, or hearing mask.
Ensure that the power tool is controlled and free from oil and grease to avoid accidents.

Use dust collection and extraction facilities to ensure proper usage and reduce the risk of complacency towards tool safety principles.
Avoid working in hazardous environments such as flammable areas which may ignite dust or fumes.

Work on deenergized lines when possible to reduce the risk of electric shock, arc flash, and property damage.
Use safety glasses with side shields when operating or servicing the tool to avoid material cracking or shattering.

Do not use the tool if you do not understand the operating instructions or feel the work is beyond your capability.
Store the power tool properly after use, and remove the battery pack from the tool before making any adjustments or changing accessories.

Follow the specific safety rules provided in the manual for cable cutter usage.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings, instruc-tions, illustrations and specifica- tions provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and in-structions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmo-spheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Un-modified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suit-able for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.

PERSONAL SAFETY

Stay alert, watch what you are doing and use com-mon sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a ro-tating part of the power tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jew-elry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265°F (130°C) may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

SERVICE

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manu-facturer or authorized service providers.

SPECIFIC SAFETY RULES FOR CABLE CUTTER

Do not use tool without cutting jaws installed. Fingers could be crushed.
Blade is sharp. Keep hands away from all cutting edges and moving parts. Laceration and amputation can occur.
To reduce the risk of injury, wear safety goggles or glasses with side shields when operating or servic-ing the tool. Material may crack or shatter. WARNING Telo ectric reduce shothe ck risk andof arc proflash,perty damage, work on deenergized lines when pos-sible. Tool is not insulated. Should work on energized lines be required, ensure all proper precautions, including those contained in NFPA 70E, have been taken first.
Chemical Burn Hazard. Keep coin cell battery away from children.
For best results, use only with energy absorbing lanyards. Ropes, straps or chains may break and cause failure. Do not use with lanyards at full ten-sion.

Always use common sense and be cautious when using tools. It is not possible to anticipate every situation that could result in a dangerous outcome. Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained professional for additional information or training.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement. WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paint crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

SYMBOLOGY

V: Volts

Direct Current

WARNING: Keep hands away from all cutting edges and moving parts. Blade is sharp. Laceration and amputation can occur.

To reduce the risk of injury, wear safety goggles or glasses with side shields when operating or servicing the tool.

Read operator’s manual.

UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No……………………………………………….2672-20
Volts…………………………………………………………..18 DC
Battery Type………………………………………………M18™
Charger Type…………………………………………….M18™
Module/FCC ID………BGM220S2/QOQ-BGM220S2
Recommended Ambient
Operating Temperature…………………0°F to 122°F
Jaw Type…………………………………….477 ACSR Jaws
(Cat. No. 49-16-2773)
Maximum Capacity…….ACSR: 477 MCM Hen ACSR
Guy Wire: 3/8″ Non-EHS
Rebar: 3/8″
Ground Rod: 3/8″
Replacement Blades……………….Cat. No. 48-44-0412

Jaw Type………………………………..750 MCM Cu Jaws
(Cat. No. 49-16-2772)
Maximum Capacity……………Copper Cable: 750 mcm
Aluminum Cable: 1000 mcm*
Replacement Blades……………….Cat. No. 48-44-0411
* 750 MCM Cu Jaws will cut any aluminum cable with a diameter less than 1.225″
Jaw Type………………………..1/2″ EHS Guy Wire Jaws
(Cat. No. 49-16-2777)
Maximum Capacity.EHS Guy Wire: 1/2″ (19 strand)**
Non-EHS Guy Wire: 1/2″ (7 & 19 strand)**
ACSR: 4/0 AWG
Rebar: 3/8″
Ground Rod: 3/8″
Replacement Blades………………Cat. No. 48-44-2777
** May require two cutting cycles to complete cut on
1/2″ wire
Jaw Type……………………….Fine Stranded Wire Jaws
(Cat. No. 49-16-2778)
Maximum Capacity………………….Fine Stranded Wire:
1/0 AWG – 777.7 AWG***
Replacement Blades………………Cat. No. 48-44-2778
*** Jaws should only be used on the following wire classes: M, K, I/DLO

FUNCTIONAL DESCRIPTION

Backup release valve

750 MCM Cu jaws
Blades
Socket screws (5 mm)

Locking thumb screw
Trigger
Handle

LEDs
ONE-KEY™ indicator
Hanger

477 ACSR jaws
Blade retainer
Retaining pin

Fine stranded wire jaws

ASSEMBLY

WARNING Recharge only with the charger specific charging instructions, read the operator’s manual supplied with your charger and battery.

Removing/Inserting the Battery
To remove the battery, push in the release buttons and pull the battery pack away from the tool.

WARNING Always remove battery pack before To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place.
WARNING: Only use accessories specifically recommended for this tool. Others may be hazardous.

Blades are sharp. Keep hands away from cutting edge. Laceration can occur.

Inserting/Removing the Cutting Jaws
Use only MILWAUKEE cutting jaws. Do not use with other jaw types. Other jaw types can cause damage to the tool.

Remove the battery pack.
Remove the locking thumb screw (when used) from the back of the retaining pin.

Push in, then rotate the retaining pin counter clock-wise 90° . The pin will pop out.
Insert the cutting jaws. Line up the center hole with the retaining pin.
Push in the retaining pin, then rotate clockwise 90° .

Insert and hand tighten the locking thumb screw. NOTE: Use the locking thumb screw to prevent the retaining pin from being unintentionally loosened. A loose retaining pin may damage the tool.
Rotate the jaws to the desired angle.

CAUTION: To avoid damage to the tool, do not operate the tool without the retaining pin fully inserted and locked into position. Damage to the cylinder may occur.

Changing the Blades
Replace the blades when they become dull, rounded, chipped, or damaged. Always replace blades as a set. Use only MILWAUKEE blades and cutting jaws. Refer to Specifications for replacement blade numbers.

Remove the battery pack.
Remove cutting jaws from tool.
WARNING: Blades are sharp. Keep hands away from cutting edge. Laceration can occur.

Loosen, do not remove, the socket screws using a 5 mm hex wrench.
Carefully slide the blade out of the jaws, keeping fingers away from the cutting edge.
Insert the new blade, keeping fingers away from the cutting edge.

Securely tighten socket screws to 115 in-lbs.
NOTE: The tightening of the socket screws may cause the jaws to close. Keep hands and fingers out of jaws, and away from cutting edges!
Repeat for other blade. Always change blades as a set.

ONE-KEY™
To learn more about the ONE-KEY™ functionality for this tool, go to milwaukeetool.com/One-Key. To download the ONE-KEY™ app, visit the App Store or Google Play from your smart device.

ONE-KEY™ Indicator
Solid Blue	Wireless mode is active and ready to be configured via the ONE-KEY™ app.
Blinking Blue	Tool is actively communicating with the ONE-KEY™ app.
Blinking Red	Tool is in security lockout and can be unlocked by the owner via the ONE-KEY™ app.

OPERATION

WARNING: To reduce the risk of arc flash, electric shock and property damage, work on deenergized lines when possible. Tool is not insulated. Should work on energized lines be required, ensure all proper precautions, including those contained in NFPA 70E, have been taken first.
Blade is sharp. Keep hands away from cutting edges and moving parts. Avoid cutting short pieces of material that put hands near blades. Laceration and amputation can occur.
Always remove battery pack before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous.
Always wear proper eye protection marked to comply with ANSI Z87.1.

Cutting
Before cutting, ensure retaining pin is properly seated, and blade socket screws are tight.

Insert the workpiece squarely between the blades. Do not attempt to make angled cuts as it will dam-age the workpiece and blades.

Hold the tool firmly and support the workpiece. Ensure the workpiece is straight and centered in the jaws. Keep hands away from blades.
Pull and hold the trigger through the operation. When the cut is complete, the blades will separate and the tool will shut off. Release the trigger. NOTE: Workpiece may move slightly during the cut.
Two LEDs will light when the trigger is pulled.
WARNING: To reduce the risk of injury cut recommended materials for the, only jaws (see “Specifications”). Do not attempt to cut other materials.

Cutting Tips

Cut farther in from the end of the material to avoid crooked cuts.
Do not attempt angled cuts. It will damage the blades. Hold the material squarely between the blades.

Cut clean material to extend the blade life. Wipe dirt and debris from material and blades before begin-ning the cut.
Do not cut 477 ACSR materials with 750 MCM Cu jaws. Do not cut 750 MCM Cu materials with 477 ACSR jaws. It could damage the blades, jaws, and tool.
When using the 477 ACSR jaws, ensure the blade retainer is installed.

Only use the jaws on the material for which it was designed. Other materials could damage the blades, jaws, and tool.

Backup Release Valve
If the jaws need to be opened without completing the cycle, press and hold the backup release valve. Hold tool securely until the cylinder retracts fully. Jammed Blades

Dirt and debris can cause the blades to become jammed together after a cut.

If the tool shuts off and the blades are still closed:

Press and hold the backup release valve to ensure the tool has reset.
Remove the battery pack.

Remove the jaws from the tool.
Use a soft mallet to tap the rear of the jaws to release.
Clean any dirt and debris from the blades before starting another cut.

MAINTENANCE

WARNING To reduce the risk of injury, always unplug the charger and remove the battery pack from the charger or tool before performing any maintenance. Never disassemble the tool, battery pack or charger. Contact a MILWAUKEE service facility for ALL repairs.

Maintaining Tool
Keep your tool, battery pack and charger in good repair by adopting a regular maintenance program. Inspect your tool for issues such as undue noise, misalignment or binding of moving parts, breakage of parts, or any other condition that may affect the tool operation. Return the tool, battery pack, and charger to a MILWAUKEE service facility for repair. After six months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE service facility for inspection.
If the tool does not start or operate at full power with a fully charged battery pack, clean the contacts on the battery pack. If the tool still does not work properly, return the tool, charger and battery pack, to a MILWAUKEE service facility for repairs.

ONE-KEY™
Refer to the ONE-KEY™ App for information regarding necessary servicing, such as internal battery life and crimp count.

WARNING: Chemical Burn Hazard. This device contains a lithium button/coin cell battery. A new or used battery can cause severe internal burns and lead to death in as little as 2 hours if swallowed or enters the body. Always secure the battery cover. If it does not close securely, stop using the device, remove the batteries, and keep it away from children. If you think batteries may have been swallowed or entered the body, seek immediate medical attention.

Internal Coin Cell Battery
An internal coin cell battery is used to facilitate full ONE-KEY™ functionality.

To replace the coin cell battery:

Remove the battery pack.
Remove the screw(s) and open the coin cell battery door.
Remove the old coin cell battery, keep it away from children, and dispose of it properly.

Insert the new coin cell battery (3V CR2032), with the positive side facing up.
Close the battery door and tighten the screw(s) securely.

Jaws and Blades
Inspect jaws for cracks or damage. Do not use dam-aged jaws. Replace the blades when they become dull, rounded, chipped, or damaged.

Hydraulic Fluid
To extend the life of the tool, return the tool to a MILWAUKEE service facility for hydraulic fluid re-placement after 20,000 cuts or 2 years of use.

WARNING: To reduce the risk of personal in- jury and damage, never immerse your tool, battery pack or charger in liquid or allow a liquid to flow inside them.

Cleaning
Clean dust and debris from any vents. Keep tool clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain clean-ing agents and solvents are harmful to plastics and other insulated parts. Some of these harmful agents include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools.

Repairs
For repairs, return the tool, battery pack and charger to the nearest authorized service center.

ACCESSORIES

WARNING: Use only recommended accessories. Others may be hazardous. For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor.

WIRELESS COMMUNICATION
For products provided with wireless communication features, including ONE-KEY™:
Pursuant to part 15.21 of the FCC Rules, do not modify this product. Modification could void your authority to operate the product. This device complies with part 15 of the FCC Rules and ISED-Canada’s license exempt RSS standards. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.

SERVICE – UNITED STATES
1-800-SAWDUST (1.800.729.3878) Monday-Friday, 7:00 AM – 6:30 PM CST
or visit www.milwaukeetool.com

Contact Corporate After Sales Service Technical

Support with technical, service/repair, or warranty questions.
Email: metproductsupport@milwaukeetool.com

Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases.

SERVICE – CANADA
Milwaukee Tool (Canada) Ltd
1.877.948.2360
Monday-Friday, 7:00 AM – 4:30 PM CST
or visit www.milwaukeetool.ca

LIMITED WARRANTY

USA & CANADA
This MILWAUKEE power tool* is warranted to the original purchaser from an authorized MILWAUKEE distributor only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on this power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of five (5) years after the date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, altera-tions, abuse, normal wear and tear, lack of maintenance, or accidents. Normal Wear: Many power tools need periodic parts replacement and service to achieve best performance. This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, chucks, brushes, cords, saw shoes, blade clamps, o-rings, seals, bum-pers, driver blades, pistons, strikers, lifters, and bumper cover washers. *This warranty does not cover battery packs or all power tools. Refer to the separate and distinct warranties available for those products. The warranty period for the LED in the LED Work Light (49-24-0171) and the LED Upgrade Bulb (49-81-0090) is the lifetime of the product subject to the limitations above. If during normal use the LED or LED Upgrade Bulb fails, the part will be replaced free of charge.

Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product. The manufacturing date of the product will be used to determine the warranty period if no proof of pur-chase is provided at the time warranty service is requested. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSE-QUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOTALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WAR-RANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WAR-RANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTYAS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Service Center Search’ in the Parts & Service sec-tion of MILWAUKEE’s website www.milwaukeetool.com or call 1.800. SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE power tool.