AIRZONE AZAI6WSCGG3 Support Aidoo Wi-Fi Control Instruction Manual

AIRZONE AZAI6WSCGG3 Support Aidoo Wi-Fi Control

Product Usage Instructions

Connection and Setup

1. Ensure the device is within the Wi-Fi range.
2. Power the device using the recommended voltage range (12 – 16 V).
3. Download and install the Airzone Cloud App on your iOS or Android device.
4. Follow the in-app instructions to connect the device to your Wi-Fi network.

Remote Control

• You can remotely manage and integrate units using the Airzone Cloud App.
• Make sure you are connected to the internet to access the remote control features.

Troubleshooting

• If you encounter any issues with the device, refer to the user manual for troubleshooting steps.
• For further assistance, contact customer support.

FAQ

• Q: What should I do if the device is not connecting to Wi-Fi?
• A: Check if the device is within the Wi-Fi range and that you have entered the correct network credentials. Restart the device and try reconnecting.
• Q: How can I reset the device?
• A: To reset the device, locate the reset button and hold it for 10 seconds. The device will restart and reset to factory settings.
• Q: Can I use the device with other compatible units?
• A: Yes, the AIDOO WI-FI GG3 is designed to work with other compatible units. Refer to the user manual for more information on compatibility.

AIDOO WI-FI GG3

Device to manage and integrate units remotely from the Cloud. Online control with the “Airline Cloud” App (available for iOS and Android). Wireless Wi-Fi connection. Externally powered by the indoor unit.

Features

• Control of the parameters of the unit.
• Communication errors detection.
• Temperature and operating mode time schedules.
• Multi-user and multi-session.
• Port for integration via Modbus protocol.

For further information about our products, go to airzonecontrol.com.

TECHNICAL SPECIFICATIONS

• Type of power supply: Vdc
  • V max 18 V
  • I max 137.5 mA
  • V in 12 – 16 V
• Consumption: 0.85 W
• Type of cable: Conector GG3
  • GG3 connector
  • Conector GG3
• Wire length: 2.5 m (8.2 ft)

WI-FI Communication

• Protocol: WI-FI – CERTIFIED TM 802.11b/g/n (802.11n up to 150 Mbps)
• Model: ESP-WROOM-32
• Communication frequency: 2.4 GHz
• Maximum power – Antenna power: 20 dBm
• Sensitivity: – 97 dBm
• IP address: DHCP

Bluetooth Communication

• Protocol: Bluetooth v4.2 BR/EDR and BLE specification
• Bluetooth class: Class-1, class-2 and class-3 transmitter

RS-485 Port

• Shielded twisted pair: 2 x 0.22 + 2 x 0.5 mm2 (AWG 23 – 2 wired + AWG 20 – 2 wired)
• Communication protocol: RS-485 Par – 19200 bps

Operating temperatures

• Storage: – 20 … 70 ºC (- 4 … 158 ºF)
• Operation: 0 … 45 ºC (32 … 113 ºF)
• Operating humidity rango: 5 … 90 % (non-condensing)

Mechanical aspects

• Protection class: IP 41
• Weight: 130 g (0.29 lb)

Dimensions

• Check the indoor units compatible:

FCC / ISED

• This device complies with FCC / ISED regulatory notices.

DEVICE ELEMENTS

Nº Description

1. Cable GG3
2. RS-485 port
3. Indoor unit port
4. Device reboot
5. Association process reset
6. Power supply
7. External power input

SELF-DIAGNOSIS

Nº	Significado / Meaning / Significado
	Connecting to WI-FI network	Blinking	Green
	Connected to WI-FI network	Steady
	Connected to the server	Steady	Blue
	Not configured	Off	–
	Cloud communication	Blinking	Red
	Microprocessor activity	Blinking	Green
	Power supply	Steady	Red
	Data transmission to the indoor unit	Blinking	Red
	Data reception from the indoor unit	Blinking	Green

ASSEMBLY AND CONNECTION

Important: Wired controller required XK46 or equivalent. The unit controller must remain working in parallel with your Aidoo.

1. Perform the assembly following the next step:
   • Screw attachment.
   • Double-sided adhesive attachment.
2. Disconnect the indoor unit.
3. Connect the Aidoo to the terminals of the indoor unit using the supplied number cable, H1 and H2.
4. Connect the Aidoo to power supply. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
5. Download the app and follow the steps bellow for its setting. Access the support section to see the user manual.

Important: The equipment shall be supplied by a limited power source meeting class PS2 of the standard IEC 62368-1.

Documents / Resources

AIRZONE AZAI6WSCGG3 Support Aidoo Wi-Fi Control [pdf] Instruction Manual AZAI6WSCGG3 Support Aidoo Wi-Fi Control, AZAI6WSCGG3, Support Aidoo Wi-Fi Control, Wi-Fi Control, Control

References

• User Manual