FSBS120GY Bluetooth Speaker
User Manual
Preface
Thank you for purchasing the Nedis FSBS120GY.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
The Nedis FSBS120GY is a Bluetooth speaker which plays audio from your media device.
Intended use
This device is intended as an audio player.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
|
Product
|
Bluetooth® speaker
|
|
Article number
|
FSBS120GY
|
|
Dimensions (l x w x h)
|
121 x 150 x 107 mm
|
|
Weight
|
738 g
|
|
Channels
|
Stereo via TWS
|
|
RMS audio output
|
2 x 5 W
|
|
Peak audio output
|
2 x 15 W
|
|
Sensitivity
|
85 dB
|
|
Bluetooth frequency range
|
2402 – 2480 MHz
|
|
Bluetooth® version
|
V5.0 + EDR
|
|
Transmission distance
|
10 m
|
|
Maximum transmission power
|
2 dBm
|
|
Maximum antenna gain
|
1 dBi
|
|
Battery type
|
Lithium-ion (18650)
|
|
Battery capacity
|
1200 mAh
|
|
Charging input power
|
5 V / 1 A
|
|
Charging time
|
± 3 hours
|
|
Playback / talk time
|
Up to 4 hours
|
|
Driver unit
|
Ø 52 mm
|
|
Impedance
|
4 Ω
|
|
Frequency response
|
100 Hz – 16 KHz
|
Parts list (Image A)
 |
|
A
|
|
1. Speaker
|
|
2. Power button
|
|
3. Bluetooth indicator LED
|
|
4. Micro USB port
|
|
5. Status indicator LED
|
|
6. Audio port (3.5mm)
|
|
7. Micro USB cable
|
Safety instructions
WARNING
- Only use the product as described in this manual.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
- Do not immerse the product in water.
- Do not charge when the product is wet.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to direct sunlight, naked flames or heat.
- Disconnect the product from the electrical outlet and other equipment if problems occur.
Installation
- Check the contents of the package
- Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Use
Power supply (Image B)
 |
|
B
|
1. Plug the micro USB cable B1 into the micro USB port of the product B3.
2. Plug the other end of the micro USB cable B1 into a USB power adapter to charge the product.
- The charging indicator LED B4 lights up red when charging.
- The charging indicator LED B4 stops lighting up when charging is complete.
Pair with one speaker
1. Hold the power button A2 for 2 seconds to switch on the product.
- The Bluetooth indicator LED A3 starts flashing to indicate pairing mode is active.
2. Activate Bluetooth on your audio source and connect with the product (FSBS120).
3. If asked, enter the pairing code ‘0000’.
- The Bluetooth indicator LED A3lights up to indicate successful pairing.
Pair with both speakers
1. Hold the power button A2 on both speakers for 2 seconds to switch them on.
- After a few seconds, one of the two speakers emits a tone to indicate that it is paired with the other speaker.
- The Bluetooth indicator LED A3 lights up on of the speakers to indicate it is ready to pair with an audio source.
- If pairing between the speakers fails, double press the power button A2 to retry.
2. Activate Bluetooth on your audio source and connect with the product (FSBS120).
- If the speakers are correctly paired to each other, only one of them emits a Bluetooth signal.
- In case you see two signals, retry pairing the speakers to each other.
3. asked, enter the pairing code ‘0000’.
Connect with audio cable (Image B)
- Audio cable is not included.
To pair the audio source to the product using an audio cable, follow these steps:
1. Hold the power button A2 for 2 seconds to switch on the product.
2. Plug the audio cable B2 into the audio port B5 to connect the product to your media device.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Troubleshooting
|
Problem
|
Possible cause
|
Solution
|
|
The product does not switch on.
|
The batteries are drained.
|
Charge the product for at least 30 minutes and retry.
|
|
Audio source cannot pair with the product.
|
The audio source does not support A2DP.
|
Choose an audio source that supports A2DP.
|
|
Lost Bluetooth connection.
|
Navigate to Bluetooth settings on your audio source, tap FSBS120 and select “Forget”.
Restart both devices and try again.
|
|
|
No sound is coming from the product.
|
The product is not connected or paired to the audio source.
|
Connect the product to the audio source with an audio cable (not included) or pair with Bluetooth.
|
|
The product is too far out of reach from the audio source.
|
Bring the product and the audio source closer together.
|
|
|
The audio source volume is too low/muted.
|
Raise the volume of the audio source.
|
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
 |
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
|
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product FSBS120GY from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/FSBS120GY#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
