BC 10.0 WR
BC 10.0 WL
INSTRUCTION MANUAL
BC 10.0 WR Wired Sigma Sport Bike Computer
VIDEOS &FURTHER INFORMATION
FIRST START
Battery already installed
INSTALLATION
BC 10.0 wired 1 + 2 + 3 BC 10.0 WR |
BC 10.0 wireless 3 + 4 + 5 + 6 BC 10.0 WL |
1 Cable mount Art.-Nr. 00530 |
2 Magnet Art.-Nr. 00537 |
3 Cable ties | 4 Speed transmitter Art.-Nr. 00540 |
5 Mount Art.-Nr. 00534 |
6 Power Magnet Art.-Nr. 00538 |
INSTALLATION MOUNT
INSTALLATION WIRED SPEED SENSOR
WIRED
INSTALLATION WIRELESS SPEED TRANSMITTER
TECHNICAL DATA
Computer WIRED:
– Battery type: CR 2032, 3V
– Battery life: 3 years
(When used for 1 hour per day)
Computer WIRELESS:
– Battery type: CR 2032, 3V
– Battery life: 2 years
(When used for 1 hour per day)
Transmitter:
– Battery type: CR 2032, 3V
– Battery life: 1.5 years
(When used for 1 hour per day)
EU-DECLARATION OF CONFORMITY
We, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15, D-67433 Neustadt/Weinstraße declare under our responsibility that the product BC 10.0 WR are compliant with the essential requirements of the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. The declaration of conformity can be found at:
ce.sigmasport.com/bc100wr
We, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15, D-67433 Neustadt/Weinstraße declare under our responsibility that the product BC 10.0 WL and the transmitter ATS2021 are compliant with the essential requirements and other relevant requirements of theRED Directive 2014/53/EU and the RoHS Directive 2011/65/EU. The declaration of conformity can be found at: ce.sigmasport.com/bc100wl
LEGAL STATEMENTS
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
Caution: If any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
The grantee is not responsible for any changes or modifi cations not expressly approved by the party responsible for compliance. Such modifi cations could void the user’s authority to operate the equipment.
The RF Exposure Compliance distance is 5 millimeters.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
− Reorient or relocate the receiving antenna.
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
− Consult the dealer or an experienced radio/TV technician for help.
FCC ID ATS2021: M5LATS2021
INDUSTRY CANADA STATEMENT
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 5 millimeters between the radiator and your body.
UKCA STATEMENT
Wireless Model
We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards, in accordance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The test record, data evaluation and Equipment Under Test (EUT) confi gurations represented herein are true and accurate under the standards herein specifi ed.
Wired Model
We, SIGMA-ELEKTRO GmbH, declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards, in accordance with the Electromagnetic Compatibility Regulations 2016 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The test record, data evaluation and Equipment Under Test (EUT) confi gurations represented herein are true and accurate under the standards herein specifi ed.
CE INFORMATION
You can fi nd the CE declaration at:
ce.sigmasport.com/bc100wr
ce.sigmasport.com/bc100wl
FUNCTIONS / SETTINGS
BUTTON OVERVIEW
MENU BASIC BIKE FUNCTIONS
DISPLAY OVERVIEW
SETTINGS MENU
CHOOSE YOUR SPECIFIC WHEEL SIZE
mm | inch | |
16″ | 1253 | 49,3 |
18″ | 1411 | 55,6 |
20″ | 1590 | 62,6 |
22″ | 1770 | 69,7 |
24″ | 1907 | 75,1 |
26″ | 2085 | 82,1 |
27″ | 2195 | 86,4 |
27.5″ | 2180 | 85,8 |
28″ | 2200 | 86,6 |
29″ | 2300 | 90,5 |
700C | 2095 | 82,5 |
EXAMPLE OF SETTING PROCEDURE:
- Open settings: Press and hold S button > 3 sec. until settings open.
- Choose the relevant page: Press M button until desired value is displayed.
- Open submenu: Press 1x S button.
- Change value: Press M button until desired value is displayed.
- Confi rm choosen value: Press 1x S button.
Note: Do steps No. 4 and No. 5 until the submenu is closed „Set Ok“.
You are now back in the Settings Menu. - Close settings: Press and hold S button > 3 sec.
BATTERY CHANGE
BC 10.0 WR/WL
SPEED TRANSMITTER (BC 10.0 WL)
SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
67433 Neustadt/Weinstraße, Germany
kundenservice@sigmasport.com
Documents / Resources
SIGMA BC 10.0 WR Wired Sigma Sport Bike Computer [pdf] Instruction Manual BC 10.0 WR, Wired Sigma Sport Bike Computer, Sport Bike Computer, Wired Sigma Bike Computer, Bike Computer, Computer |
References
- ce.sigmasport.com/bc100wl
- ce.sigmasport.com/bc100wr
- SIGMA SPORT - Bike Computer, Bike Lights, Data World
- User Manual