ware cares-LOGO

Ware cares 16404 Cat Furniture

ware-cares-16404-Cat-Furniture-PRODUCT

Specifications

  • Brand: Ware Pet Products
  • Product Name: Kitty-Quick TM
  • Model Number: #30016404 (beige), #30016405 (gray)
  • Assembled Dimensions: 24″ x 20″ x 49.5″ (H)

Parts Included

  • 1 – Allen Wrench (#6426)
  • 1 – Base Unit
  • 1 – Oval Bed
  • 2 – Hex Bolts (#6422)
  • 2 – 14 Posts
  • 2 – Double Threaded Bolts (#6424)

Assembly Tips

ware-cares-16404-Cat-Furniture-FIG-1

  • Avoid over-tightening the hex bolts as this can cause the bolt threads to become stripped and result in less secure part connections.
  • Assemble your cat furniture on a flat, level surface.
  • In case of frayed fibers  on the carpets exposed edges, trim with a pair of scissors to remove.
  • Vacuum your cat tree prior to initial use to remove any packaging debris.

Warnings and Cautions
Please follow all warnings and instructions listed below to avoid injury to pets or property damages.

  • This cat furniture is for cat use only; please keep children away.
  • Keep small parts away from pets/children to avoid choking hazards.
  • Do not step, shake, rock, climb on or hang onto the cat furniture.
  • Cat furniture belongs indoors, away from wet areas and direct sunlight.
  • Place your cat furniture on a flat, level surface. Preferably against a wall or in a corner for stability.
  • If your cat furniture becomes torn or damaged, please discard.
  • The product pitcured here may vary slightly from your cat furniture, as this product is continually being improved.

Assembly Steps

Step 1: Attaching the Posts to the Base Unit
Using the two Double Threaded Bolts, attach the two 14 Posts to the prebuilt base unit. (see figure 1)

Figure 1
Step 2: Attaching the Oval Bed

  1. Using the Allen Wrench and the two Hex bolts, attach the Oval
  2. Bed to the two 14 Posts. (see figure 2)

Care Tips
To keep your Kitty-Quick TM in good condition, follow these care tips. Vacuum fur when necessary and spot clean stains using luke warm water. Over time the carpet on your cat furniture may begin to show signs of wear. Periodically examine your cat furniture for areas of repetitive use which can result in fraying of the carpet and/or the jute rope. Use scissors to trim off the damaged areas.

  • Vacuum fur when necessary.
  • Spot clean stains using lukewarm water.
  • Periodically examine your cat furniture for areas of repetitive use which can result in fraying of the carpet and/or the jute rope.
  • Use scissors to trim off the damaged areas of the carpet or jute rope.

Using the two Double Threaded Bolts, attach the two 14” Posts to the prebuilt base unit. (see figure 1)

ware-cares-16404-Cat-Furniture-FIG-2
Using the Allen Wrench and the two Hex bolts, attach the Oval Bed to the two 14” Posts. (see figure 2)

ware-cares-16404-Cat-Furniture-FIG-3

If you have any questions or concerns about this product contact our customer service department at 1-800-295-2243 Mon-Fri 8:00 – 4:00 MST or email us at hello@warepet.com

Documents / Resources

ware cares 16404 Cat Furniture [pdf] Instructions
16404 Cat Furniture, 16404, Cat Furniture, Furniture

References

Leave a comment

Your email address will not be published. Required fields are marked *