BISSELL-logo

BISSELL 2306Y CrossWave Pet All in One Multi Surface Cleaner

BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-product

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING YOUR CROSSWAVE PET.
When using an electrical appliance, basic precautions should be caused, including the following.

WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

  • Connect to a property-grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug
  • Do not leave the appliance when it is plugged in. Unplug from the outlet when not in use and before servicing
  • Use indoors only.
  • Do not allow to be used as a toy. Close attention is necessary when lised by or near children.
  • Do not use it for any purpose other than described in this User’s Guide. Use only the manufacturer’s recommended attachments.
  • Do not use a damaged cord or plug. If the appliance is not working as it should or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
  • Do not pull or carry by cord, use the cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
  • Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
  • Do not handle plugs or appliances with wet hands.
  • Do not put any object into openings. Do not use any opening blocked, keep openings free of dust, lint, hair, and anything that may reduce air flow.
  • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
  • Turn off all controls before plugging or unplugging the appliance.
  • Use extra care when deaning on stairs.
  • Do not use to pick up flammable or combustible materials (lighter Nuid, gasoline, kerosene, etc.) or use in areas where they may be present.
  • Do not use the appliance in an enclosed space filled with vapors given off by oil base paint, paint thinner, some moth-proofing
  • substances, flammable dust, or other explosive or toxic vapors.
  • Do not use to pack up toxic: material (chlorine bleach, ammonia, drain cleaner, etc.).
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Use only BISSELL deaning products intended for use with this appliance to prevent internal component damage See the Cleaning Fluid section of this guide.
  • Do not immerse. Use only on surfaces moistened by the deaning process.
  • Keep the appliance on a level surface.
  • Do not carry the appliance while in use.
  • Always install float before any wet pick-up operation.

SAVE THESE INSTRUCTIONS FOR FUTURE USE
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

WARNING
Risk Of Injury. Brush May Start Unexpededy. Unplug Before Cleaning or Serving.

WARNING
To Reduce The Risk Of Injury From Moving Parts – Unply) Before Servicing,

WARNING
Improper connection of the equipment grounding condor can result in a risk of electrical shock. Check with a qualified electrician or service person if you arent sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. I it will not fit the outiet, have a proper audit installed by a qualified electrician. his appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the istration. Make certain that the appliance is conneded to an outlet having the same configuration as the ping. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wring system. It A should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment grounding conducor and a grounding plug. It must only be plugged into an outlet that is property-installed and grounded by all local codes and ordinancesBISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-15

Thanks for buying a BISSELL CrossWave® Pet
We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your multi-surface cleaner works as well in two years as it does today, so this guide has tips on using (pages 6-8), maintaining (pages 9-13), and if there is a problem. troubleshooting (page 14). Your multi-surface cleaner needs a little assembly before you can put it to work, so flip to page 5 and let’s get started!

What’s In The Box?

BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-1

NOTE: Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap.

Getting to Know Your CrossWave Pet

BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-2

  1. Upper Handle
  2. SmartClean Fingertip Controls
  3. Strainer
  4. Float Stack
  5. Easy Remove Brush Window
  6. Integrated Carry Handle
  7. Dirty Water Tank
  8. Foot
  9. Solution Spray Trigger
  10. Quick Release Cord Wrap
  11. Clean Water Tank
  12. Lower Cord Wrap
  13. Rinse Cup
  14. Rinse and Storage Tray

Your BISSELL Cross Wave Pet machine comes in three easy to assemble components and does not require any tools to assemble. The unit also comes with a three-piece Rinse and Storage Tray.

  • Handle
  • Body
  • Clean Water Tank
  • Rinse and Storage Tray
  • Brush Roll Drying Tray with Rinse Cup

Assembly

WARNING
Do not plug in your Cross Wave* Pet until you are familiar with all Instructions and operating proceduresBISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-3

NOTE: To easily unwrap the cord for use, just turn the quick-release cord wrap downward to remove the cord from the cord wrap

Cleaning Formulas

WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the hard floor device.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-4

Filling Your Clean Water Tank

BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-5

A few notes about filling the clean water tank:

  • Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE.

Cleaning Your Hard Floors

BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-6

  • TIP: When cleaning excessively dirty or muddy hard floors or if your brush roll looks dirty, use the easy clean storage tray to rinse your brush roll before cleaning your area rugs.
  • TIP: For overly challenging and stuck-on messes on your hard floors, activate the RUG mode and hold your CrossWave* Pet over the mess. Using short passes while holding the trigger allows the multi-surface brush to go to work.

Cleaning Area Rugs

NOTE: Before cleaning area rugs, test an inconspicuous area of the rug for colorfastness. Also, please check the manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. Not for use on silk or delicate area rugs.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-7

NOTE: The RUG button dispenses twice the solution of the HARD FLOOR button to help with area rug cleaning
NOTICE: Do not over wet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure.

Maintenance: Rinse and Storage Tray

WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-8

Maintenance: Rinse and Storage Tray (cont.)

WARNING
To reduce the risk of fire, electric shock, or injury, turn the power OFF and disconnect the plug from the electrical outlet before performing maintenance or troubleshooting.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-9

Machine Storage
Put the unit away in a closet or basement until the next use. Store cleaner in a protected, dry area.

  • NOTE: Any solution remaining in the clean water tank should be emptied before machine storage.
  • NOTICE: To reduce the risk of a leaking condition, do not store units where freezing may occur. Damage to internal components may result.

Maintenance: Dirty Water Tank

WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-10

WARNING
To reduce the risk of fire, electric shock or Injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-11

Maintenance: Brush Roll and Chamber

WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-12

TIP: The trigger should not be press a wet brush rol will help the brush roll dry raster.
NOTE: The brush roll is not dishwasher or automatic washing machine safe. Please follow cleaning instructions above.BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-13

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from the electrical outlet before performing maintenance or troubleshooting checks.

BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-14

Warranty

If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL. Consumer Care by E-mail or telephone as described below.

Limited Three-Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL will repair or replace (with new. refurbished, lightly used, or remanufactured components or products), at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for three years any defective or malfunctioning part See information below on “If your BISSELL product should require service”. This warranty applies to product used for personal, and not commercial or rental, service. This warranty does not apply to fans or routine maintenance components such as filters, belts. or brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User’s Guide is not covered. This warranty will only be valid if the product is used in the same country in which it was sold.

BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL. NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. “EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE THREE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE

NOTE: Please keep your original sales receipt. It provides proof of the date of
purchase in the event of a warranty claim.
Service

If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty. contact BISSELL Consumer Care.

Website:
www.BISSELL.ca/service-centers

E-mail:
www.BISSELL.ca/email-us

Call:
BISSELL Consumer Care 1-800-263-2535 Monday – Friday 8am – 10pm ET Saturday 9am – 8pm ET Sunday 10am – 7pm ET

Register your product today!
Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive:

Faster Service
Supplying your information now saves you time should you need to contact us with questions regarding your product.

Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts

Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!

Visit us online at: BISSELL.ca When contacting BISSELL, have model number of cleaner available.

Please record your

  • Model Number:
  • Please record your
  • Purchase Date:

NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty clalm. See the Warranty page for detalls.

Parts & Supplies
For Parts and Supples, go to BISSELL.ca and enter your model number in the search field.We really do read your comments, tweets, and posts. Rate this product on BISSELL.ca or any of our retailer sites and let us (and millions of your closest friends) know what you think!

For cleaning tips and more visit www.BISSELL.ca or find us at:BISSELL-2306Y-CrossWave-Pet-All-in-One-Multi-Surface-Cleaner-fig-16

 

 

Documents / Resources

BISSELL 2306Y CrossWave Pet All in One Multi Surface Cleaner [pdf] User Manual
2306Y CrossWave Pet All in One Multi Surface Cleaner, 2306Y, CrossWave Pet All in One Multi Surface Cleaner, All in One Multi Surface Cleaner, Surface Cleaner

References

Leave a comment

Your email address will not be published. Required fields are marked *