Husqvarna-LOGO

Husqvarna 535 AWD Automower Carls Mower and Saw

Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-1

Product Information

Specifications:

  • Model: QG_P25_535 AWD_1142323
  • Maximum Operating Range: 3m / 10ft
  • Battery Life: 35cm / 14 min
  • Operating Height: 1.5m / 5ft
  • Battery Charging Time: 2m / 7ft
  • Boundary Cable Length: Adjustable

Product Usage Instructions

Placement of Boundary Cable and Guiding Cable

  • Step 1: Lay the boundary cable to form a loop around the working area, maintaining the minimum distance from obstacles as shown in Figure B.
  • Step 2: Position the guiding cable under the charging station and extend it at least two meters straight from the front edge of the station.

Connection of Boundary Cable and Guiding Cable

  • Step 1: Lay the guiding cable under the charging station and pull it at least two meters from the front edge of the station in a straight line.
  • Step 2: Connect the guiding cable to the boundary cable using the provided joints. Press the joints together firmly with pliers to ensure a secure connection.

Starting and Stopping

  • START: Follow the product instructions for starting the device and setting it in motion.
  • STOP: Press the STOP button to halt operation.

Maintenance
Regularly check and clean the device to ensure optimal performance. Refer to the maintenance section in the manual for detailed instructions.

Frequently Asked Questions (FAQ)

How do I adjust the cutting time based on grass growth?
Utilize the seasonal timer function to allow the robot mower to automatically adjust the cutting time according to grass growth.

Placement of and connecting the charging station

  1. Place the charging station at a central position in the work area, with a lot of open space in front of the charging station and on a relatively horizontal surface.
  2. Connect the power supply’s low voltage cable to the charging station and the power supply.
  3. Connect the power supply to a 100-240 V wall socket.
  4. Place the robotic lawn mower in the charging station to charge the battery while the boundary wire is laid. Start the product.

    Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-2

Placement of the boundary wire and the guide wire

  1. Lay the boundary wire so that it forms a loop around the working area. For minimum distance to obstacles and islands, refer to illustration B.
  2. Make an eyelet at the point where the guide wire will later be connected.
  3. Run the guide wire to the point on the boundary loop where the connection will be made. Avoid laying the wire at tight angles.

    Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-3

Connecting the boundary wire and the guide wire

  1. Narrow passages in the yard make it difficult for the robotic lawn mower to find the charging station. The robotic lawn mower can be lead to remote areas using the guide wire. The guide wire also helps the robotic lawn mower to quickly find the charging station.
  2. Lay the guide wire under the charging station and at least 2 m / 7 ft straight out from the front edge of the charging station.
  3. Open the connectors and lay the wire ends in the recesses on each connector.
  4. Press the connectors together using a pair of pliers.
  5. Cut off any surplus boundary wire. Cut 1-2 cm / 0.4-0.8” above the connectors.
  6. Press the connectors onto the contact pins, marked AL
  7. (left) and AR (right), on the charging station. It is important that the right-hand wire is connected to the right-hand contact pin, and the left-hand wire to the left-hand pin. Fasten the connector to the contact pin marked G1 on the charging station. Use the same method for additional guide wire.

    Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-4

Connecting the guide wire to the boundary wire

  1. Cut the boundary wire with a wire cutters at the centre of the eyelet that was made in step B.2
  2. Connect the guide wire to the boundary wire using the accompanying couplers. Press the couplers completely together with a polygrip.

    Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-5

Starting and stopping

STARTING

  1. Push the START button.
  2. Push the ON/OFF button.
  3. Log in to the Automower® Connect app and follow the instructions.

STOPPING
Push the STOP button.

Adjusting the robotic lawn mower to suit the size of your lawn

  • The mowing results depend on the mowing time. Adjust the mowing time to suit your yard using the Schedule function. You decide what times during the day the robotic lawn mower is to work.
  • Use the Weather Timer function and the robotic lawn mower will automatically adjust the mowing time to the growth of the grass.

Maintenance

  • Push the ON/OFF button for 3 seconds to disable the product and check that the indicator lamp on the button is not lit before all work on the robotic lawn mower’s chassis, such as cleaning or replacing the blades. Replace the blades regularly for the best mowing result.
  • Never use a high-pressure washer or running water to clean the robotic lawn mower. Never use solvents for cleaning. Clean the product with a brush.
  • All connections to the charging station (power supply, boundary and guide wire) must be disconnected if there is a risk of a thunderstorm.
  • Fully charge the battery at the end of the season before winter storage.
    For more information and instructions, read the complete Operator’s manual in the Automower® Connect app or on www.husqvarna.com

LED INDICATOR

Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-6

Green solid light

Good boundary loop signal.

Green flashing light

ECO mode is activated.

Blue flashing light Malfunction in the boundary loop.
Red flashing light Malfunction in the charging station’s antenna.
Red solid light

Fault in the circuit board or incorrect power supply in the charging station. The fault should be rectified by an authorized service technician.

APP CONNECTIVITY

  1. Automower® Connect
    • Download the Automower® Connect app from AppStore or GooglePlay.
    • Sign up and specify an e-mail adress and a password to create a Husqvarna account.C. Log in to your Husqvarna account in the app.
    • Select My mowers in the Automower® Connect app, and then select the plus sign (+).
    • Follow the instructions in the app.

      Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-7

  2. Connectivity
    • Long-range cellular connectivity.
    • Short-range Bluetooth® connectivity.
    • Device tracking (GPS).

      Husqvarna-535-AWD-Automower-Carls-Mower-and-Saw-FIG-8

WEB: www.husqvarna.com

Documents / Resources

Husqvarna 535 AWD Automower Carls Mower and Saw [pdf] User Guide
535 AWD Automower Carls Mower and Saw, 535 AWD, Automower Carls Mower and Saw, Carls Mower and Saw

References

Leave a comment

Your email address will not be published. Required fields are marked *