Bauknecht WMT6513CC Washing Machine Quick Guide
In order to receive more complete assistance, please register your product on www.bauknecht.eu/register
Before using the appliance carefully read the Safety Instructions
Before using the machine, it is imperative that the transport bracket is removed. For more detailed instructions on how to remove it, see the Installation Guide.
CONTROL PANEL
- Program selector
- The “Start/Pause“ button
- The “Reset/Drain“ button
- “Temperature“ button
- The “Start delay“ button
- Child lock combination
- “Spin“ button
- Time
- Temperature
- Washing phase
INDICATORS
- In the event of any failure, refer to the “TROUBLESHOOTING“ section
PROGRAMME CHART
Eco 40-60 – Test wash cycle in compliance with 2019/2014 regulations. The most efficient program in terms of energy and water consumption for washing normally soiled cotton laundry. Display only: Spin speed values shown on the display can slightly differ from the values stated in the table
For all Test Institutes
Long wash cycle for cotton: set wash cycle Cotton with a temperature of 40°C. The synthetic program along set wash cycle Synthetics with a temperature of 40°C. This data may differ in your home due to changing conditions in inlet water temperature, water pressure, etc. Approximate program duration values refer to the default setting of the programs, without options. The values given for programs other than the eco 40-60 program are indicative only.
PRODUCT DESCRIPTION
- Lid handle
- Lid
- Control panel
- Detergent dispenser
- Drum
- Water filter – behind the cover
- Mobility lever (depending on model)
- Adjustable feet (x2)
After the program end and spins with maximum selectable spin speed, in the default program setting.
The duration of the program is shown on the display
The sensor technology adapts water, energy, and program duration to your wash load.
DETERGENT DISPENSER
Main wash compartment
Detergent for the main wash, stain remover, or water softener.
Prewash compartment
Detergent for the prewash.
Softener compartment
Fabric softener. Liquid starch. Bleach. Pour in softener, starch, or bleach solution only up to the “max” mark.
Release button 
Press to remove the tray for cleaning.
PROGRAMMES
For choosing the appropriate program for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen, synthetic fibers, and mixed fibers.
Eco 40-60
For washing normally soiled cotton garments declared to be washable at 40 °C or 60 °C, together in the same cycle. This is the standard cotton program and the most efficient in terms of water and energy consumption.
Cotton
Normally to heavily soiled and robust cotton.
Synthetics
For washing soiled garments made from synthetic fibers (such as polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
Delicates
For washing particularly delicate garments. Preferably turn garments inside out before washing.
Wool
All wool garments can be washed using the program ‚ “Wool“ even those carrying the “hand-wash only“ label. For best results, use special detergents and do not exceed max kg declaration of laundry.
Spin
Spins the load then empties the water. For robust laundry.
Rinse & Spin
Separate rinse and intensive spin program. For robust laundry.
Aqua saver
Lightly soiled laundry made of synthetic fibers, or synthetics mixed with cotton garments. Saving program with very low water consumption. Use liquid detergent and the lowest recommended amount for 2.5kg laundry. Do not use a softener.
Anti-stain
This program ensures maximum stain removal capacity with no need for pre-treatment at low temperatures, preserving fabrics and colors.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Sport
Normally soiled and sweaty sportswear is made of cotton jersey or microfibers. Includes a prewash cycle – you can add detergent also to the prewash chamber. Do not use a softener.
Rapid 30’
For washing lightly soiled garments quickly. This cycle lasts only 30 minutes, saving time and energy.
Colors
White and pastel-shaded garments made of delicate fabrics. Gentle wash program to avoid graying or yellowing of your laundry. Use heavy-duty detergent, if necessary also stain removers or bleaches on an oxygen basis. Do not use liquid detergent.
FIRST TIME USE
To remove any manufacturing debris select the “Cotton“program at a temperature of 95°C. Pour a small quantity of detergent powder into the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity the detergent manufacturer recommends for lightly soiled laundry). Start the program without adding any laundry.
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS AND TIPS“ section. Load the laundry, close the drum door, and check that it is closed properly. Pour in the detergent and any additives. Observe the dosing recommendations on the detergent pack. Close the lid. Turn the program selector to the desired program and select any option if needed. The display shows the duration of the selected program (in hours and minutes), and the indicator for the “Start/Pause“ button flashes. The temperature and spin speed can be changed by pressing the “Temperature“ button or the “Spin“ button. Open the tap and press the “Start/Pause“ button to start the wash cycle. The “Start/Pause“ indicator will light up and the door will be locked. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain program phases. If this is the case, an animation appears on the time display.
PAUSE OR CHANGE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause“ button, and the indicator light blinks. Select any new program, temperature, options, or spin speed if you wish to change those settings. Press the “Start/Pause“ button again to start the wash cycle from the point at which it was interrupted. Do not add detergent to this program.
LID OPEN INDICATOR
Before starting and after the end of a program, the “Lid open“ indicator lights show that the lid can be opened. As long as a wash program is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running program, for example, to add more laundry, or to remove laundry which was loaded by mistake, press the “Start/Pause“ button. If the temperature is not too high, the “Lid open“ indicator light turns on. It may last a while until you can open the lid. Press “Start/Pause“ to proceed with the program again.
PROGRAMME END
The “Lid open“ indicator lights up and the display shows. Turn the program selector to the “O“ position and close the water tap. Open the lid and drum and unload the machine. Leave the Lid open for some time to allow the interior of the machine to dry. After about a quarter of an hour, the washing machine will switch off completely to save energy. To cancel a running program before the end of a cycle, press the “Reset/Drain“ button for at least 3 seconds. The water is drained out. It may last a while until you can open the lid.
OPTIONS
- When the combination of the program and additional option(s) is not possible, the indication lights switch off automatically.
- Unsuitable combinations of options are deselected automatically.
15 ° Green & clean
Saves energy used for water heating while maintaining a good wash result. Supports color maintenance when washing colored laundry. Recommendable for lightly soiled laundry without stains. Make sure that your detergent is suitable for cold-wash temperatures.
Rapid
Enables quicker washing by shortening the program duration. Recommendable for small loads or only lightly soiled laundry.
Temperature
Every program has a predefined temperature. If you want to change the temperature, press the “Temperature“ button. The value appears on the display.
Easy Ironing
By selecting this option, the wash and the spin cycles will be modified in order to reduce the formation of creases.
Start delay
To set the selected program to start at a later time, press the “Start delay“ button to set the desired delay time. The lamp for the “Start delay“ option button lights up, and it goes off when the program starts. Once having pressed the “Start/Pause“ button, the countdown of the time delay begins. The number of hours pre-selected can be reduced by pressing the “Start delay“ button again. Do not use liquid detergent when activating this option. To cancel the “Start delay“ turn the program selector to another position.
Prewash
Only for heavily soiled loads (for example sand, granular dirt). Increases the cycle time by approximately 15 min. Do not use liquid detergent for the main wash when activating the Prewash option.
Intensive rinse
Helps to avoid detergent residues in the laundry by extending the rinse phase. Particularly suitable for washing baby laundry, for people suffering from allergies, and for areas with soft water.
Soil Level
It is an option working on 3 different levels (lightly soiled, normally soiled, heavily soiled) that are specially designed to set the right washing action, depending on your cleaning needs:
Heavily soiled: this option is designed for high levels of dirtiness, removing the most stubborn stains.
Normally soiled: this option is designed to remove everyday stains.
Lightly soiled: this option is designed to remove lightly soiled stains.
Spin (incl. Rinse hold)
Every program has a predefined spin speed. Press the button to set another spin speed. If you select spin speed “0”, the final spinning is canceled and the water is drained out only. However, intermediate spin phases remain during the rinse. If you select “Rinse hold”
, the laundry remains in the last rinse water without progressing to the final spin cycle, to avoid creasing and prevent colors from changing. To activate the “Rinse hold”, press the “Spin/ Rinse hold” button repeatedly until the “Rinse hold” symbol on the display lights up. The wash program stops to “Rinse hold” when the “Rinse hold” symbol on the display blinks; the light of the “Start/Pause” button also blinks. To terminate the “Rinse hold” by spinning the laundry, press “Start/Pause” – the laundry will be spun with the default spin speed. You can also select another spin speed with the “Spin/ Rinse hold” button before you start the spin cycle by pressing “Start/Pause”. To terminate the “Rinse hold” by draining the water without spinning, press the “Spin/ Rinse hold” button until spin speed “0” appears on the display; then press “Start/Pause” to start the draining. Do not leave the laundry to soak for too long in the “Rinse hold” (especially silk).
CHILD LOCK
You can lock the buttons of the control panel against improper use (e.g. by children). Press both of the child lock buttons simultaneously and hold them for at least 3 seconds. The key symbol 
on the display lights up. To unlock the buttons again proceed in the same way.
BLEACHING
Wash your laundry in the desired program, Cotton or Synthetics, adding an appropriate amount of chlorine bleach to the Softener chamber (close the lid carefully). Immediately after the end of the program, turn the “Programme selector” and start the desired program again to eliminate any residual bleach smell; if you want, you can add a softener. Never put both chlorine bleach and softener into the softener chamber at the same time.
HINTS AND TIPS
Sort your laundry according to the Type of fabric/care label (cotton, mixed fibers, synthetics, wool, handwash items). Color (separate colored and white items, wash new colored items separately). Delicates (wash small items – like nylon stockings – and items with hooks – like bras – in a cloth bag or pillow case with a zip).
Empty all pockets
Objects like coins or lighters can damage your laundry as well as the drum. Appliance interior If you never or seldom wash your laundry at 95°C, we recommend occasionally running a 95°C program without laundry, adding a small amount of detergent, to keep the interior of the appliance clean. Follow the dosage recommendation/additives It optimizes the cleaning result, it avoids irritating residues of surplus detergent in your laundry and it saves money by avoiding waste of surplus detergent Use low temperature and longer duration The most efficient programs in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the “PROGRAMME CHART” table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch off and unplug the washing machine. Do not use flammable fluids to clean the washing machine. Clean and maintain your washing machine periodically (at least 4 times per year).
Cleaning the outside of the washing machine
Use a soft damp cloth to clean the outer parts of the washing machine. Do not use glass or general-purpose cleaners, scouring powder, or similar to clean the control panel – these substances might damage the printing.
Detergent dispenser
Clean regularly, at least three or four times a year, to prevent detergent build-up: Press the release button to release the detergent dispenser and remove it. A small quantity of water can remain in the dispenser, thus you should carry it in an upright position. Wash the dispenser using running water. You can also remove the siphon cap on the back of the dispenser for cleaning. Replace the siphon cap in the dispenser (if removed) Reinstall the dispenser by locating the dispenser’s bottom tabs into the appropriate openings on the lid, and by pushing the dispenser against the lid until it locks into place. Make sure that the detergent dispenser is correctly reinstalled.
Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged, replace it with a new hose available through our After-Sales Service or your specialist dealer. Depending on the hose type: If the inlet hose has a transparent coating, periodically check if the color intensifies locally. If yes, the hose may have a leak and should be replaced. For water stop hoses 
(If available): check the small safety valve inspection window (see arrow). If it is red, the water stop function was triggered, and the hose must be replaced by a new one. For unscrewing this hose, press the release button (if available) while unscrewing the hose.
Cleaning the mesh filters in the water supply hose
Check and clean regularly (at least two or three times a year). Close the tap and loosen the inlet hose on the tap. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Now unscrew the inlet hose on the rear of the washing machine. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Refit the mesh filter and screw the inlet hose on again. Turn on the tap and ensure that the connections are completely water-tight.
Cleaning the water filter / draining residual water
The washing machine is provided with a self-cleaning pump. The filter keeps objects like buttons, coins, safety pins, etc. which have been left in the laundry. If you used a hot wash program, wait until the water has cooled down before draining any water. Clean the water filter regularly, to avoid the water cannot drain after the wash due to obstruction of the filter. If the water cannot drain, the indicator indicates that the water filter may be clogged.
Open the filter cover with a coin. Place a broad, flat container beneath the water filter, to collect the drain water. Slowly turn the filter counterclockwise until water flows out. Let the water flow out, without removing the filter. When the container is full, close the water filter by turning it clockwise. Empty the container. Repeat this procedure until all the water has drained. Lay a cotton cloth beneath the water filter, which can absorb a small amount of rest water. Then remove the water filter by turning it out anti-clockwise. Clean the water filter (remove residues in the filter and clean it under running water) and the filter chamber. Make sure the pump impeller (in the housing behind the filter) is not obstructed. Insert the water filter and close the filter cover: Reinsert the water filter again by turning it in a clockwise direction. Make sure to turn it in as far as it goes. To test the water tightness of the water filter, you can pour about 1 liter of water into the drum and check that water does not leak from the filter. Then close the filter cover.
Lid seal
Check the condition of the lid seal periodically and clean it from time to time with a damp cloth.
Recovering an object that falls between the drum and the tub
If an object accidentally falls between the drum and the tub, you can recover it thanks to one of the removable drum lifters. Unplug the washing machine. Remove the laundry from the drum. Close the drum flaps and turn the drum a half-turn (picture a). Using a screwdriver press on the plastic end, while sliding the lifter from left to right (picture b, c) by hand it will fall into the drum. Open the drum. You can recover the object through the hole in the drum. Refit the lifter from inside the drum: Position the plastic tip above the hole on the right side of the drum (pictured). Then slide the plastic lifter from right to left until it clips. Close the drum flaps again, turn the drum through half a turn, and check the positioning of the blade at all its anchorage points. Plug the washing machine in again.
TRANSPORT AND HANDLING
Pull out the mains plug, and close the water tap. Disconnect the inlet hose from the water tap, and remove the drain hose from your draining point. Remove all rest water from the hoses and washing machine and fix the hoses so that they cannot get damaged during transport. To facilitate moving the machine, pull the mobility lever situated at the bottom front (if available on your model) out a little by hand. Pull the washing machine out to the stop with the foot. Afterward, push the mobility lever back into the original stable position. Refit the transport bracket. Follow the instructions for removing the transport bracket in the INSTALLATION GUIDE in reverse order.
TROUBLESHOOTING
The washing machine may sometimes not work properly for certain reasons. Before calling the After-sales service, it is recommended to check to see if the problem can be easily resolved using the following list. Policies, standard documentation, ordering of spare parts, and additional product information can be found by:
| Anomalies: | Possible causes / Solution: |
|
The washing machine does not turn on and/ or programme does not start |
• The plug is not inserted into the electrical outlet, or not enough to make contact.
• There has been a power failure. • Lid is not properly closed. • The “Child lock“ function has been activated (if available). • The washing machine switched off automatically to save energy, before programme start or after programme end. To switch on the washing machine, turn the programme selector first to “Off/O” and then to the desired programme again. |
|
The wash cycle does not start. |
• The “Start/Pause“ button has not been pressed.
• The water tap is not open. • A “Start delay“ has been set. |
| Appliance stops during the programme, and the “Start/Pause“ light blinks | • “Rinse hold“ option is activated (if available).
• Programme has been changed – re-select desired programme and press “Start/Pause“ .). |
|
Appliance vibrates |
• The washing machine is not level.
• The transport bracket has not been removed; before using the washing machine, the transport bracket must be removed. |
| Final spin results are poor. The laundry is still very wet. “Spin/Drain“ indicator blinks, or the spin speed on the display blinks, or the spin speed indicator blinks after the end of the program – depending on the model | • Unbalance of the laundry load during spinning prevented the spin phase to avoid damages on the washing machine. This is why the laundry is still very wet. Reason for unbalance can be: small laundry loads (consisting of only few quite big or absorbent items, e.g. towels), or big/ heavy laundry items.
• If possible avoid small laundry loads. • “Spin“ button has been set to a low spin speed. |
The machine is indicating an error code (e.g. F-02, F-..) and/or “Call Service“ indicator lights up |
• Shut off the machine, disconnect the plug from the outlet, and wait about 1 minute before turning it back on.
• If the problem persists, call the After-sales service. |
“Water filter clogged“  indicator lights up |
• Waste water is not pumped out.
• Clean the water filter |
“No water“  indicator lights up |
• Appliance has no or insufficient water supply. |
|
“Detergent overdosage“ |
• The symbol will light up at the end of the programme if you used too much detergent.
• Too much foam is formed. • The detergent is not compatible with the washing machine (it must bear the wording “for washing machines“, “for hand washing and washing machines“, or something similar). |
indicator lights up (if available)- Visiting the website http://docs.bauknecht.eu and parts-selfservice.bauknecht.com
- Using QR Code
- Alternatively, contact our After-Sales Service (See phone number in the warranty booklet).
After-sales Service, please state the codes provided on your product’s identification plate. For User Repair & Maintenance Information visit www.bauknecht.com The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu
Download PDF: Bauknecht WMT6513CC Washing Machine Quick Guide
